BASIC DRILLING AND HEALTH, SAFETY, ENVIRONMENTAL CONSIDERATION

BASIC DRILLING AND HEALTH, SAFETY, ENVIRONMENTAL CONSIDERATION

Bandung | October 18-21, 2011 | IDR 8.250.000,-/ Person

 

SASARAN BELAJAR :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

• Memahami prinsip-prinsip dasar dan berbagai perhitungan sederhana untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan  perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.


• Melakukan diagnosis sederhana dan memengerti penyelesaian dan membuat suatu sumur minyak, gas atau panas bumi.


• Membuat analisis sederhana terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran  kinerja dan merencanakan pengembangannya.


• Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perencanaan lumpur pemboran, semen, hidrolika, well control.


• Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.


• Pengetahuan tentang Peraturan Perundangan dalam K3L


• K3L dalam Operasi Pemboran

Who Should Attend?

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

Outline Course

• Introduction : Rotary Drilling Operations
  
  
  
  • Steps to drilling a well
  
  
  • Types of rigs
  
  
  • Rig Components
  
  
  • Rig Systems
  
  
  
  


• Rheology of Drilling and Completion Fluids
  
  
  
  • Equations and Inflow PerformanceRelationship Functions of Drilling/ Completion Fluids
  
  
  • Fluid Types,
  
  
  • Fluid Models
  
  
  • Introduction to Rotary Viscometer
  
  
  • Other Testing Equipment
  
  
  • Objectives of Monitoring Fluids
  
  
  
  


• Mud System
  
  
  
  • General Equations and Concepts Diagnostic tests
  
  
  • Water based muds
  
  
  • Oil based muds
  
  
  • Additives
  
  
  • Mud handling system
  
  
  
  


• Cementing
  
  
  
  • Tubing Design Functions of cement
  
  
  • Cement Types
  
  
  • Cement Additives
  
  
  
  


• 
  


• Oil Field Tubulars and Hydraulics
  
  
  
  • Drill string
  
  
  • Casing and tubing
  
  
  • Casing classification
  
  
  • Stresses on casing
  
  
  • Casing setting depth
  
  
  • Burst and collapse calculations
  
  
  • Wellheads
  
  
  
  


• Drilling System - Pressure Loss Calculations
  
  
  
  • Hydrostatics
  
  
  • Buoyancy
  
  
  • Flow through pipes and annuli
  
  
  • Flow path
  
  
  • Pressure loss calculations
  
  
  
  


• Drilling System - Bit & Nozzles
  
  
  
  • Hydrostatics Bit Types
  
  
  • Bit Parts
  
  
  • Bit Classification
  
  
  • Bit Nozzles
  
  
  
  


• Introduction to Well Control
  
  
  
  • Hydrostatics Definitions
  
  
  • Causes of kicks
  
  
  • Kick indicators
  
  
  • Shut-in procedure
  
  
  • Well Kill Procedures
  
  
  
  


• Directional Drilling
  
  
  
  • Reasons for directional wells
  
  
  • Planning Trajectory
  
  
  • Kickoff Methods
  
  
  • Survey Methods
  
  
  • Survey Calculations
  
  
  
  


• Health, Safety and Environmental Consideration in Drilling Operation
  
  
  
  • Peraturan Perundangan tentang K3L
  
  
  • Pengauh Gas Beracun pada Operasi Pemboran
  
  
  • Pengaruh  Gas Beracun Bagi Kesehatan
  
  
  • H2S
  
  
  • Gas Detection Equipments
  
  
  • Noise level & exposure in Oil Gas Industry
  
  
  • Noise Mapping
  
  
  
  

Course Leader

Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d'Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation & Dress Code

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner.


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Exclusive flash disk.

**) Optional

Tuition Fee & Registration  Deadline

IDR 8.250.000,-/ Person, Registration deadline a weeks before training held.

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

 

 

BIOREMEDIATION: Updating of Technology and Application

BIOREMEDIATION: Updating of Technology and Application

Bandung|July 12-15 2011 | IDR 8.250.000,-/ Person

In this practical course (3-day in-class training combining with 1-day field and laboratory practice), participants will learn from and discuss with professional instructors about the following subjects:

• Detail aspect of bioremediation.


• Microbial process as the key factor in the bio degradation


• Sophisticated ex-situ and in-situ bioremediation technique for hazardous organic pollutants such as oil sludge, solvent or pesticides (as halogenated compounds).


• Application of bioremediation technique for treatment of industrial waste.


• Selecting appropriate bioremediation technique for certain conditions.


• Waste problem solving in oil and gas industry.


• Newest microorganism species, which is the most effective for bioremediation technology.

 

Crucial Benefits from attending:

• Get the clearer understanding of bioremediation technique.


• Strengthen your perspective on handling your oil spill, sludge and waste problems.


• Improve the capability of your company on environmental protection including immediate action on any oil spill, leak, and accidental spillage.

 

Who Should ATTEND?

Petroleum Engineer, Environmental Engineer, Chemistry Engineer, Production Engineer, Supervisor and Manager in mining and petrochemical industry, anyone who has relation and responsible to environmental recovery and restoration.

 

Instructors:

Dr. Edwan Kardena is a leading scientist and engineer in the field of microbial process for bioremediation of organic and toxic chemicals, such as petroleum hydrocarbons and halogenated compounds. He obtained his Ph.D. degree from the University College of Wales in Cardiff, United Kingdom in the field of Environmental Microbiology/Biotechnology in 1995. He is currently known as a lecturer in the Department of Environmental Engineering ITB.

Dr. Sri H. Suhardi is an environmental microbiologist and currently known as a researcher at the Inter University Center for Research on Biotechnology. Her major interest is in the use of fungi and biocatalyst for treatment of industrial waste. She has extensively been working with phenolic compounds such as chlorophenol. She got her Ph.D. degree from University of Kent at Canterbury, United Kingdom in 1995.

They have been participating on various courses organized by the government such as BAPPEDAL, PUSARPEDAL, PEMDA, etc.  Both of them are consultant and team mate in doing a lot of training project at multinational companies, such as Chevron Pacific Indonesia, ExxonMobil Oil Indonesia, Vico Indonesia, Total E&P Indonesie, ConocoPhillips Indonesia Limited, Chevron Indonesia Company, PetroChina, Pertamina, Petronas, Freeport, etc.

General Information

 

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

 

Documentation

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

 

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included calculator, T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Convenient training facilities with five star quality


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Local drop and pick up for arrival and departure between airport to hotel.


• Half day city tour at the end of training session following by dinner with entertainment  (Optional)


• Exclusive flash disk.

 

Tuition Fee & Registration  Deadline

• IDR 8.250.000,-/ Person


• Registration deadline a weeks before training held.

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

WATER TREATMENT-(Hampir Jalan)

WATER TREATMENT

Hotel Banan Inn,  Bandung | 23 – 27 May 2011| Rp 7.950.000 (Hampir Jalan)
Hotel Banan Inn,  Bandung |17 – 21 October 2011| Rp 7.950.000

INTRODUCTION :

Water is the blood of an industry. It is used as process water, cooling water, boiler feed water, drinking water, or in general as utility, in any industry such as chemical and petrochemical industry, fertilizer, mining, steel making, automotive, pulp & paper, textile, food processing, agricultural, municipal, power plant, and many other uses.

The sources of industrial water varies from river, lake, and other surface waters, well water, sea water, or produced water. The raw water is then treated, to some extent, to fulfill the specific requirements of that industry, and the environmental regulation. The treatment may also vary from one to another industry.

 

TRAINING OBJECTIVES :

After completion of this course, participants will understand what and how important industrial water is, how to treat different intake waters for different purposes, what the core of water treatment technology is, what equipment and chemicals should be used, how each equipment works, and how to evaluate the results of each specialized treatment. Participants will know what, why and how to treat waste water for disposal, to fulfill environmental requirements.

 

WHAT WILL YOU LEARN ?

By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more detail about many aspects of the nature of water, different properties of raw waters, water and impurities analysis and its interpretation, internal and external treatment processes, roadmap of water treatment technology, equipment used and its operations, boiler feed water treatment, cooling water treatment, corrosion, fouling and scale controls, waste water treatment, biological treatment, waste water disposal, environmental regulation, discuss and consult their specific problems they are about to bring to the class, and share experiences with others.

 

TRAINING HIGHLIGHT :

1. The Nature and Sources of Water


2. Water Constituents of Different Sources


3. The Chemistry and Analysis of Water and its Impurities


4. Characteristics of Surface Water, Seawater and Produced Water


5. Suspended and Dissolved Material Parameters and Indexes


6. Water Treatment Technology, System, Equipment, Operations and Chemicals


7. External and Internal Intake Water Treatment


8. Process Water, Cooling Water, Drinking, and Boiler Feed Waters Treatment


9. Specialized Industrial Water Treatment


10. Physical, Chemical and Biological Waste Water Treatment


11. Water Treatment Examples and Case Studies

 

TRAINING MATERIAL OUTLINE :

1. Hydrology cycle, chemistry and properties of water


2. Typical characteristics of river, lake and surface waters


3. Typical characteristics of well and produced waters


4. Analysis and interpretation of TSS, TDS and dissolved gases


5. Acidity, alkalinity, salinity, hardness, BOD and COD


6. Heavy metals and hazardous chemical contents


7. Organics, bacteriological matter and added materials


8. Corrosion and scaling tendency indexes


9. Industrial intake water handling, conditioning and pretreatment


10. Treating objectives and roadmap of external processing


11. Suspended solids removal methods


12. Dissolved solid treatment and dissolved gases removal methods


13. Sedimentation, coagulation, flocculation, aeration and filtration


14. Ion exchange equipment and operation


15. Roadmap of internal treatment


16. Carbonate hardness and alkalinity control


17. Chemical treating for control of bacteria and fouling


18. Chemical treating for control of scale


19. Corrosion control techniques and the use of biocides


20. The use of surfactant and foaming control agent


21. Corrosion and scale prediction, calculation methods and the use of scale index and saturation index


22. Typical boiler feed water treatment


23. Treatment with chelating agent chemicals


24. Deaeration and oxygen scavenging equipment and operations, and condensate treatment


25. Typical cooling water treatment


26. Selection and the use of corrosion inhibitors in cooling water


27. Environmental problems due to sludge, residual additive chemicals, hazardous components and residual oil in water to disposal


28. Typical waste water treatment; physical, chemical and biological


29. Safety in industrial water treatment


30. Examples and case studies in industrial water treatment

 

WHO SHOULD ATTEND THIS TRAINING?

This course is designed as an effective practical shortcut to understand industrial water treatment technology, for either utility engineers or non-technical personnel, and anyone who involve in raw water intake, water handling, conditioning, processing and distribution, specialized water treatment, waste water treatment and disposal, and other water related business activity.

The course content and approach are designed to suit participants of different background and different position in the company. It will be delivered as a to-the-point explanation by a professional instructor, utilizing an easy-to-understand examples and illustrations, especially the actual cases in Indonesia.

 

TRAINING INSTRUCTOR

Ir. Hilman Ahmad, DCE

Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

VENUE :

Hotel Banana Inn Bandung

 

TRAINING DURATION :

5  days

 

TRAINING TIME :

1. 23 – 27 May 2011


2. 17 – 21 October 2011

 

INVESTATION PRICE/ PERSON :

1. Rp 7.950.000/person (full fare)  or


2. Rp 7.750.000/person (early bird, payment 1 week before training) or


3. Rp 7.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS :

1. Training Module


2. Flash Disk contains training material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. T-Shirt


6. Bag


7. Training Photo


8. Training room with Full AC facilities and multimedia


9. Lunch and twice coffeebreak every day of training


10. Qualified Instructor


11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

RECOMMENDATION TO PARTICIPANTS :

Participants are recommended to bring laptop for practice sessions

 

PRODUCED WATER TREATMENT for Re-Injection- BANDUNG

PRODUCED WATER TREATMENT for Re-Injection

Banana Inn Hotel, BANDUNG , Indonesia | April 04-07, 2011 | US$  1090.00/company

WHY SHOULD YOU ATTEND THIS COURSE

Produced water is the largest single fluid stream in exploration and production operations. It consists of formation water, or flood water previously injected in to the formation. Generally, produced water may be injected with minimal treatment. If the injected water contains solids large enough to plug the formation, injectivity will decline. Downhole solids contributing to plugging may include not only the solids escaping filtration, but solids generated after water treatment (eg corrosion, scale, and bacterial products). Consequently, stringent corrosion inhibition, scale inhibition and bacterial control, as well as filtration, may be required for matrix rate injection.

This course is designed as an effective practical shortcut to understand produced water chemistry, the main water contaminants, corrosion and bacterial problems, mineral scale formation, equipment and pipeline plugging, injection well and formation plugging, the method and operation of produced water treatment for reinjection, for either surface operation engineers or subsurface petroleum engineers, and anyone who involve in produced water handling, treatment, and related business activity.

The course content and approach are designed to suit participants of different background and different position in the company. It will be delivered as a to-the-point explanation by a professional instructor, utilizing an easy-to-understand examples and illustrations, especially the actual cases in Indonesia.

WHAT WILL YOU LEARN FROM THIS COURSE

By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more detail about many aspects of produced water handling and reinjection, know more how to treat the water and control corrosion, scaling, and bacterial action, understand how to select and use chemicals for treatment and operation of each equipment used for treatment, discuss and consult their specific problems they are about to bring to the class, and share experiences with others.

After completion of this course, participants will understand what produced water is and its fantastic devastating potential to surface facility, well, and formation, how to predict and monitor its characteristics, why and how to perform treatment before reinjection, and how to control and prevent these big and serious problems caused by produced water in the oil & gas field. Participants will know what the minimum requirements for produced water before reinjection and what to do to achieve that requirements.

COURSE HIGHLIGHTS

• The Chemistry and Analysis of Water and the Impurities Constituents


• Characteristics of Produced Water, Formation Water, Surface and Sea Water


• Suspended and Dissolved Material Parameters and Oil in Water Concentration


• Surface Water, Sea Water and Produced Water Injection Examples and Case Studies


• Sour Corrosion, Microbial Induced Corrosion and Mineral Scaling Problems and Control Methods


• Corrosion and Scale Prediction Methods, Calculation, Testing and the related Standards


• Water Quality for Injection and Produced Water Quality Rating Methods


• Guidelines for Produced Water Reinjection


• Methods and Equipment for Produced Water Treatment before Reinjection and their Operations


• Pressure Build-up and Confinement Problems and Solutions


• Practical Application of Produced Water Treating Technology for Land-based and Offshore Injection Operations


• Reinjection Examples and Case Studies

COURSE CONTENT

• Oilfield waters, suspended oil and dissolved oil


• Suspended   solids,   dissolved   solids   and dissolved gases


• Bacteriological matter and added materials


• Produced   water   treating   objectives   andtechnology


• Suspended solid removal


• Suspended oil removal


• Chemical treating for control of bacteria


• Chemical treating for the control of scale


• Corrosion control techniques and the use of biocides


• Other chemical treatment needs in produced water treatment


• Determination of water analysis pattern (Stiff-Davis, Oddo-Thomson) and scale prediction calculation methods


• The use of scale index, saturation index andits practical calculation methods


• Practical   guide   for   evaluation   of   scale inhibition performance


• Detection  and assessment of bacteria  in produced water and API field determination method & interpretation of bacteria counts


• Methods and chemicals use for produced water corrosion inhibition and bacteria control


• Practical guide for evaluation of corrosion inhibition performance and biocides application


• Skim vessel, wash tank, and corrugated plate interceptor for solids, oil and gas removal


• Filtering  with  granular media  filters and separation with hydro-cyclone and flotation


• Gas stripper, caustic neutralizer and gas flotation unit for dissolved acid gas removal


• Deaeration     and     chemical     scavenging equipment and their operations Practical application of the technology Road-map of water treatment for disposal and reinjection


• Location & remoteness of the facility and availability of services


• Typical produced water treating and disposal scheme


• Geochemical   and   physical   properties   of injected     produced     water     and     its compatibility with connate waters Prediction of H2S generation in producing reservoirs


• Produced   water   quality   in   relation   to injectivity and operations Slug flow in pipeline caused by sludge, slime, solids, oil and gases


• Anticipation of pitting and sulfide stress corrosion cracking on pipeline and surface equipment


• Plugging of injection well and clogging of perforation caused by inorganic scale deposition


• Formation & down-hole damage caused by invasion of rock by fine solids, clay swelling and peptization


• Monitoring of injection pressure and injection fluid properties


• Pressure build-up and confinement problems Environmental   problems   due   to   sludge, residual   additive   chemicals,   hazardous components and residual oil in water to disposal


• Safety in oil & gas field produced water handling and treatment Case studies in sea water injection and produced water reinjection

INSTRUCTOR

This specially designed course will be conducted by *Hilman Ahmad & Associates*, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Bandung Industrial Oil & Gas Education Center, and has been practicing production operation and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000. He has been delivering training course in production operation and maintenance and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

GENERAL INFORMATION

DOCUMENTATION

Integrated Quality Training Material (HARDCOPY AND SOFTCOPY) & Quality Training Kits will be delivered on registration, additional papers & handouts assignment by Our Partner. I   Note-taking by participants is encouraged. However, to ensure free and open discussions, no formal records will be kept.

 

CERTIFICATE OF APPRECIATION

All attendees will receive a Certificate of Appreciation attesting to their participation in the Training. This certificate will be providing in exchange for a completed Training Questionnaire.

 

TRAINING VENUE

Banana Inn Hotel, BANDUNG, Indonesia

 

DRESS CODE:

Casual Clothing is recommended. The Training atmosphere is informal

 

REGISTRATION FEE:

Registration Deadline: March 28, 2011US$ 1090.00/person from 1 (one) CompanyUS$ 990.00/person for more than 3 (Three) Participants from 1 (one) Company

 

Fee includes the following:

• Three-day registration fee for all Training sessions;


• Lunch per day


• Daily coffee/tea breaks


• Integrated Quality Training Materials (SOFTCOPY AND HARDCOPY)


• Quality Training Kits,


• Convenient Training Facilites,


• Certificate Of. Complecion

 

REGISTRATION POLICY

• Registration Form MUST be return in advance for attending the Training


• Full fixed fee is charged regardless of the length of time that registrant attends the Training


• Attendees are expected to attend all Training sessions and are not permitted to attend on a partial basis.

 

CANCELLATION & REFUND POLICY

• Cancellation received after the registration deadline, -, 2009 entitles the registrant to


• received 25% refund.


• Cancellation on the date will be recharged 100% from the fee


• No refund will be issued, if a registrant fails to show up at the Training on-site.

 

For additional course dates and locations, and registration please fill in form below:

BIOREMEDIATION: To Solve Oil Sludge, Spill and Waste

BIOREMEDIATION: To Solve Oil Sludge, Spill and Waste

The Luxton Hotel, BANDUNG|March 28-31, 2011 | US$ 990,-/participant

 

Instructor: Ir. Edwan Kardena, Ph.D

Bioremediation is a method that treats the soils and renders them no-hazardous, thus eliminating any future liability that may result from landfill problems or violations.

 

WHAT WILL YOU LEARN FROM THIS COURSE?

If you attending this course, you will learn and make a discussion with Instructor and other participants about:

• Basic Principles of Bioremediation


• Microbial process as the key factor in the bio degradation


• Sophisticated ex-situ and in-situ bioremediation technique for hazardous organic pollutants such as oil sludge, solvent or pesticides (as halogenated compounds).


• Application of bioremediation technique for treatment of industrial waste.


• Selecting appropriate bioremediation technique for certain conditions.


• Waste problem solving in oil and gas industry.


• Newest microorganism species, which is the most effective for bioremediation technology.

 

what will YOU get after attending this course?

After you accomplish this training, we hope you will:

• Get the clearer understanding of bioremediation technique.


• Strengthen your perspective on handling your oil sludge and oil waste problems.


• Improve the capability of your company on environmental protection including immediate action on any oil spill, leak and accidental spillage.

 

WE INVITE:

• Petroleum Engineer


• Environmental Engineer


• Chemistry Engineer


• Production Engineer


• Supervisor and Manager from Oil, Gas and Mining Industry

 

IN THIS IMPROVING TRAINING, YOU WILL LEARN ABOUT:

Introduction

• Bioengineering


• Bioremediation engineering


• Managing Bioremediation Project

Microbial System of Bioremediation

• Microbial metabolism


• Microbiology of bioremediation


• Bioprocess control parameter

Optimizing Microbial Transformation of Hazardous Chemicals

• Aerobic and anaerobic metabolism


• Degradation of petroleum hydrocarbon


• Biodegradation of halogenated compounds

Site Characterization for Bioremediation

• Assessment for Biological Process


• Assessment for In-situ Bioremediation


• Assessment for Ex-situ Bioremediation


• Assessment for Process Control

Ex-situ Bioremediation Technique

• Preparation


• Site Excavation


• Processing


• Monitoring


• Evaluation

In-situ Bioremediation Technique

• Preparation


• Construction


• Monitoring


• Evaluation

Bioremediation of Oil Sludge

• Sludge Characterization


• Biodegradability Test


• Bioremediation Design


• Monitoring & Evaluation

Bioremediation of Other Industrial Organic Pollutant

• Biological Process for Liquid Waste


• Activated Sludge for Oily

 

Schedule, tuition & facilities :

Language : Bahasa Indonesia
Text & Handouts : English & Bahasa Indonesia
Venue : Banana Inn Hotel, BANDUNG

• Date                               :March 28-31, 2011 at The Luxton Hotel, BANDUNG


• Duration                    : 4 days

Facilities :

Three-day registration fee for all Training sessions; Quality Training Material (Hardcopy and Softcopy); Quality Training Kits (Casio Calculator, T-Shirt, etc); Convenient Training Facilities at Four Star Hotel; Refreshment and luncheons, Certificate of Completion, Dinner with entertainment at the cozy restaurant

Registration Fee:

• US$ 990,-/participant


• Exclude accommodation & 10% Tax


• Registration Deadline: March  21,2011

 

OUR INSTRUCTOR

Ir. Edwan Kardena, PhD

He is a leading scientist and engineer in the field of microbial process for bioremediation of organic and toxic chemicals, such as petroleum hydrocarbons and halogenated compounds. He obtained his Ph.D. degree from the University College of Wales in Cardiff, United Kingdom in the field of Environmental Microbiology/Biotechnology in 1995. He is currently known as a lecturer in the Department of Environmental Engineering ITB.

 

For additional course dates and locations, and registration please contact us via form below:

Produced Water Treating and Disposal into Injection Well

Produced Water Treating and Disposal into Injection Well

Bali | October 11-14, 2011|  IDR 8.950.000,-/ Person
Bandung| November 15-18, 2011|  IDR 8.950.000,-/ Person

 

This special practical approach course is designed to provide a comprehensive under-standing of oil field water technology, especially produced water treating and disposal, to match injection well and environmental requirements. Each equipment and operations considerations base on basic concept of prevention of the system plugging and the need and regulation on water disposal to injection well and offshore environment.

 

What Will Participant Get?

After completion of this course, participants will better understand and analyze specific water quality, in-field water treating and disposal scheme and operations, configuration and operational mechanism of each equipment, test methods and procedures, and improve skill and ability to diagnose water treating system performance and utilize laboratory analyses results.

 

Who Should Attend?

Technical personnel of Oil & Gas Company who involve in or concern with oil field water handling, water treating, water disposal, injection well, onshore and offshore environmental management, MIC and scale control and prevention, chemical injection application, water treating equipment operations, pipeline and pumping operations and laboratory analyses,  and those who responsible on the continuity, integrity and reliability of produced water transportation, injection and disposal system and equipment.

 

What Will Participant Learns?

In this tailor made course participants will learn from and discuss with professional instructor the following subjects:

1.       Produced Water Injection and Disposal in Oil & Gas Field

2.       Problem-Causing Factors in Oil Field Water Handling

3.       Injection Well and Environmental Requirements

4.       Water Treating Operations and Equipment

5.       Test Methods, Analyses and Calculations in Water Treating and Disposal

 

Instructor:

This specially designed course will be conducted by *Hilman Ahmad & Associates*, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Professional Industrial Oil & Gas Education Center, and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000. He has been delivering training course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979. ***

 

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

 

Documentation & Dress Code

• Quality training material kits will be on registration, additional papers, & handouts assignment by TIM.


• Note-taking by participants is encouraged. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

 

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included calculator, T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Convenient training facilities with five star quality


• Lunch per day with morning and afternoon coffee breaks


• Certificate of Completion


• Half day city tour at the end of training session following by dinner with entertainment (Optional)


• Exclusive flash disk.

 

Tuition Fee & Registration  Deadline

IDR 8.950.000,-/ Person, Registration deadline a weeks before training held.

 

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

 

BASIC DRILLING ENGINEERING AND ENVIRONMENTAL SAFE DRILLING PRACTICE

BASIC DRILLING ENGINEERING AND ENVIRONMENTAL SAFE DRILLING PRACTICE

Hotel Grand Seriti Boutique Bandung | 21 – 25  February 2011 | Rp 7.950.000/person
Hotel Grand Seriti Boutique Bandung | 11 – 15  July 2011 | Rp 7.950.000/person

 

TRAINING OBJECTIVES :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

1. Memahami prinsip-prinsip dasar dan berbagai perhitungan untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan  perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.


2. Melakukan diagnosis dan memengerti penyelesaian dan membuat suatu sumur minyak, gas atau panas bumi.


3. Membuat analisis terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran  kinerja dan merencanakan pengembangannya.


4. Melakukan perhitungan-perhitungan kuantitatif untuk perencanaan lumpur pemboran, semen, hidrolika, well control.


5. Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.


6. Pengetahuan tentang Peraturan Perundangan dalam K3L


7. K3L dalam Operasi Pemboran

 

PRE-REQUISITE :

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

 

CAKUPAN MATERI TRAINING :

1.    Introduction : Rotary Drilling Operations

• Steps to drilling a well


• Types of rigs


• Rig Components


• Rig Systems

2.    Rheology of Drilling and Completion Fluids

• Equations and Inflow Performance RelationshipFunctions of Drilling/Completion Fluids


• Fluid Types,


• Fluid Models


• Introduction to Rotary Viscometer


• Other Testing Equipment


• Objectives of Monitoring Fluids

3.    Mud System

• General Equations and ConceptsDiagnostic tests


• Water based muds


• Oil based muds


• Additives


• Mud handling system

4.    Cementing

• Tubing DesignFunctions of cement


• Cement Types


• Cement Additives

5.    Oil Field Tubulars and Hydraulics

• Drill string


• Casing and tubing


• Casing classification


• Stresses on casing


• Casing setting depth


• Burst and collapse calculations


• Wellheads

6.    Drilling System - Pressure Loss Calculations

• Hydrostatics


• Buoyancy


• Flow through pipes and annuli


• Flow path


• Pressure loss calculations

7.    Drilling System - Bit & Nozzles

• Hydrostatics Bit Types


• Bit Parts


• Bit Classification


• Bit Nozzles

8.    Introduction to Well Control

• Hydrostatics Definitions


• Causes of kicks


• Kick indicators


• Shut-in procedure


• Well Kill Procedures

9.    Directional Drilling

• Reasons for directional wells


• Planning Trajectory


• Kickoff Methods


• Survey Methods


• Survey Calculations

10.    Health, Safety and Environmental Consideration in Drilling Operation

• Peraturan Perundangan tentang K3L


• Pengauh Gas Beracun pada Operasi Pemboran


• Pengaruh  Gas Beracun Bagi Kesehatan


• H2S


• Gas Detection Equipments


• Noise level & exposure in Oil Gas Industry


• Noise Mapping

 

 

INSTRUKTUR TRAINING

Dr.Ir. Sudjati Rachmat, DEA. and Team
Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d'Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

 

VENUE :

Hotel Grand Seriti Boutique Bandung

 

TRAINING DURATION :

5 days

 

TRAINING TIME :

• 21 - 25  February  2011


• 11 - 15 July 2011

 

INVESTATION PRICE/PERSON :

1. Rp 7.950.000/person (full fare)  or


2. Rp 7.750.000/person (early bird, payment before one week before training) or


3. Rp 7.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

 

OIL SPILL - OIL BOOM AND ENVIRONMENTAL MANAGEMENT

OIL SPILL - OIL BOOM AND ENVIRONMENTAL MANAGEMENT

Hotel Grand Seriti Boutique, Bandung | 07 – 10 Februari 2011 | Rp7.250.000

OBJECTIVE :

After attending the training, participants have knowledge about oil characteristic, environmental impacts, fate of oil in the environment, and how to manage oil spill /oil boom including prevention and countermeasure as well as contingency planning and responding to oil spill/boom

 

TRAINING MATERIAL OUTLINE :

1. Oil Characteristic: Petroleum and Non Petroleum Oil


2. The Behavior and Effect of Oil Spill and Oil Boom in the Aquatic Environment
   
   
   
   • Impact on Species
   
   
   • Impact on Habitats
   
   
   
   


3. Oil Spill and Boom Location: Geology of Shorelines, The Fate of Spilled Oil Cleaning Up, Containment and Recovery of Oil Spills and Booms Response Techniques
   
   
   
   • Booms
   
   
   • Skimmers
   
   
   • Sorbets
   
   
   • Dispersing Agents
   
   
   • Gelling Agents
   
   
   • Biological Aspects
   
   
   
   


4. Alternative Countermeasures for Oil Spills and Oil Booms


5. Shoreline Cleanup of Oil Spills and Oil Booms


6. Preparing for Oil Spills and Booms: Contingency Planning


7. Responding to Oil Spills and Oil Booms


8. Remediation


9. Case Study in the Field


10. Discussion

 

TRAINING INSTRUCTOR

Ir. Sudiharto, MT. and Team

Ir. Sudiharto, MT,  is alumnus from Bandung Institute of Technology (ITB) department of petroleum engineering. Ir. Sudiharto besides as instructor and researcher at Geothermal Laboratory ITB, he is also being as Production Engineer at LAPI ITB, Production & Reservoir Analist and  expert board (Dewan Pakar) at Forum Komunikasi Daerah Penghasil Migas, and joining in Community Development Team Dirjen Migas since 2003.

Some projects have been handled by him such as policy analysis expert on oil and gas subsector, oil and gas production expert, and field economicity such as: projection study investation potency energy and mineral resources, implementation study national energy consumtion, study on field use of Brownfield in Indonesia, inventarization research of old well potential in regency of Muaro Jambi,  blueprint arrangement manpower on oil and gas subsector, development operation cost estimation system oil and gas: geological and geophysical stage, study of combustion flare gas at PERTAMINA DOH Jawa Bagian Barat, survey and development of GIS based datas for planning and distribution BBM  and transportation gas through pipe, study on planning of Indonesia – Asean pipeline system, etc. Ir. Sudiharto have trained for training class for many companies in Indonesia. Some topics that have been frequently delivered by him as follows :

1. Electric Submercible Pump, Problem and Trouble Shooting Mecanism


2. Crude Oil Analysis


3. Drilling, Production and Workover Strategy


4. Well Workover and Completion Stretegy


5. Petroleum Finance, Acconting and Reservoir Management


6. Plan of Development in Oil and Gas Industries


7. Pressure Control for Drilling Engineer


8. Plan of Development (POD) & Authorization For Expenditures (AFE)


9. Management Skills Secretary Petroleum Gas and Oil Industries


10. Pressure Transient Analysis and Well Testing Data Interpretation


11. Oil Production System and Operation


12. Formation Damaged and Well Stimulation


13. Simulasi Reservoir for Petroleum Engineer


14. Oil and gas transportation/measurement, etc

 

VENUE :

Hotel Grand Seriti Boutique Bandung

 

TRAINING DURATION :

4 days

 

TRAINING TIME :

07 – 10 Februari 2011

 

INVESTATION PRICE/ PERSON :

1. Rp  7.250.000/person (full fare)  or


2. Rp  7.000.000/person (early bird, payment before 31 January 2011) or


3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS :

1. Training Module


2. Training CD contains training material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or waistcoat or T-Shirt


6. Bag or backpackers


7. Training Photo


8. Training room with full AC facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified instructor


11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

PRINCIPLES AND BASIC DESIGN OF OIL, GAS AND PETROCHEMICAL SOLID WASTE AND WASTE WATER TREATMENT

PRINCIPLES AND BASIC DESIGN OF OIL, GAS AND PETROCHEMICAL SOLID WASTE AND WASTE WATER TREATMENT

Titan Center, Bintaro / Hotel di Jakarta | 29 - 30 November 2010 | Rp. 3.750.000 –

LATAR BELAKANG

Indonesia memiliki begitu banyak industri pengolahan minyak, gas dan petrokimia. Peraturan yang sangat dan semakin ketat diterapkan pada industri ini karena industri ini mengeluarkan emisi gas, partikel, limbah padat dan limbah cair yang mengandung bahan-bahan yang tergolong berbahaya dan beracun (B3). Para praktisi semakin dituntut untuk mampu mengenali jenis dan karakteristik B3 yang terkait dengan industri sebelum menentukan sistem pengolahan yang tepat.

Beberapa perusahaan mengalami perubahan pada jenis, kualitas serta kuantitas limbah dan emisi yang dihasilkan. Hal tersebut dapat disebabkan adanya dinamika pada proses produksi. Oleh sebab itu, pengetahuan mengenai proses produksi yang lazim terjadi dalam industri-industri ini juga akan memperkaya wawasan serta memberi dukungan dalam manajemen serta mengoperasikan pengolahan limbah dan emisi gas. Seiring dengan perkembangan teknologi, para pengelola pengolahan limbah dan emisi perlu mendapatkan state of the art, yaitu gambaran perkembangan metode dan teknologi yang tersedia hingga termutakhir dari sistem Pengolahan limbah dan emisi gas. Kami juga merancang pelatihan ini untuk memberikan pengetahuan praktis mengenai desain dan pemecahan masalah yang dihadapi dalam mendesain Pengolahan Limbah.

TUJUAN

Pelatihan ini bertujuan untuk memberikan bekalan pengetahuan dasar dan praktis dalam sistem pengolahan emisi gas buang dan limbah cair serta limbah padat pada industri yang melibatkan proses dan produk minyak, gas dan petrokimia. Peserta pelatihan juga diharapkan akan memiliki kemampuan praktis dan menganalisa serta mendesain secara sederhana untuk mengalami perubahan baik dalam hal jenis limbah, kualitas maupun kuantitasnya.

MATERI

• Pengenalan Karakteristik Proses dan Produk dari Industri Minyak, Gas dan Petrokimia


• Jenis-jenis limbah padat, limbah cair dan emisi gas buang


• Hukum dan peraturan terkait limbah padat, limbah cair dan emisi gas buang


• Studi Kasus 1: Pembahasan Masalah Peserta


• Kontrol Emisi Gas dan Partikel


• Sistem dan desain Pengolahan Limbah Padat


• Sistem dan desain Pengolahan Limbah Cair


• Studi Kasus 2: Desain Pengolahan Limbah Padat Cair dan Emisi Gas

INSTRUKTUR

Dr.-Ing. Misri Gozan, M.Tech

Beliau adalah salah seorang yang memiliki lebih dari 16 tahun pengalaman dalam pengajaran, pelatihan, penelitian dan project yang berkaitan dengan Pengolahan Emisi dan Limbah industri serta Lingkungan Hidup terutama dalam industri perminyakan, gas dan petrokimia. Selama mengenyam pendidikan Doktor di Jerman (Technical University of Dresden, 2000-2004) di bidang Environmental Engineering, beliau bekerja paruh waktu pada Technologiezentrum Wasser (TZW) yang bergerak dalam bidang pengolahan air. Pengalaman pada pengolahan limbah padat industri petrokimia juga diperoleh saat menuntut gelar Master in Process and Environmental Engineering pada Massey University – Selandia Baru setelah menamatkan pendidikan S1 pada Teknik Gas dan Petrokimia, Universitas Indonesia.  Selain itu, beliau aktif dalam mengikuti berbagai pelatihan didalam dan luar negeri yang berkaitan dengan Leadership, Management & Environment. Saat ini beliau tercatat sebagai salah seorang staf pengajar tetap pada Departemen Teknik Kimia (dulu bernama  Gas & Petrokimia) pada sebuah pendidikan negri ternama di Depok untuk jenjang S1 , S2 serta S3.  Selain mengajar, beliau juga aktif sebagai trainer dan konsultan lingkungan pada berbagai lembaga konsultasi dan sudah menyelesaikan berbagai project yang berkaitan dengan Pengolahan Air Bersih, Pengolahan Limbah dan Lingkungan

MANFAAT

Praktisi pengelola pengolahan limbah dan emisi pada industri yang terkait dengan pengolahan minyak, gas dan bahan-bahan petrokimia.Para praktisi lingkungan hidup dan penulis AMDAL serta UKL UPL juga akan mendapatkan pengetahuan yang bermanfaat bagi tugas-tugas mereka.

METODE

Ceramah/kuliah, Diskusi, Studi kasus dan simulasi, Presentasi kelompok

PESERTA

Perencana, pengelola dan pelaksana pada pengolahan air limbah perumahan ataupun industry pengolahan minyak, gas dan petrokimia.

INVESTASI

• Rp. 3.500.000 – (Registrasi 1 minggu sebelum pelatihan)


• Rp. 3.750.000 – (Full Registrasi)


• Investasi  5 orang untuk 1 perusahaan/Group ,GRATIS investasi untuk orang ke- 6.

WASTE HANDLING IN THE OIL, GAS & GEOTHERMAL INDUSTRIES

WASTE HANDLING IN THE OIL, GAS & GEOTHERMAL INDUSTRIES

Bandung | July 6-9, 2010| IDR 8.250.000,-/ Person

 

Background

Handling and disposal of wastes generated in oil and gas exploration and production has received significant attention in recent years. This heightened interest has been a result of the public and regulatory agencies focus on environmental protection. Because of this, the oil industry has directed emphasis on waste handling and disposal to ensure that these wastes are properly managed.

From company's perspective, proper waste management is an important part of doing business. As a company, they must be concerned with compliance with applicable waste regulations, minimizing the impact of wastes on the environment, and the reduction of potential liability associated with improperly disposed waste. This must be accomplished within certain economic bounds. Also eliminating or minimizing the generation of waste is becoming more critical, both environmentally and economically, as a means of reducing waste-related liabilities and costs.

The 3 day course covers regulations and waste management basics, from generation to disposal.  The curriculum is designed to provide the information needed as a waste professional, regardless of skill level. 

The Waste Management course is a must attend for all individuals with overall waste compliance responsibilities.  This course provides the tools needed for the job.

 

Who Should Attend?

Managers, supervisors, environmental coordinators and/or engineer, health and safety coordinators, and consultants all benefit from this training.  Many of our participants attend because they have responsibility to back up the designated environmental coordinator at the facility.

Superintendent and Supervisor of Operational function, Legal Counsel, Waste Management Team, Transportation and Logistics Division as well as Health, Safety & Environmental senior staff.

The recommended participant may include key personnel whose activities are most likely to impact the environment and or producing industrial

 

What will the participant get?

Upon completion of the training, the participants will have improvement in:

• Knowledge on hazardous and non-hazardous wastes:  generation, characteristics and impacts on occupational safety, health and environment.


• Understanding waste management principles including waste minimization or cleaner production


• Practical knowledge on the proper identification, segregation, containerization, temporary storage


• Practical knowledge on the ISO-14001 implementation related to waste handling and treatment or  storage.


• Practical knowledge on the 'PROPER' environmental audit scheme in Indonesia related to waste handling and treatment, both onsite and outside handling


• Transportation, treatment and safe disposal of hazardous and non-hazardous wastes


• Translating the principles and knowledge on waste management into strategic problems solving

 

Course Leader

Ir.Wahyu Priatna Affandi,M.Si has more than 15 years experience of experience in waste management and petroleum business. He has experienced more than 25 years as a practitioner in world-class Petroleum Industries. Graduated from Petroleum Engineering of ITB, directly He started its career as a Production Operations Engineer in on-shore's HUFFCO/VICO-Indonesia in 1982. Finally He left the company after more than 19 years of services (as a Reservoir Engineer, Production Operations Engineer, Tanker Coordinator until a Senior Environmental Coordinator for Kalimantan Operations). He has experienced in wastes handling both hazardous and non-hazardous classification when he was assistant to the Waste Management Chairman, including the impact to stakeholders, sensitive areas, etc

He learned offshore PSC/JOB  in LASMO/Eni-Indonesia then in EPC offshore  Swiber Offshore in HSE related matters. Also he has experienced with national PSC Medco E&P Indonesia, mainly in emergency preparedness implementation, including hazardous related wastes sources. He finished the career in oil and gas companies as an advisor ISO-14001 Audit & Certification Developing Environmental Program, Risk Assessment, Petroleum business Training, Waste Management and Community Development, etc.

He received a Master degree program on The Environmental Management, held by The Padjajaran University of Bandung and The Twente Enschede of Netherlands.

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

 

Documentation

• Quality training material kits will be on registration, additional papers, & handouts assignment by  Our Partner.


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.

 

Dress Code

Casual clothing is recommended. The training atmosphere is informal.

 

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included calculator, T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Convenient training facilities with five star quality


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Local drop and pick up for arrival and departure between airport to hotel.


• Half day city tour at the end of training session following by dinner with entertainment  (optional)


• Exclusive flash disk.

 

Tuition Fee & Registration  Deadline

IDR 8.250.000,-/ Person, Registration deadline a weeks before training held.

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

Field Water Management in Oil & Gas Industry: Safe Handling-Treatment-Disposal

Field Water Management in Oil & Gas Industry

Safe Handling-Treatment-Disposal

Bandung | June 8-11, 2010 | IDR 8.250.000,-/ Person

COURSE DESCRIPTION

A comprehensive course, which deals with produced water treatment and handling within the overall context of oil production operations, it provides a brief review of water in the reservoir and the methods by which water is produced to allow forecasting of rates for equipment sizing considerations. Includes review of Water Chemistry, Sampling Procedures, Scales, Waxes, Corrosion, Bacteria, Inhibitors and Treatments, Surface Equipment for Oil and Water Handling, Separation, Emulsions and Treatment, of Water, Disposal Practices.

 

WHO SHOULD ATTEND

Process Engineers, Laboratory Chemists, Pipeline and Production Engineers, Hydro-Geologists, Environmental advisers, Production Geologists and individuals involved in handling, Treating and Disposal of Produced Water.

 

PRELIMINARY DAILY ACTIVITIES AND TECHNICAL AGENDA

In this practical course participants will learn from and discuss with professional instructor the following subjects:

1. Proper Water Sampling

Sample Containers, Sample Amount, On –Site Analysis, Source of Produced Water

2. Water Treating

Use of Water in Oil Recovery, Required Water Quality, Source of Injection Water, Problems with Injection Water, Typical Treatment Systems, Open VS closed Systems

3. Water Disposal Practices

Introduction, Production Formation, Re-Injection into the Production Formation, Selection of Other, Deep Well Disposal Formations, Disposal Well Completions, Offshore Disposal, Other Disposal Practices

4. Scales

Sources of Scales, Scales Deposition and Identification, Scales Removal, Scale Control, Scale Inhibitors, Predicting Scale Formation, Treating Problems, Squeeze Treatments

5. Treatment and other Tests

Scale Inhibitors, Information Requirements, Types of Inhibitors, Methods of Treatment, Selecting the Inhibitors, System Monitoring

6. Corrosion Fundamentals

Definitions and Forms, Electro-Chemical, Corrosion, Factors in Corrosion, Types of Corrosion Control, Factors Governing Oil-well Corrosion, Choosing the correct Corrosion Inhibitor

7. Bacteria

Introduction, Types of Organisms, Recognition of Bacterial Problems, Detection of Microorganisms, Sampling Procedure, Controlling Microbial Corrosion

8. Wax

What Is It?, Problems associated with wax, Wax Formation and its Removal, Control of Deposition, Screening Test, Points to watch for wax problems

9. Surface Tension

Reservoir Wettability, Capillarity and Repartition, Irreducible Water Saturation, Displacement Pressure, Displacement of Oil, Relationship between Permeability and Fluid Saturations, Reservoir Fluid Properties

10. Surface Equipment – Oil Handling

Flow Lines and Test Separators, Free Water Knock Outs, Heaters and Heater Treaters, Cheme-Electric, Gun-barrels Storage, Tanks and Oil Metering

11. An Overview of Geology and Hydrocarbon accumulation

Introduction, Classification of Rock, Origin and Habitat of Oil, Hydrocarbon Reservoirs, Subsurface Mapping, Reservoir Temperature and Pressure

12. Relative Permeability and Saturations

What is an Emulsion, Formation of an Emulsion, Breaking the Emulsion, Action of chemical Demulsifiers, Selecting the Best Demulsifier, Bottle tests

13. Reservoir Drive Mechanisms

Oil Reservoirs, Solution Gas Reservoir, Gas Cap Expansion Reservoirs, Water Drive Reservoirs, Recovery Efficiencies, Pressure Maintenance and Secondary Recovery Schemes, Water Production

 

ABOUT INSTRUCTOR:

Wahyu Priatna Affandi is experienced Instructor, who succeeds in combining the experience of practitioner with ability adequate academic. He has experience more than 25 years as a practitioner in Petroleum Industries. After he graduated from ITB, he started his career as a Production Operation Engineer in HUFFCO-Indonesia and then he joined VICO Indonesia for more than 19 years (as a Reservoir Engineer, Tanker Coordinator until as a Senior Environmental Coordinator for Kalimantan Operations). He also spent his 3 years career in LASMO Indonesia as Environmental Specialist and ended his career in Oil & Gas Company as an advisor in ISO-14001 Audit & Certification Developing Environmental Program, Risk Assessment, Training, Waste Management and Community Development, in ENI Indonesia.

 

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

 

Documentation & Dress Code

• Quality training material kits will be on registration, additional papers, & handouts assignment by TIM.


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

 

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included calculator, T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Convenient training facilities with five star quality


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Half day city tour at the end of training session following by dinner with entertainment (Optional)


• Exclusive flash disk.

 

Tuition Fee & Registration  Deadline

• IDR 8.250.000,-/ Person


• Registration deadline a weeks before training held.

 

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

 

Certification Program of Oil Spills Control Based on International Maritime Organization (IMO) Level I

Certification Program of Oil Spills Control Based on International Maritime Organization (IMO) Level I

Ibis Slipi Hotel, Jakarta | Jun 21-24, 2010 | Rp. 7.750.000,-

 

COURSE AIM

Improving the skills of field supervisory personnel responsible for undertaking on-site clean up operations and provide them with a complete overview of the various techniques available for recovering oil spilled at sea and cleaning of polluted shorelines.

WHAT YOU WILL LEARN

• To provide participant with theoretical and practical knowledge and understanding on how to control and handle the oil spill.


• To improve skill and abilities of company's supervisor or worker in handling oil spill and preventing accidental losses caused by mishandling acts.


• To provide participants with abilities to asses plant facilities, set oil spill contingency plan, select the right oil spill equipments and mange the oil spill and hazardous material in the even and incident occurs


• To provide participants with abilities to test all oil spill equipments (protection and handling that are available in company' field in what ever condition utilization.

COURSE OUTLINE

1. Introduction

• Back ground


• National regulation


• MARPOL


• OPRC

2. Behavior of oil in water effect

• Persistence & non-persistence oil


• Properties of oil


• Oil spilled process


• Effect of oil spilled


• Oil sampling

3. Type & function oil spill equipment

• Oil boom


• Oil skimmer


• Oil dispersant pump sprayer set


• Dispersant chemical


• Oil containment log


• Oil sorbet

4. Emergency procedures

• Oil spill Organization


• Alarm & response


• Mobilization & control strategy


• Reporting of spill

5. Containment & recovery systems

• Mechanical recovery


• Physical recovery


• The others

6. Dispersant

• Type at dispersant


• Application & calculation


• Toxic effects

7. Shore line clean up & protection technique

• Fore casting slick movement


• Maneuvering at husky boat


• Type of maneuvering

8. Waste management

• Transfer of oil spill


• Storage & disposal

9. Care & maintenance of oil spill equipment

10. Oil spill checklist Hazards to personal safety

11. Hazard to Personal & Safety

12. Off shore & shoreline practical exercise oil spill

 

Instructor
Ir. Suhendar Wijaya, SE, MM & team
Ir. Suhendar Wijaya, SE, MM is a practitioner who has various experiences in safety field for about 22 years. Graduated from general education, he also graduated from special education such as basic & Advance fire fighting from Yokosuko in Japan, basic & advance safety, Liquefied Gas carrier Safety, Petroleum Tanker safety and Tanker operation, Oil and Gas Tanker in Osaka Japan, Marine Pollution in Edinburgh. International Health & safety management in London, Shipping Economic Engineering and many others.

 

Schedule
Jun 21-24, 2010
4 days

Venue
Ibis Slipi Hotel, Jakarta

Tuition Fee
Rp. 7.750.000,-   per participant, excluding accommodation & tax.

 

CHEMICAL SAFETY MANAGEMENT

CHEMICAL SAFETY MANAGEMENT

Bandung | 5-8 October 2009 | USD 710,-/ Person

Background

Some chemicals used at work are clearly perceived as being dangerous eg. Concentrated sulphuric acid; with other substances, however, the danger may not be so well appreciated.

Hazards may be biological, chemical or physical and include fire and explosion. It is important to think about the way in which materials are used and the way which anyone would be at risk from their (mis)use. Lack of knowledge and/ or in correct decisions could lead to immediate injury(acute) or long-term illness (chronic injury).

 

Training Benefits:

This training provides an understanding of hazardous substances, starting from its classification, hazards, to chronic effect to human body. Furthermore, hazardous substances management is also explained, such as communication, disposal, emergency response and identification before accident due hazardous substances happens by risk management activities

 

Objectives:

At the end of this presentation you will be better able to:

1. Explain the hazardous substances definition and classification.


2. Identify hazards due to hazardous substances on human


3. Mention some hazards substances labeling or tagging standards


4. Read label and MSDS (Material Safety Data Sheet).


5. Show hazardous substances waste disposal process.


6. Explain hazardous substances management and technique.


7. Select the protection media based on the use of OSH.


8. Assess the risk due hazardous substances


9. Select the technique  and the control of dangerous chemical substances

 

Who Should Attend?

• Manager K3/ staff K3


• Inspector LK3


• HSE Manager/ Engineer/ Supervisor


• Plant Manager


• Maintenance Manager/ Engineer


• Process facility manager/ Engineer


• Field manager/ engineer


• The other person who interested in

 

Outline Course

1. Rule and Regulation of dangerous chemical substances


2. Hazard Classifications


3. Physical and health effects of the hazardous chemicals.


4. Control strategies


5. Labels


6. MSDS content


7. The written hazard          communication program.


8. Assessment of risk in workplace environment.


9. Controlled Products in storage and use- Characteristics and Precautions.


10. Handling container of chemicals


11. Disposal of ( hazardous) chemical waste


12. Safety signs : packaging and vehicle transport signs


13. Select fire protection media based on using materials


14. Safety emergency procedures to follow if the employee is exposed to these chemicals.


15. Chemical safety inspection

 

Training Method

The training is provided in the form of lecture, discussion, and case studies, problem solving, report and presentation.

 

Course Leader

Bambang Pamudji, Bsc. SE.

Bambang Pamudji, Former Senior Health and Safety staff of PT. Pupuk Sriwidjaja (Urea Fertilizer Manufacturer) Palembang .Born in Pasuruan East Java, 14 March 1950. He was B.Sc in Public Health from APK Surabaya 1971 and graduate from Economic Management Sriwidjaja University 1996. Having certificates in Health, Safety, and Environment from Depnakertrans/ Institutions and Universities in Indonesia, institutions and Universities in UK, and National Safety Council. Experienced in setting up Health and Safety Management System documentation and its application. Experienced internal lead auditor SMK3 in PT. Pupuk Sriwidjaja, and External lead auditor SMK3 for Indonesian Association Fertilizer Producer. Guess speaker and facilitator in various National Health and Safety seminar or courses.

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

 

Documentation & Dress Code

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner.


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

 

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Exclusive flash disk.

**) Optional

 

Tuition Fee & Registration  Deadline

USD 710,-/ Person, Registration deadline a weeks before training held.

 

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)