Distributed Control System -YOGYAKARTA

Distributed Control System -YOGYAKARTA

Hotel Grage Ramayana - Yogyakarta| Yogyakarta, 11– 13 Mei 2011| IDR 4.000.000,-
Hotel Grage Ramayana - Yogyakarta| Yogyakarta, 22–24 Juni 2011| IDR 4.000.000,-

 

TUJUAN

Peserta diharapkan dapat memperoleh pengetahuan yang menyeluruh mengenai cara perhitungan suhu, tekanan dan humidity serta tehnik pengendaliannya.

 

MATERI PELATIHAN

1. Introduction to distributed computing, overview of SCADA system.


2. Components, architectures, operation of DCS and its hardware (field devices, remote terminal units)


3. Controller structures.


4. Sequential control and batch control.


5. Control strategy and configuration.


6. Alarms & trending, programmable logic controllers.


7. Data communications and communications network.


8. Device level communication protocol.


9. Design of MMI.


10. System security and implementation.

 

PESERTA

• Instrument Engineer


• Teknisi, Supervisor dan Operator dibidang instrumentasi, desain, control dan automation technology.


• Mereka yang dalam tugasnya berhubungan atau terkait dengan materi.

 

 

METHOD

Pemaparan konsep, diskusi interaktif, presentasi, dan studi kasus.

 

INSTRUKTUR

Tugino, ST MT

 

WAKTU

• Yogyakarta, 11–13 Mei 2011


• Yogyakarta,22– 24 Juni 2011

 

TEMPAT

Hotel Grage Ramayana - Yogyakarta

 

INVESTASI

• IDR 4.000.000 – (non residential )


• (termasuk picking-up service dari Bandara/Stasiun KA ke hotel, training modul, training kit, 2x coffee break, 1x lunch, souvenir, dan sertifikat)

 

DISTRIBUTED CONTROL SYSTEM (DCS): PRINCIPLES, MAINTENANCE, OPERATION, PROGRAMMING AND TROUBLESHOOTING

DISTRIBUTED CONTROL SYSTEM (DCS):  PRINCIPLES, MAINTENANCE, OPERATION, PROGRAMMING AND TROUBLESHOOTING

Hotel Grand Seriti Boutique Bandung | 21 – 25 February 2011 | Rp 7.450.000/person

TRAINING OBJECTIVE

After completing this course, participants will be able to understand the principles of maintenance and troubleshooting of DCS hardware and software, diagnose DCS component status, and also manage and respond to process interface including Operation and Monitoring. Tobe able to program, to develop monitoring interface system. Engineering programming including Function Block and Human Machine Interface ,   access operator interface display, to manipulate various control modules, operate system trending, manage and respond to process alarm/event, monitor process performance, view real-time and historical trend data, diagnose DCS component status, etc .

TRAINING MATERIAL OUTLINE

1. DCS Introduction


2. DCS Hardware Component and architecture


3. Hardware Installations and Design


4. Hardware Commissioning


5. Software Feature Exploring


6. Hardware General Problem and Troubleshooting


7. DCS Diagnostic


8. Function Block Programming and I/O Addressing system and wiring


9. DCS Programming


10. PID Regulatory Control Programming


11. PID Tuning


12. Human Machine Interface(HMI System)


13. Alarm Management system


14. Process and Event Historical


15. DCS Security

INSTRUCTOR

Ir. Mairodi,MT., Ir. MH Sapto Widodo,M.Sc., Ir. Hadi,MT.

Ir.Mairodi, MT., lulusan dari Physics Engineering(Bachelor) Institut Teknologi Bandung dan Program Instrumentasi dan Kontrol(Master) Institut Teknologi Bandung. Telah berpengalaman memberikan pelatihan di bidang instrumentasi kontrol seperti PLC, DCS, HMI, SCADA dan Industrial Process Control. Pernah memberikan pelatihan untuk perusahaan Migas dan pertambangan serta manufaktur seperti PT.Bayer Urethanes Indonesia, PT Pupuk Kaltim, PT. Geodipa unit Dieng, PT. Krakatau Steel, PT. Medco LPG, PT. Arun LNG, PT. Star Energy, PT. Medco Energy Tanjung Jati, PT. Kaltim Pasifik Amoniak(KPA), PT.ConocoPhillips Indonesia, PT. Babcock & Wilcock, PT.Petrokimia Gresik, Langsa FPSO PTE LTD, PT.Alstom Transport, PT.Unilever Indonesia, PT. Siemen, PT. Pupuk Iskandar Muda, BP Indonesia, PT. TJB Power Services, PT. Indonesia Power UPB Suralaya, CNOOC, TOTAL, PGN, PT. IPMOMI, PT. Rekayasa Engineering, PT. HM Sampoerna, Siemens Indonesia, Chevron Indonesia, PT. Medco, PT. PLN, PT. Elsicom Engineering, PT. Freeport McMoran Indonesia, Plaza Senayan, PT. KPC, INCO, VICO, PT. Ivomas Salim Pratama, dll.

VENUE

Hotel Grand Seriti Boutique Bandung

 

TRAINING DURATION

5 days

 

TRAINING TIME

21 – 25 February 2011

 

INVESTATION PRICE/PERSON

1. Rp 7.450.000/person (full fare)  or


2. Rp 7.200.000/person (early bird, payment before 14 Feb 2011) or


3. Rp 6.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS

1. Training Module


2. Training CD contains training material


3. For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by provider team / instructor


4. Certificate


5. Stationeries: NoteBook and Ballpoint


6. Jacket or waistcoat or T-Shirt


7. Bag or backpackers


8. Training Photo


9. Training room with full AC facilities and multimedia


10. Once lunch and twice coffeebreak every day of training


11. Qualified  instructor


12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

RECOMMENDATION FOR PARTICIPANTS

• For practice session: each participant is recommended to bring notebook/laptop for softwares installation and practice session

DCS (DISTRIBUTED CONTROL SYSTEM) FOR OPERATOR

DCS (DISTRIBUTED CONTROL SYSTEM) FOR OPERATOR

Hotel Golden Flower, Bandung | 8 – 11 December 2010 | Rp 6.950.000/person

INTRODUCTION :

DCS is controller utility used  to control process in plant floor. All of process variables can be monitored and visualized throught monitor and can be supervisory control to process throught this Human Interface system by operator. For being familiarized and skilled in this field of work for operators, they should be trained how to operate this system and how to make modification or develop using appropriate software and to operate developed system. This training is designed for operator to improve their capability around their work in DCS operating system.

TRAINING OBJECTIVE:

After completion of this training, participants will be able to understand the principles of operation of DCS hardware and software system, access operator interface display, to manipulate various control modules, operate system trending, manage and respond to process alarm/event, monitor process performance, view real-time and historical trending data, diagnose DCS component status, operate regulatory control module and simulating process, etc .

 

TRAINING MATERIAL OUTLINE :

1. Introduction to Industrial Process Control system


2. Introduction to Distributed Control System


3. Introduction to Distributed Control System for Operator


4. Operator Interface Feature


5. Programming design, development and simulation


6. Human Machine Interface(HMI)


7. Discrete Module Operation


8. Analog Module Operation


9. Event Journal and Historical


10. Trending


11. Regulatory Control Concept and Operation


12. Cascade Control Concept and Operation


13. Override Control Concept and Operation


14. Sequential Control Operation


15. Alarm Management and report


16. Comprehensive Practice


17. Discussion

 

TRAINING INSTRUCTOR

Dr. Ir. Edi Leksono, M.Eng.  and Team or  Ir.Priyo Syamsul,MT.

DR. Ir. Edi Leksono, M.Eng. is alumnus from Physics Engineering Bandung Institute of Technology, ITB (Bachelor), Control Engineering Tokyo Institute of Technology Japan(Master), and Electrical engineering Keio University Japan. Now Dr. Edi Leksono is a senior professor at Engineering Physics ITB. He have been interacting with industry for more than 25 years for training, consultancy and project implementation in field of SCADA, PLC, DCS, Instrumentation and Process Control and also energy saving. He have taught most of companies in Indonesia for many topics related to his competencies and he has implemented real project in field for many companies in Indonesia. In his expertise in ITB, he have dedicated much scientific work, such as writing or translating text book, being researcher and publish to journal and being speaker in national and international conference.

Ir. Priyo Syamsul Nugraha, MT. is alumnus from Bandung Institute of Technology (ITB), at Physics Engineering department (Bachelor) and Instrumentation and Control Program (Master program). His expertise is on instrumentation and control and metrology. Many training events have been delivered by Ir. Priyo Syamsul for  many companies in Indonesia and some project implementation have been finished by him. Some training topics and projects that Ir. Priyo Syamsul deliver are  Training of Process Control Impelementation in DCS, Training of Impelementation Process Control in DCS for Maintenace Technician, Training of Basic Technique Processing for Instrument Technician in implementation of DCS, Training of DCS Maintenance System, training “Advanced Process Control”, Project Development DCS Configuration for PLN Plan site Singkarak, Project Development of Exaquantum in DCS process Configuration, etc.  Ir. Priyo Syamsul has researched and published to paper/journal that related to control and DCS  like : Planning of System Control Fuzzy Logic for Black Tea Mini-plant Fermentation Process, Greendhool Temperature Characteristic Modelling for Black Tea Fermentation Process Using Neural Network Based Identification Technique, Implementation Model Predictive Control (MPC)  in DCS (Distributed Control Systems) to Control Reactor-Separator Plant, Research Strategy of Implementation Model Predictive Control in Distributed Control System(DCS) : Case Study Controlling Plant Shell Heavy Oil Fractionator, Strategy of Implementation Model Predictive Control in Distributed Control System (DCS), etc.

 

VENUE :

Hotel Golden Flower Bandung

TRAINING DURATION :

4 days

TRAINING TIME  :

8 – 11 December 2010

 

INVESTATION PRICE/PERSON :
1.    Rp 6.950.000/person (full fare)  or
2.    Rp 6.750.000/person (early bird, payment before 27 September 2010) or
3.    Rp 6.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD contains training material


3. For practice session : DCS software is supplied and installed to participants’ laptop/notebook by instructor


4. Certificate


5. Stationeries: NoteBook and Ballpoint


6. Jacket or waistcoat or T-Shirt


7. Bag or backpackers


8. Training Photo


9. Training room with full AC facilities and multimedia


10. Once lunch and twice coffeebreak every day of training


11. Qualified instructor


12. Transportation for participants from hotel of participants to/from hotel of training(if minimal number of participants from one company is 4 persons)

 

RECOMMENDATION FOR PARTICIPANTS:

For practice session: each participant is recommended to bring notebook/laptop for softwares installation and practice session

 

DISTRIBUTED CONTROL SYSTEM - Yogyakarta

DISTRIBUTED CONTROL SYSTEM

Wisma MM UGM,  Yogyakarta | 2 – 5 November 2010 | 08.00 – 16.00 WIB | Rp. 4.000.000,-

DESKRIPSI

This course will cover the practical applications of distributed control systems. Included is the relationship between programmable logic controllers and the DCS. Further included is the importance of Human Computer Interfaces (HMI) and advanced control strategies, which would not be possible without the application of a computer. This course is non-specific but will include a number of manufacturers DCS systems, such as Honeywell TDC rage. Each delegate will receive a comprehensive course manual. The concept of field buses is introduced with some study of Foundation of assets management as a tool for proactive maintenance systems.

 

PESERTA

This course is intended for engineers and technicians requiring knowledge of automation and distributed control

 

METODE

Presentation, Discussion, Case Study, Evaluation

 

MATERI

1. Computer Interfacing


2. Basic DCS Controller Configuration


3. Uninterrupted Automatic Control


4. Advanced DCS Systems


5. Advanced Control Strategies


6. Box Level Control


7. Sequence Programs Linked to Control from Data Highway Box Level


8. Practical Examples of Level 2/3 Control


9. Maintenance Considerations


10. Maintenance Requirements of System and System Elements


11. Procedure for Checking Control Loop Calibration


12. IN-built Diagnostics and Maintenance Diagnostic Routines


13. Requirements for Installation of UPS System

 

INSTRUKTUR

Ir. Teguh Santoso

Prakstisi di bidang pembangkitan dan telah berpengalaman dalam berbagai kegiatan training, inspeksi dan konsultan di berbagai lembaga dan perusahaan seperti PT. Angkasa Pura II, PLTA Mrica, PLTA Jelog, PLTA Garung, PT. Perhutani, PLTA Kedung Bandara Sokerno-Hatta, PTPN XI, PTPN X, PT Fokus Indo Lighting Jakarta, PT. Mirambi Energi (bersama PT. Jasa-Produksi, PLN) PLTD Mateko Bulukumba, Sulawesi Selatan.

Beliau juga aktif mengajar di berbagai perguruan tinggi antara lain di STMIK AKAKOM, IST AKPRIND, AAN, AAU untuk mata kuliah: Teknik Digital, Sistem Mikroprosesor dan mengajar di Jurusan Teknik Elekro Fakultas Teknik, Universitas Gadjah Mada

 

WAKTU & TEMPAT

2 – 5 November 2010
08.00 – 16.00 WIB
Wisma MM UGM Yogyakarta

 

INVESTASI

Biaya kursus (Non Residential) :

Rp. 4.000.000,- per orang

 

FASILITAS

Certificate, Training Kit, Module / Handout, Lunch, Coffee Break, Souvenir