WELDER CERTIFICATION (SMAW SYSTEM) - Sertifikasi Depnakertrans (PASTI JALAN)

WELDER CERTIFICATION (SMAW  SYSTEM) - Sertifikasi Depnakertrans

Balai Latihan Kerja, Bekasi | 28 Maret s.d 02 April 2011 | 08.00 – 16.00 | Rp 10.000.000,-

 

Subject :

Knowledge and Practical Training for All  Participant

 

Knowledge Requirement

1. K – 3 Pengelasan


2. Pemeliharaan Peralatan Las Busur Listrik


3. Teknik Dasar Pengelasan


4. Klasifikasi Proses Pengelasan


5. Pengetahuan Bahan Teknik


6. Symbol Las


7. Cacat Las dan Cara Pencegahannya


8. Pengujian dan Pemeriksaan Hasil Las


9. WPS dan PQR Implementation in practical weldingshop


10. Metallurgy Las


11. Posisi Pengelasan (Welding Position)


12. Type Pengelasan (Fillet Weld and Groove Weld)


13. Persiapan Sambungan Las

 

Practical Requirement  Placement Test & Certification

• Fillet Welding  ( F  )         ( 1F  , 2F,   3F,   4F   ) lb52


• Type of joint           :    T  - Joint  ( thickness 8 mm ) - plate

• Plate Welding   ( G )        ( 1 G , 2G,   3G,   4G  )


• Type of joint           : Butt-Joint   V – Groove ( thickness 12 mm )- plate

 

Date & Venue
Date        :28 Maret s.d 02 April 2011
Time       : 08.00 – 16.00
Venue    : Balai Latihan Kerja, Bekasi

Tuitions Fee

• The tuition fee for placement test & certification  (issued by Depnakertrans)  is Rp 10.000.000,-  (Ten Million Rupiahs) nett.


• The Fee  include Fee Instructor, Consumable goods for practice, Lunch, 2X coffee break, Module, Hand out  and Certificate (issued by Depnakertrans).

 

Remark:

Certificate that issued by Depnakertrans  based on skill test result

 

WELDING METALLURGY

WELDING METALLURGY

Hotel Golden Flower Bandung |11 - 15 April 2011 | Rp 7.450.000/person

INTRODUCTION:

This training will explore the metallurgical aspect of welding for industrial materials such as carbon steel, stainless steel, nickel alloys, titanium alloys, and copper alloys. The training will emphasize the relationship between welding quality and metallurgical transformation that occur during melting and solidification of metals. Training participants will be directed to understand these phenomenon and welding defects that arise from the transformation. Failure of weld after welding or during weld repair will be discussed in relation to the material microstructure. Welding philosophy of dissimilar metals and cladded materials will also be introduced by refering to the latest welding technology. At the end of the course, some real case studies about weld failure will be presented, and participants will also be introduced to the laboratory equipments for analysis.

TRAINING MATERIAL OUTLINE:

1. Introduction


2. Physics of welding


3. Welding metallurgy :
   
   
   
   • a.    Phase diagrams, phase transformation, and Preheat + Postheat
   
   
   • b.    Weld Metal
   
   
   • c.    Heat affected zone
   
   
   • d.    Distortion and residual stress
   
   
   • e.    Weld defects
   
   
   
   


4. Weld ability of metals


5. Welding metallurgy of :
   
   
   
   • a.    Carbon steel
   
   
   • b.    Stainless steel
   
   
   • c.    Nickel alloys
   
   
   • d.    Copper alloys
   
   
   • e.    Titanium alloys
   
   
   
   


6. Welding of dissimilar metals and cladded material


7. Case study


8. Laboratory visit(optional)

 

INSTRUCTOR :

Ir. Sutrimo (Dosen Poltek ITB/Polban)

 

VENUE :

Hotel Golden Flower Bandung

 

TRAINING DURATION :

5 days

TRAINING TIME  :

11 - 15 April 2011

 

INVESTATION PRICE/PERSON :

1. Rp 7.450.000/person (full fare)  or


2. Rp 7.250.000/person (early bird, payment 1 week before training) or


3. Rp 6.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Flash Disk contains training material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. T-Shirt


6. Backpack


7. Training Photo


8. Training room with full AC facilities and multimedia


9. Lunch and twice coffeebreak everyday of training


10. Qualified instructor


11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Welding Metallurgy

Welding Metallurgy

Holiday Inn Hotel, Bandung | July 12-16, 2010 | Rp. 8.250.000,-

INTRODUCTION & OBJECTIVES

This training will explore the metallurgical aspect of welding for industrial materials such as carbon steel, stainless steel, nickel alloys, titanium alloys, and copper alloys. The training will emphasize the relationship between welding quality and metallurgical transformation that occur during melting and solidification of metals. Training participants will be directed to understand these phenomenon and welding defects that arise from the transformation. Failure of weld after welding or during weld repair will be discussed in relation to the material microstructure. Welding philosophy of dissimilar metals and caddied materials will also be introduced by referring to the latest welding technology. At the end of the course, some real case studies about weld failure will be presented, and participants will also be introduced to the laboratory equipments for analysis.

FEATURING THE FOLLOWING COURSE OUTLINE

1. Introduction


2. Physics of welding


3. Welding metallurgy:
   
   
   
   • Phase diagrams, phase transformation, and Preheat + Postheat
   
   
   • Weld Metal
   
   
   • Heat affected zone
   
   
   • Distortion and residual stress
   
   
   • Weld defects
   
   
   
   


4. Weld ability of metals


5. Welding metallurgy of:
   
   
   
   • Carbon steel
   
   
   • Stainless steel
   
   
   • Nickel alloys
   
   
   • Copper alloys
   
   
   • Titanium alloys
   
   
   
   


6. Welding of dissimilar metals and cladded material


7. Case study


8. Laboratory visit

WHO SHOULD ATTEND

• Inspection personnel's who conduct or supervise the regular inspection


• Maintenance personnel's who responsible for the continuous running of the plant


• Everybody who wish to broaden their knowledge on this course subject

 

Instructor

DR. Ir. Husaini Ardy is a lecturer at Mechanical Engineering ITB. He received his bachelor degree in 1984 and Master degree in 1987 degree from Mechanical Engineering of ITB. He continued to study in the field of Material Engineering at Illinois Institute of Technology, Chicago, USA, in 1994 he completed his Ph.D. degree. He has been involving in material selections and mechanical component failure analysis for the industries in Indonesia.

DR. Husaini regularly conduct seminars for the industries for both public and in-house in Indonesia. In a team, he has successfully handled the following projects:

• Failure analysis some engineering components at oil and gas companies (TOTALFINA-ELF, BP-ARCO, VICO, CPI, CONOCO, KONDUR, ARUN NGL, EXXONMOBIL); fertilizer companies (PUSRI, KUJANG, PKT); petrochemical companies (PETROGRES); automotive and transportation companies (PTKAI, FEDERAL, GARUDA Airline, Merpati Nusantara Airline).


• Material selections for line pipe, flow lines, and down hole tubing in some oil and gas companies.


• Materials verification, testing and assessment in Mobil Oil and ARCO.


• Materials failure analysis and assessment for CONOCO.


• Corrosion mitigation for gas industries.

 

Schedule
July 12-16, 2010
5 days

Venue
Holiday Inn Hotel, Bandung

Tuition Fee
Rp. 8.250.000,- per participant, excluding accommodation & tax.