AC/DC ELECTRICAL MOTOR CONTROL

AC/DC ELECTRICAL MOTOR CONTROL
Hotel Grand Seriti Boutique Bandung |18 – 21 July 2011| Rp  6.950.000/person
Hotel Grand Seriti Boutique Bandung | 12 – 15 December 2011| Rp  6.950.000/person

INTRODUCTION :

This training is designed to give knowledge and skill on operation, maintenance, protection, control and troubleshooting  of electric motor that many used in industries. And also will be explained why is control, protection and maintenance of electric motor needed in production process that used electric motor.  Type selection, performance, appropriate control for electric motor that expected to be able to turn a certain load will be explained and discussed more here.

 

TRAINING MATERIAL OUTLINE :

1. Introduction To Electric Motors
   
   
   
   1. Fundamental Concepts,
   
   
   2. DC Motor,
   
   
   3. AC Motor
   
   
   
   


2. Types Of Electric Motors
   
   
   
   1. Induction Motors,
   
   
   2. Synchronized Motor,
   
   
   3. Shunt and Series Reinforcement,
   
   
   4. Compound Reinforcement
   
   
   
   


3. Motor Rating
   
   
   
   1. Specification,
   
   
   2. Isolation,
   
   
   3. Types of Operations,
   
   
   4. Motor Protection-Classification
   
   
   
   


4. Electric Motor Characteristics
   
   
   
   1. DC Motor Characteristics,
   
   
   2. Torsion – Current,
   
   
   3. Speed – Current.
   
   
   4. Speed – Torsion,
   
   
   5. AC Motor Characteristics,
   
   
   6. Torsion – Speed
   
   
   
   


5. Motor Starting
   
   
   
   1. Direct On Line Starting,
   
   
   2. Star/Delta Starting,
   
   
   3. Rotor Resistance Starting,
   
   
   4. Soft Starting
   
   
   
   


6. Electric Motor Control
   
   
   
   1. Methods of speed control,
   
   
   2. Control of the speed of DC motors,
   
   
   3. Control of the speed of induction motors
   
   
   
   


7. Assemblage Techniques
   
   
   
   1. Control and Power Circuits,
   
   
   2. Capacity Limitation and Thermal Protection
   
   
   
   


8. Failure Analysis And Repair


9. How To Select Appropriate Motors
   
   
   
   1. Electrical and Mechanical Issues,
   
   
   2. Selection Methods and Know-How
   
   
   
   

10. Protection of Electric Motor During Starting, Running and Braking

1. Limit of protection,


2. Overload protection,


3. Short circuit protection,


4. Interlocking protection,


5. Under voltage protection,


6. Phase failure protection,


7. Reverse phase protection,


8. Incomplete sequence protection

11. Maintenance of Electric Motor Control

1. General procedure,


2. Maintenance of motor starter,


3. Maintenance of relay,


4. Maintenance of pilot devices,


5. Maintenance of braker and clutches

 

WHO SHOULD ATTEND THIS TRAINING

Operator, technician, engineer , and everyone who want to know or to deepen the technique of operation, maintenance and control of AC/DC electric motor

 

INSTRUCTOR :

Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN)  and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for  many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences  and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

VENUE :

Hotel Grand Seriti Boutique Bandung

 

TRAINING DURATION :

4 days

 

TRAINING TIME :
18 – 21 July 2011
12 – 15 December 2011

 

INVESTATION PRICE/ PERSON :

1. Rp 6.950.000/person (full fare)  or


2. Rp 6.750.000/person (early bird, payment 1 Week before training) or


3. Rp 6.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS :

1. Training Module


2. Training CD contains training material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or waistcoat or T-Shirt


6. Bag or backpackers


7. Training Photo


8. Training room with full AC facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified instructor


11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

 

AC AND REFRIGERATION: SAFETY AND CONTROL SYSTEMS - Yogyakarta

AC AND REFRIGERATION:  SAFETY AND  CONTROL  SYSTEMS

Wisma MM UGM, Yogyakarta | 20 – 23 Desember 2010 | 08.00 – 16.00 WIB | Rp. 4.000.000,-

DESKRIPSI

Memberikan pengetahuan tentang dasar peralatan kontrol dan keamanan pada mesin-mesin pendingin atau mesin refrigerasi. Berbagai macam peralatan dan sistem keamanan dijelaskan secara komprehensif mulai dari pemilihan, prinsip kerja, perawatan, dan penanganan masalah dalam proses pendinginan.

PESERTA :

Teknisi, Engineer, Supervisor yang bekerja pada bidang maintenance di perusahaan.

MATERI

1. Basic Concept of AC & DC.


2. Instalasi dan trouble shooting


3. Perawatan


4. Intro To Load Estimating


5. Load Estimating : Cooling and Heating


6. Load Estimating : System Design


7. Mechanical Refrigeration : Cycle Descrip.


8. Mechanical Refrigeration Cycle Analysis


9. Ducting Design : Principle & Method


10. Fundamental of Psychrometric


11. Psychrometric : Properties of Air ADV.PROG.


12. Refrigerant Piping System


13. Water Piping & Pump Selection


14. Multi Room Buildings,Load CH.SYS.PROG.


15. Ducting Design : Air Side


16. Ducting Design : Centrifugal Fan


17. Ducting Design : Room Air Distribution


18. Cooling Coil Performance


19. Air Handling Unit : Central SYS.


20. Heat Rejection Equipment & Cooling Tower


21. Control Principles & Method.


22. Test Merancang Sistem Tata Udara


23. Centrifugal REF.Equipment


24. Absorption REF.Equipment


25. Reciprocating REF.Equipment


26. Reciprocating Chiller


27. Large Packaged Equipment

INSTRUKTUR :

• Dr. Samsul Kamal


• Ir. Prajitno, M.T.

Waktu

20 – 23 Desember 2010

08.00 – 16.00 WIB

Tempat

Wisma MM UGM Yogyakarta

Biaya

Rp. 4.000.000,- per orang non residential

Air Conditioning and HVAC Course

Air Conditioning and HVAC Course

Papandayan Hotel, Bandung | March 8-12, 2010 | Rp.8.250.000,-

COURSE OBJECTIVE

This 5 day course is designed to broaden and increase knowledge of all participants on the industrial refrigeration system which includes HVAC system. In detail, the discussion will cover its selection, operation, maintenance and load calculation of air management.

To make this course more comprehensive, there will be an actual practice for all participants in the thermodynamic laboratory ITB.

The instructors will also first talk about the basic theory of the cooling and air conditioning system. Further more, the participant will also learn about refrigeration system, its components, selection guideline, characteristic of each components, operation and maintenance of the industrial refrigeration system.

COURSE OUTLINE

Introduction to Refrigeration Systems and HVAC

Theory of Refrigeration System as a basic to understand the cooling system

• Vapor compression cycle


• Absorption cycle


• Air cycle

Basic Calculation of Air Conditioning System

• Basic concept of humidity, comfortable limit, etc.


• Psychometric diagram


• Load calculation of air conditioning

Refrigeration System Components and Industrial refrigerant. Discussion on type, work principle, characteristic of the following refrigeration components:

• Compressor


• Evaporator


• Condenser


• Expansion valve and components


• Chiller


• Refrigerant

Industrial Refrigeration System for Industrial Application

• Classification of industrial refrigeration system


• Parameter and criteria of selection

Refrigerant

• Type and characteristic


• CFC and Non CFC Refrigerant


• Selection guide of refrigerant

Operation and Maintenance of Refrigeration System and HVAC

• Operation of refrigeration & HVAC system


• Maintenance of refrigeration and HVAC system


• Inspection of refrigeration and HVAC system


• Trouble shooting

Practice of Basic Refrigeration System

Actual practices at thermodynamic laboratory ITB on how to use refrigeration system tools & equipment. The tools and equipment were specially designed for practice purposes.

WHO SHOULD ATTEND

• Engineers (process, design/ electrical, mechanical, petrochemical, maintenance)


• Manager/ Superintendent/ Supervisors of process, production and maintenance


• Everybody who wish to broaden their knowledge on engineering materials

Instructor

DR. Ir. I Made Astina, M.Eng. is currently assistant professor of mechanical Engineering, Faculty of Mechanical and Aerospace Engineering ITB. He graduated from Mechanical Engineering Department ITB in 1992. Prior to his Ph.D. obtainment in Engineering (thermodynamics, school of science for open and environmental systems) from Keio University Tokyo, Japan in 2004, he received Master of Science in Engineering (mechanical engineering department) from the same university in 1997. His researches concern on thermodynamic, development of new thermal systems, thermodynamic cycles, air conditioning and refrigeration systems. His papers were published in international and national journals, besides he also presents his papers in international and national seminars. Besides teaching at the university, he also has experiences to give short courses for industrial practical engineers and publics and to collaborate practical consultant works.

Dr. Ir. Nathanael P. Tandian completed his undergraduate study in the Mechanical Engineering Department ITB in 1983, then he joined the Mechanical Engineering Department of ITB as a faculty member (1984) and later the Thermodynamics Laboratory as a research staff (1985). He continued his graduate program at the University of Minnesota USA and got his MSME (1991). In 1994 he received his Ph.D. in the area of Thermodynamics and Head Transfer. He has been being intensively involved in many researches, technical training and seminars of refrigeration and thermal system. He has also been involved in several collaborative projects with oil and gas industries.

Schedule
March 8-12, 2010
5 days

Venue
Papandayan Hotel, Bandung

Tuition Fee
Rp.8.250.000,-per  participant, excluding accommodation & tax.