BASIC DRILLING AND HEALTH, SAFETY, ENVIRONMENTAL CONSIDERATION

BASIC DRILLING AND HEALTH, SAFETY, ENVIRONMENTAL CONSIDERATION

Bandung | October 18-21, 2011 | IDR 8.250.000,-/ Person

 

SASARAN BELAJAR :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

• Memahami prinsip-prinsip dasar dan berbagai perhitungan sederhana untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan  perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.


• Melakukan diagnosis sederhana dan memengerti penyelesaian dan membuat suatu sumur minyak, gas atau panas bumi.


• Membuat analisis sederhana terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran  kinerja dan merencanakan pengembangannya.


• Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perencanaan lumpur pemboran, semen, hidrolika, well control.


• Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.


• Pengetahuan tentang Peraturan Perundangan dalam K3L


• K3L dalam Operasi Pemboran

Who Should Attend?

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

Outline Course

• Introduction : Rotary Drilling Operations
  
  
  
  • Steps to drilling a well
  
  
  • Types of rigs
  
  
  • Rig Components
  
  
  • Rig Systems
  
  
  
  


• Rheology of Drilling and Completion Fluids
  
  
  
  • Equations and Inflow PerformanceRelationship Functions of Drilling/ Completion Fluids
  
  
  • Fluid Types,
  
  
  • Fluid Models
  
  
  • Introduction to Rotary Viscometer
  
  
  • Other Testing Equipment
  
  
  • Objectives of Monitoring Fluids
  
  
  
  


• Mud System
  
  
  
  • General Equations and Concepts Diagnostic tests
  
  
  • Water based muds
  
  
  • Oil based muds
  
  
  • Additives
  
  
  • Mud handling system
  
  
  
  


• Cementing
  
  
  
  • Tubing Design Functions of cement
  
  
  • Cement Types
  
  
  • Cement Additives
  
  
  
  


• 
  


• Oil Field Tubulars and Hydraulics
  
  
  
  • Drill string
  
  
  • Casing and tubing
  
  
  • Casing classification
  
  
  • Stresses on casing
  
  
  • Casing setting depth
  
  
  • Burst and collapse calculations
  
  
  • Wellheads
  
  
  
  


• Drilling System - Pressure Loss Calculations
  
  
  
  • Hydrostatics
  
  
  • Buoyancy
  
  
  • Flow through pipes and annuli
  
  
  • Flow path
  
  
  • Pressure loss calculations
  
  
  
  


• Drilling System - Bit & Nozzles
  
  
  
  • Hydrostatics Bit Types
  
  
  • Bit Parts
  
  
  • Bit Classification
  
  
  • Bit Nozzles
  
  
  
  


• Introduction to Well Control
  
  
  
  • Hydrostatics Definitions
  
  
  • Causes of kicks
  
  
  • Kick indicators
  
  
  • Shut-in procedure
  
  
  • Well Kill Procedures
  
  
  
  


• Directional Drilling
  
  
  
  • Reasons for directional wells
  
  
  • Planning Trajectory
  
  
  • Kickoff Methods
  
  
  • Survey Methods
  
  
  • Survey Calculations
  
  
  
  


• Health, Safety and Environmental Consideration in Drilling Operation
  
  
  
  • Peraturan Perundangan tentang K3L
  
  
  • Pengauh Gas Beracun pada Operasi Pemboran
  
  
  • Pengaruh  Gas Beracun Bagi Kesehatan
  
  
  • H2S
  
  
  • Gas Detection Equipments
  
  
  • Noise level & exposure in Oil Gas Industry
  
  
  • Noise Mapping
  
  
  
  

Course Leader

Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d'Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation & Dress Code

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner.


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Exclusive flash disk.

**) Optional

Tuition Fee & Registration  Deadline

IDR 8.250.000,-/ Person, Registration deadline a weeks before training held.

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

 

 

Basic Drilling Engineering

Basic Drilling Engineering

Bandung | November 1-4, 2011 | IDR 8.250.000,-/ Person

 

COURSE  OBJECTIVE:

After completing this course participants are expected to be able to:

• Understanding the basic principles and simple calculations for implementation of well-drilling oil wells, gas and geothermal reservoir, develop implementation of this calculation to improve the performance of  well-drilling wells in the field.


• Conduct simple diagnosis and comprehend the settlement and build oil, gas or geothermal wells.


• Create a simple analysis of oil, gas and geothermal wells exploration data, and able to design a global drilling performance and plan its development.


• Conduct the simple quantitative calculations of mapping out for drilling mud, cement, hydraulics, well control.


• Practise knowledges in vertical drilling design, for drilling wells sloping design, horizontal wells both using overbalance and underbalance technology.

 

PRE-REQUISITE:

Backgrounds: Operator, Senior Operator, Engineer/Non Engineer

 

COURSE OUTLINE:

• Introduction : Rotary Drilling Operations
  
  
  
  • Steps to drilling a well
  
  
  • Types of rigs
  
  
  • Rig Components
  
  
  • Rig Systems
  
  
  
  


• Rheology of Drilling and Completion Fluids
  
  
  
  • Equations and Inflow Performance Relationship Functions of Drilling/ Completion
  
  
  • Fluids
  
  
  • Fluid Types,
  
  
  • Fluid Models
  
  
  • Introduction to Rotary Viscometer
  
  
  • Other Testing Equipment
  
  
  • Objectives of Monitoring Fluids
  
  
  
  


• Mud System
  
  
  
  • General Equations and ConceptsDiagnostic tests
  
  
  • Water mud based
  
  
  • Oil mud based
  
  
  • Additives
  
  
  • Mud handling system
  
  
  
  


• Cementing
  
  
  
  • Tubing DesignFunctions of cement
  
  
  • Cement Types
  
  
  • Cement Additives
  
  
  
  


• Oil Field Tubules and Hydraulics
  
  
  
  • Drill string
  
  
  • Casing and tubing
  
  
  • Casing classification
  
  
  • Stresses on casing
  
  
  • Casing setting depth
  
  
  • Burst and collapse calculations
  
  
  • Wellheads
  
  
  
  


• Drilling System - Pressure Loss Calculations
  
  
  
  • Hydrostatics
  
  
  • Buoyancy
  
  
  • Flow through pipes and annuli
  
  
  • Flow path
  
  
  • Pressure loss calculations
  
  
  
  


• Drilling System - Bit & Nozzles
  
  
  
  • Hydrostatics Bit Types
  
  
  • Bit Parts
  
  
  • Bit Classification
  
  
  • Bit Nozzles
  
  
  
  


• Introduction to Well Control
  
  
  
  • Hydrostatics Definitions
  
  
  • Causes of kicks
  
  
  • Kick indicators
  
  
  • Shut-in procedure
  
  
  • Well Kill Procedures
  
  
  
  


• Directional Drilling
  
  
  
  • Reasons for directional wells
  
  
  • Planning Trajectory
  
  
  • Kickoff Methods
  
  
  • Survey Methods
  
  
  • Survey Calculations
  
  
  • Hole Assemblies
  
  
  
  

 

INSTRUCTOR :

Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d'Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

 

 

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

 

Documentation & Dress Code

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner.


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

 

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Exclusive flash disk.

 

Tuition Fee & Registration  Deadline

• IDR 8.250.000,-/ Person


• Registration deadline a weeks before training held.

 

Minimum Participant

This training will be conducted if we receive registration letter from 4 (Four) participants (Minimum)

 

BASIC DRILLING ENGINEERING AND ENVIRONMENTAL SAFE DRILLING PRACTICE

BASIC DRILLING ENGINEERING AND ENVIRONMENTAL SAFE DRILLING PRACTICE

Hotel Grand Seriti Boutique Bandung | 21 – 25  February 2011 | Rp 7.950.000/person
Hotel Grand Seriti Boutique Bandung | 11 – 15  July 2011 | Rp 7.950.000/person

 

TRAINING OBJECTIVES :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

1. Memahami prinsip-prinsip dasar dan berbagai perhitungan untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan  perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.


2. Melakukan diagnosis dan memengerti penyelesaian dan membuat suatu sumur minyak, gas atau panas bumi.


3. Membuat analisis terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran  kinerja dan merencanakan pengembangannya.


4. Melakukan perhitungan-perhitungan kuantitatif untuk perencanaan lumpur pemboran, semen, hidrolika, well control.


5. Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.


6. Pengetahuan tentang Peraturan Perundangan dalam K3L


7. K3L dalam Operasi Pemboran

 

PRE-REQUISITE :

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

 

CAKUPAN MATERI TRAINING :

1.    Introduction : Rotary Drilling Operations

• Steps to drilling a well


• Types of rigs


• Rig Components


• Rig Systems

2.    Rheology of Drilling and Completion Fluids

• Equations and Inflow Performance RelationshipFunctions of Drilling/Completion Fluids


• Fluid Types,


• Fluid Models


• Introduction to Rotary Viscometer


• Other Testing Equipment


• Objectives of Monitoring Fluids

3.    Mud System

• General Equations and ConceptsDiagnostic tests


• Water based muds


• Oil based muds


• Additives


• Mud handling system

4.    Cementing

• Tubing DesignFunctions of cement


• Cement Types


• Cement Additives

5.    Oil Field Tubulars and Hydraulics

• Drill string


• Casing and tubing


• Casing classification


• Stresses on casing


• Casing setting depth


• Burst and collapse calculations


• Wellheads

6.    Drilling System - Pressure Loss Calculations

• Hydrostatics


• Buoyancy


• Flow through pipes and annuli


• Flow path


• Pressure loss calculations

7.    Drilling System - Bit & Nozzles

• Hydrostatics Bit Types


• Bit Parts


• Bit Classification


• Bit Nozzles

8.    Introduction to Well Control

• Hydrostatics Definitions


• Causes of kicks


• Kick indicators


• Shut-in procedure


• Well Kill Procedures

9.    Directional Drilling

• Reasons for directional wells


• Planning Trajectory


• Kickoff Methods


• Survey Methods


• Survey Calculations

10.    Health, Safety and Environmental Consideration in Drilling Operation

• Peraturan Perundangan tentang K3L


• Pengauh Gas Beracun pada Operasi Pemboran


• Pengaruh  Gas Beracun Bagi Kesehatan


• H2S


• Gas Detection Equipments


• Noise level & exposure in Oil Gas Industry


• Noise Mapping

 

 

INSTRUKTUR TRAINING

Dr.Ir. Sudjati Rachmat, DEA. and Team
Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d'Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

 

VENUE :

Hotel Grand Seriti Boutique Bandung

 

TRAINING DURATION :

5 days

 

TRAINING TIME :

• 21 - 25  February  2011


• 11 - 15 July 2011

 

INVESTATION PRICE/PERSON :

1. Rp 7.950.000/person (full fare)  or


2. Rp 7.750.000/person (early bird, payment before one week before training) or


3. Rp 7.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)