MANAJEMEN DAN AUDIT EFISIENSI ENERGI LISTRIK

MANAJEMEN DAN AUDIT EFISIENSI  ENERGI LISTRIK (Two Days Training)

Hotel Ibis,Jogjakarta| 18 – 19  Mei  2011|Rp. 3.000.000 per Peserta
Hotel Ibis,Jogjakarta| 15  Juni  – 16 Juni 2011 |Rp. 3.000.000 per Peserta
Hotel Ibis,Jogjakarta|27 -28 Juni 2011 |Rp. 3.000.000 per Peserta

Deskripsi

Energi listrik merupakan energi yang sangat vital dalam  operasional perusahaan. Hampir semua peralatan dan sumber penerangan  yang digunakan berasal dari energi listrik . Namun dalam pemakaiannya  banyak dikeluhkan adanya ketidak-efisiensian energi listrik ini. Hal ini terbukti dari membengkaknya tagihan listrik yang harus dibayarkan perbulannya.  Terlebih apabila ini terjadi dilingkungan kantor atau perusahaan maka akan mengakibatkan anggaran biaya yang cukup besar.

Tingkat efisiensi pemakaian listrik di pengaruhi oleh daya listrik yang terpasang, aktivitas yang dilakukan,jenis peralatan yang terpasang dan rata-rata pemakaian listrik perhari/per bulan.Untuk mengefisiensikan pemakaian listrik, maka perlu dilakukan manajemen audit energi listrik dimana dengan audit tersebut akan didapatkan potret pengunaan energi listrik pada suatu bangunan, mengetahui kondisi peralatan yang terpasang dan mengetahui peluang untuk penghematan energi. Keberhasilan program efisiensi pemakain energi listrik, selain dipengaruhi oleh faktor teknis juga sangat bergantung pada komitmen manajemen puncak dan komitmen seluruh karyawan dalam gerakan efisiensi.

 

Tujuan dan Manfaat

1. Peserta pelatihan memahami prinsip- prinsip penerapan penghematan energi di perusahaan masing-masing.


2. Peserta pelatihan mampu mengenali potensi-potensi penghematan energi di perusahaan masing-masing.


3. Peserta pelatihan mampu membuat langkah – langkah program penghematan energi

 

Materi

1. Karakteristik penggunaan energi di bangunan gedung.


2. Strategi  Penghematan Energi listrik


3. Perencanaan Program Penghematan Energi


4. Audit energy


5. Pembentukan tim penghematan energi  dan Pengkajian sumber penggunaan energi


6. Membangun budaya  gerakan efisiensi pemakaian listrik


7. Studi kasus penerapan program penghematan energi

 

Peserta

Pelatihan ini ditujukan bagi manajer,kepala bagian umum,kepala bagian sarana dan prasarana, dan seluruh staf perusahaan  yang terkait dengan pemakaian energi  listrik

 

Metode

Presentasi, Diskusi , Brainstorming, Case Study,Evaluasi

 

Waktu  Dan Tempat

• 18 – 19  Mei  2011


• 15  Juni  – 16 Juni 2011


• 27 -28 Juni 2011


• Hotel  Ibis,Malioboro, Yogyakarta

Investasi dan Fasilitas

• Rp.3.000.000 (Non Residential)


• Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir


• Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel

 

Instruktur

IR. Suprapto.MT

Memiliki pengalaman luas sebagai praktisi dan  trainer di bidang  Electricity Maintenance.

 

ELECTRICAL POWER SYSTEM ANALYSIS USING ETAP (PASTI JALAN)

ELECTRICAL POWER SYSTEM ANALYSIS USING ETAP


Hotel Golden Flower,  Bandung | 23 –26  Mei  2011| Rp 6.950.000 (Pasti Jalan)
Hotel Golden Flower,  Bandung |  1 – 4 Agustus 2011| Rp 6.950.000

TRAINING OBJECTIVES :

Pelatihan ini bertujuan meningkatkan penbgetahuan dan wawasan mengenai analisa system tenaga. Untuk mensimulasikan hasil Analisa digunakan software Aplikasi ETAP. Pelatihan ditekankan pada analisa pada jaringan tenaga listrik Tegangan menengah hingga tegangan rendah yang meliputi Studi Aliran daya, Analisa Hubung singkat, Analisa Transien dan Harmonisa sehingga setelah mengikuti pelatihan peserta akan dapat :

• Meningkatkan pengetahuan dan wawasan mengenai kondisi operasi Sistem Tenaga


• Melakukan analisa Aliran Daya menggunakan ETAP


• Melakukan Analisa Hubung Singkat menggunakan ETAP


• Melakukan Analisa Motor Starting menggunakan ETAP


• Melakukan Analisa Transient menggunakan ETAP


• Melakukan Studi Harmonisa dan menentukan ukuran Filter

 

TRAINING MATERIAL OUTLINE :

1. Electric power grid representation and characteristic. (System overview, Elements of Electrical Power System, per-unit System)


2. Building One-Line Diagram Using ETAP . (Add Elements, Select & Deselect Elements, Element and Connector Colors, Relocate Elements, Cut, Copy, & Paste, Size, Symbol, & Orientation, Protective Devices, Nodes & Buses, Group & Ungroup, Composite Networks)


3. Load Flow Calculation Methods. (Newton-Raphson, Fast-Decoupled, Gaus-Siedel)


4. Load Flow Study Using ETAP. (Load Flow Toolbar, Load Flow Study Case Editor, Load Flow Display Options, Load Flow Calculation Methods, Load Flow Required Data, Load Flow Output Reports)


5. Fault Calculation Methods. (Impedance Methode, Symetrical Component Methode)


6. Short-Circuit Analysis. (Short-Circuit Toolbar, Short-Circuit Study Case Editor, Short-Circuit Display Options, Short-Circuit Required Data, Short-Circuit Output Reports)


7. Motor Starting Analysis. (Motor Starting Methods, Motor Starting Calculation)


8. Motor Starting Analysis Using ETAP. (Motor Starting Toolbar, Motor Starting Study Case Editor, Info Page, Model Page, Time Event Pages, Add Action by Starting Category, Add Action by Load, Motor Starting Display Options, Motor Starting Calculation Methods, Motor Starting Required Data, Motor Starting Output Reports, Motor Starting Time Slider Toolbar)


9. Transient Stability Anaysis. (Purpose for Performing Transient Stability Study, Power System Stability Definition, Stability Limits)


10. Transient Stability Anaysis Using ETAP. (Transient Stability Toolbar, Transient Stability Study Case Editor, Info Page, Events Page, Dyn Model Page, Transient Stability Plots, Transient Stability Required Data, Transient Stability Output Reports, Transient Stability Time Slider Toolbar)


11. Harmonic Analysis. (Definition, Harmonic Parameters, Harmonic Sources)


12. Harmonic Analysis Using ETAP. (Harmonic Analysis Toolbar, Harmonic Analysis Study Case Editor, Harmonic Analysis Display Options, Harmonic Analysis Calculation Methods, Harmonic Analysis Required Data, Harmonic Analysis Output Reports, Harmonic Analysis Order-Slider, Harmonic Analysis Frequency-Slider)

 

WHO SHOULD ATTEND THIS TRAINING?

Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa system tenaga.

 

TRAINING INSTRUCTOR

Ir. Hasan Surya, MT. and Team

Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN)  and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for  many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences  and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

VENUE :

Hotel Golden Flower Bandung

 

TRAINING DURATION :

4 days

 

TRAINING TIME :

1. 23 –26  Mei  2011


2. 1 – 4 Agustus 2011

 

INVESTATION PRICE/ PERSON :

1. Rp 6.950.000/peserta (bayar penuh)  atau


2. Rp 6.750.000/peserta (early bird, yang membayar 1 minggu sebelum training)  atau


3. Rp 6.500.000/peserta (untuk peserta bergroup yang terdiri dari 3 orang peserta atau lebih dari 1 perusahaan yang sama)

 

FACILITIES FOR PARTICIPANTS :

1. Training Module


2. Training CD contains training material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or waistcoat or T-Shirt


6. Bag or backpackers


7. Training Photo


8. Training room with full AC facilities and multimedia


9. Lunch and twice coffeebreak everyday of training


10. Qualified instructor


11. Practice session


12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

RECOMMENDATION TO PARTICIPANTS :

Participants are recommended to bring laptop for practice sessions

 

 

Pelatihan & Sertifikasi K3 Teknisi Listrik - Sertifikasi Depnakertrans (PASTI JALAN)

Pelatihan & Sertifikasi K3 Teknisi Listrik

(Ref. Kep Dirjen Pembinaan Hub. Industrial & Pengawasan Ketenagakerjaan No.311/BW/2002)

Hotel Sofyan Betawi, Jakarta dan Politeknik Negeri Bandung |11 s.d 14 April 2011| 08.00 – 17.00 | Rp 5.500.000,- (Pasti Jalan)
Hotel Patra Jasa Cempaka Putih, Jakarta dan Politeknik Negeri Bandung |13s.d 16 Juni 2011| 08.00 – 17.00 | Rp 5.500.000,-
Hotel Patra Jasa Cempaka Putih, Jakarta dan Politeknik Negeri Bandung |19 s.d 22 September 2011| 08.00 – 17.00 | Rp 5.500.000,-
Hotel Patra Jasa Cempaka Putih, Jakarta dan Politeknik Negeri Bandung |07 s.d 10 November  2011| 08.00 – 17.00 | Rp 5.500.000,-
Hotel Patra Jasa Cempaka Putih, Jakarta dan Politeknik Negeri Bandung |05  s.d 08 Desember  2011| 08.00 – 17.00 | Rp 5.500.000,-

 

Materi  Pelatihan

• Peraturan Perundangan Keselamatan dan Kesehatan Kerja


• Dasar – dasar Keselamatan dan Kesehatan Kerja Listrik


• Dasar – dasar Teknik  Instalasi Listrik


• Identifikasi  Bahaya Listrik


• Sistem  Pengamanan


• Persyaratan  Instalasi  Listrik Ruang Khusus


• Sistem  Proteksi  Bahaya  Petir


• Klasifikasi  Pembebanan


• Pengukuran  Listrik (teorik & praktek)


• Pertolongan  Pertama  Kecelakaan  Listrik


• Evaluasi

Tanggal & Tempat Pelatihan

 

Jam:

08.00 – 17.00

Tanggal & Tempat

Tanggal         :

• 11 s.d 14 April 2011


• 13s.d 16 Juni 2011


• 19 s.d 22 September 2011


• 07 s.d 10 November  2011


• 05  s.d 08 Desember  2011

Jam              :  08.00 – 17.00

Tempat         :  Hotel Sofyan Betawi

Jl. Dr. Sahardjo No. 191, Jakarta Selatan

Politeknik Negeri Bandung (POLBAN) –  Jawa Barat (Praktek)

Instruktur

Para Praktisi dari Depnakertrans RI dan Politeknik Negeri Bandung (Polban)

Biaya  Pelatihan

• Rp 5.500.000,- (Lima Juta Lima Ratus Ribu Rupiah).


• Biaya tersebut sudah termasuk Training kit, Modul, Buku PUIL 2000, Soft copy materi, Kartu Kewenangan dan Sertifikat dari Depnakertrans RI, 2x Coffee break, Lunch, Akomodasi praktek (penginapan (twinshare), dinner & breakfast) selama 1 malam di Bandung,


• Tidak termasuk pajak – pajak.

ELECTRONIC SHUTDOWN AND LOGIC SYSTEM

ELECTRONIC SHUTDOWN AND LOGIC SYSTEM
Hotel Jayakarta, Bandung |12 – 15 September 2011 | Rp 6.950.000/person

 

INTRODUCTION AND GOAL

This training is meant to improve knowledge and horizons on electronic shutdown and logic system. The training will emphasize on PLC use in handling shutdown system.  How to develop logic system on shutdown system will be explained and covered others such as failure and reliability, SIS, BPCS, SDSS, DAS, PLC elaboration on hardware, software and implementation, hazardous area and electrical classification. After training completed, participants are hoped to have comprehension understanding on electronic shutdown and logic system and how these all are implemented.

 

TRAINING MATERIAL OUTLINE

1. Process Safety Standard
   
   
   
   1. Convenes and ILO Recommendation,
   
   
   2. Hazards Analysis Potency,
   
   
   3. Hazard Identification,
   
   
   4. Safety Life Cycle,
   
   
   5. Safety Integrated Level - SIL Matrix,
   
   
   6. Safety Instrumented System – SIS,
   
   
   7. Markov Model,
   
   
   8. Sample Calculation
   
   
   
   


2. Failures & Reliability
   
   
   
   1. Failures,
   
   
   2. MTTR ,
   
   
   3. MTBF,
   
   
   4. Fault Tree Analysis ,
   
   
   5. FMEA
   
   
   
   


3. Emergency Shutdown System
   
   
   
   1. Basic Ideas about SIS,
   
   
   2. BPCS and SIS ,
   
   
   3. Emergency Shutdown Systems,
   
   
   4. Typical architecture
   
   
   
   


4. Selecting Sensor for SIS
   
   
   
   1. Requirements for Sensors used in SIS,
   
   
   2. Sensor Selected Based upon Prior Use,
   
   
   3. Sensor Capabilities and Limitation
   
   
   
   


5. SSDS AND DAS SYSTEMS
   
   
   
   1. Safety Shutdown System Overview,
   
   
   2. Data Acquisition System Overview
   
   
   
   


6. PLC hardware and ladder logic
   
   
   
   1. field device connections,
   
   
   2. wiring/cabling/fusing schemes for various I/O module configurations,
   
   
   3. review of programming terminal use
   
   
   
   


7. Configuration of the data files and ladder logic files in the SSDS


8. SIS in practice
   
   
   
   1. Components of the Safety Loop,
   
   
   2. Types of logic Solvers,
   
   
   3. Safety Relays-Electromechanical,
   
   
   4. Programmable Logic Solvers,
   
   
   5. Safety PLCs & General Purpose PLCs
   
   
   
   


9. Hazardous Area & Electrical Classification
   
   
   
   1. Hazardous Area Classification,
   
   
   2. Electrical Hazard,
   
   
   3. Electrical Grounding and Bonding,
   
   
   4. Lightning Protection
   
   
   
   

 

WHO SHOULD ATTEND

Technician, operator, supervisor who work in production and want to know comprehensively on electronic safety Shutdown System.

 

INSTRUCTOR

Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN)  and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for  many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences  and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

VENUE

Hotel Jayakarta, Bandung

 

TRAINING DURATION

4 days

 

TRAINING TIME

1. 12 – 15 September 2011

 

INVESTATION PRICE/ PERSON

1. Rp 6.950.000/person (full fare)  or


2. Rp 6.750.000/person (early bird, payment 1 week before training) or


3. Rp 6.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module


2. Training CD contains training material


3. For practice session: participant’s laptop will be installed using our software


4. Certificate


5. Stationeries: NoteBook and Ballpoint


6. Jacket or waistcoat


7. Bag or backpackers


8. Training Photo


9. Training room with full AC facilities and multimedia, with one lunch and twice coffee break


10. Qualified instructor


11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

RECOMMENDATION FOR PARTICIPANTS

For practice session: every participant is recommended to bring laptop/notebook for software installation and practice

HEAT TREATMENT MATERIAL

HEAT TREATMENT MATERIAL
Hotel Golden Flower, Bandung |4 – 7 Juli 2011 | Rp 7.250.000/person
Hotel Golden Flower, Bandung |7 – 10 November 2011 | Rp 7.250.000/person

INTRODUCTION AND OBJECTIVE :

Steel (baja) adalah material yang umum digunakan pada komponen-komponen mesin dan struktur. Pemilihan material baja untuk aplikasi di industri merupakan hal yang mendasar dan sangat penting juga untuk memahami struktur dari baja serta bagaimana baja dapat dimodifikasi agar sesuai dengan aplikasi yang dibutuhkan.  Kursus/training ini bertujuan untuk memberikan pemahaman dasar perlakuan panas dan permukaan pada baja. Termasuk terhadap material aluminium dan stainless.

TRAINING MATERIAL OUTLINE/CAKUPAN MATERI TRAINING :

1. Aspek-aspek umum dari heat treatment


2. Mikrostruktur dan sifat mekanik baja


3. Austenit dan transformasinya


4. Klasifikasi dari baja


5. Annealing dan normalizing pada baja


6. Pengerasan pada baja


7. Kekerasan dan kemampuan keras dari baja


8. Tempering pada baja


9. Pengerasan permukaan dan beberapa metodenya


10. Studi kasus dan diskusi

Training instructor

Dr. Eng. Budi Prawara is graduated from Material Engineering (Thermal Spray Coating) University of the Ryukyus Japan for his Doctorate program. He work as researcher at research center of electric power and mechatronics - LIPI (Lembaga Ilmu Pengetahuan Indonesia) and his structural position is as head of Subdivision of mechatronic facilities. His core expertise is material engineering and surface engineering(rekayasa permukaan).  Related to training, Dr. Eng. Budi Prawara has taught  training class on topics related to Thermal Spray Coating, including heat treatment. As researcher he has researched numerous number such as Heat treatment to steel AISI H13 with process of Austempering, Tempering and Martempering, Defect influence at Thermal Spray Coating to Thermal Properties, heat treatment of Thermal Spray Coating with process of Spark Plasma Sintering, Deposition of Ceramic Matrix Composite Coating with HVOF Thermal Spray Coating for worn out and impact resistance application, Heat Treatment of Ni-Base Self Flux Alloy (SFA) Coatings by Spark Plasma Sintering, Station Charging System for electric Motor, designing of Cooling System at Dies High Pressure Die Casting/HPDC, designing of Thermal Spray Coating with High Velocity Oxygen Fuel (HVOF) System, designing of Dies HPDC at otomotive component, etc., and he has published its to academics media/journal and has spoken at seminars or conferences in Indonesia and abroad.

VENUE :

Hotel Golden Flower, Bandung

TRAINING DURATION :

4 days

TRAINING TIME :

1. 4 – 7 Juli 2011


2. 7 – 10 November 2011

INVESTATION PRICE/PERSON :

1. Rp 7.250.000/person (full fare)  or


2. Rp 7.000.000/person (early bird, payment 1 week before training) or


3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified and experienced instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

Electrical Maintenance In Industry

Electrical Maintenance In Industry
Hotel Amaroossa, Bandung |Oktober 31 – 04 November  2011 | 08.00 – 16.00 | Rp 6.000.000,-




Tujuan Pelatihan

Pelatihan ini dimaksudkan untuk meningkatkan pengetahuan dan wawasan tentang dasar-dasar kelistrikan dan pemeliharaan utilitas listrik di industry. Topik pelatihan ditekankan instalasi, trouble shooting dan pemeliharaan utilitas.

Course Contents

• Basic Electricity


• AC Voltage Generation


• Properties of AC Circuits


• Impedance


• Voltage Drop


• Power and power factor


• Power Factor Correction


• Three phase power system

Peserta Pelatihan

Pelatihan ini diberikan pada para tehnisi, operator maupun supervisor yang bekerja dibidang ketenagalistrikan di industri untuk mampu memahami secara komprehensif masalah ketenagalistrikan.

Tanggal & Tempat

Tanggal     :

• Oktober 31 – 04 November  2011

Jam            : 08.00 – 16.00
Tempat     : Hotel Amaroossa Bandung
Jl. Aceh  No. 71A Bandung

Instruktur
Ir. Hasan Surya, MT




Biaya Pelatihan

• Rp 6.000.000,- (Enam Juta Rupiah).


• sudah termasuk
  
  
  
  • Fee Instruktur,
  
  
  • Handout,
  
  
  • Training kit,
  
  
  • 2X Coffee Break,
  
  
  • Lunch
  
  
  • dan Sertifikat.
  
  
  
  

 

AIR COMPRESSOR

AIR COMPRESSOR
Hotel Golden Flower,  Bandung |18 – 20 July 2011| Rp 5.750.000

INTRODUCTION :

Air compressor  usually is used  to control instrument system in operation, this equipment could be critical if the process to control hazard, this course will explain how to operate air compressor include control of maintenance.

 

TRAINING MATERIAL OUTLINE :

1. Air and gas behavior


2. Basic screw compressor operation


3. Screw compressor  design and construction


4. Inlet filter


5. Dryr


6. Air filter


7. Pressure flow controller


8. After cooler and lubricant cooler


9. Lubrication system


10. Compressor control

 

WHO SHOULD ATTEND THIS TRAINING?

Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa system tenaga.

 

TRAINING INSTRUCTOR

Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

 

VENUE :

Hotel Golden Flower Bandung

 

TRAINING DURATION :

4 days

 

TRAINING TIME :

1. 18 – 20 July 2011

 

INVESTATION PRICE/ PERSON :

1. Rp 5.750.000/person (full fare)  or


2. Rp 5.500.000/person (early bird, payment 1 week before training) or


3. Rp 5.250.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS :

1. Training Module


2. Flash Disk contains training material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. T-Shirt


6. Bag


7. Training Photo


8. Training room with Full AC facilities and multimedia


9. Lunch and twice coffeebreak every day of training


10. Qualified Instructor


11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

RECOMMENDATION TO PARTICIPANTS :

Participants are recommended to bring laptop for practice sessions

 

PROTECTIVE RELAY

PROTECTIVE RELAY

Grand Palace Hotel*** Yogyakarta |18-21 Mei 2011| 08.00 – 16.00 WIB | Rp. 4.500.000,-




DESKRIPSI

• Identify the Effects of Current Transformers (CTs) on Power Systems Protection.


• Recognize Protective Relay Coordination Related Disturbances and Outages.


• Collect the Required Data to Perform a Detailed Coordination Study.


• Derive Complete Protective Relay Device Settings to Protect the Electrical Power Systems Equipment.

PESERTA :

Consultants, application engineers, design engineers and electrical engineers from large industrial plants or municipal distribution systems with complex protective relay needs will find this course highly beneficial.




MATERI :

1. Introduction to Power Systems Relaying

• System Planning


• Power System Studies


• Phasor Fundamentals


• Relaying Principles


• Review of Short Circuit Calculations


• Fundamentals of Coordination

2. Power Systems Grounding

• Symmetrical Components


• Ungrounded Systems


• Solidly-Grounded Systems


• Resistance-Grounded Systems


• Ground Fault Detection Methods

3. Current Transformers

• Types, CT Ratios, Polarity


• Burden, Accuracy Classes, Saturation Calculations

4. Protection Fundamentals

• Line, Cables, Feeders


• Medium Voltage Motors


• Power Transformers

5. Protective Relay Schemes

• Directional Relays


• Differential Relays


• Ground Relays

INSTRUKTUR

Dr. Suharyanto
(Trainer Associate & Konsultan berbagai perusahaan serta aktif sebagai tenaga pengajar di UGM bidang Instrumentasi & Arus Kuat)

 

WAKTU & TEPAT

• 18-21 Mei 2011


• 08.00 – 16.00 WIB


• Grand Palace Hotel***

INVESTASI

Biaya kursus: Rp. 4.500.000,- per orang (Non Residential),

AIR CONDITIONING AND HVAC

AIR CONDITIONING AND HVAC

Hotel Golden Flower Bandung |11 – 15 April 2011| Rp 7.750.000/person

 

INTRODUCTION

This 5 day course is designed to broaden and increase knowledge of all participants on the industrial refrigeration system which includes HVAC system. In detail, the discussion will cover its selection, operation, maintenance and load calculation of air management.

To make this course more comprehensive, there will be an actual practice for all participants in the thermodynamic laboratory ITB.

The instructors will also first talk about the basic theory of the cooling and air conditioning system. Further more, the participant will also learn about refrigeration system, its components, selection guideline, characteristic of each components, operation and maintenance of the industrial refrigeration system.

 

Training Material Outline :

1.    Introduction to Refrigeration Systems and HVAC
2.    Theory of Refrigeration System as a basic to understand the cooling system

• Vapor compression cycle


• Absorption cycle


• Air cycle

3.    Basic Calculation of Air Conditioning System

• Basic concept of humidity, comfortable limit, etc.


• Psychometric diagram


• Load calculation of air conditioning

4.    Refrigeration System Components and Industrial refrigerant. Discussion on type, work principle, characteristic of the following  refrigeration components:

• Compressor


• Evaporator


• Condenser


• Expansion valve and components


• Chiller


• Refrigerant

5.    Industrial Refrigeration System for Industrial Application

• Classification of industrial refrigeration system


• Parameter and criteria of selection

6.    Refrigerant

• Type and characteristic


• CFC and Non CFC Refrigerant


• Selection guide of refrigerant

7.    Operation and Maintenance of Refrigeration System and HVAC

• Operation of refrigeration & HVAC system


• Maintenance of refrigeration and HVAC system


• Inspection of refrigeration and HVAC system


• Trouble shooting

8.    Practice of Basic Refrigeration System

• Actual practices at thermodynamic laboratory ITB on how to use refrigeration system tools & equipment. The tools and equipment were specially designed for practice purposes.

 

INSTRUCTOR

DR. Ir. I Made Astina, M.Eng & Dr. Ir. Nathanael P. Tandian

DR. Ir. I Made Astina, M.Eng. is currently assistant professor of mechanical Engineering, Faculty of Mechanical and Aerospace Engineering ITB. He graduated from Mechanical Engineering Department ITB in 1992. Prior to his Ph.D. obtainment in Engineering (thermodynamics, school of science for open and environmental systems) from Keio University Tokyo, Japan in 2004, he received Master of Science in Engineering (mechanical engineering department) from the same university in 1997. His researches concern on thermodynamic, development of new thermal systems, thermodynamic cycles, air conditioning and refrigeration systems. His papers were published in international and national journals, besides he also presents his papers in international and national seminars. Besides teaching at the university, he also has experiences to give short courses for industrial practical engineers and publics and to collaborate practical consultant works.

Dr. Ir. Nathanael P. Tandian completed his undergraduate study in the Mechanical Engineering Department ITB in 1983, then he joined the Mechanical Engineering Department of ITB as a faculty member (1984) and later the Thermodynamics Laboratory as a research staff (1985). He continued his graduate program at the University of Minnesota USA and got his MSME (1991). In 1994 he received his Ph.D. in the area of Thermodynamics and Head Transfer. He has been being intensively involved in many researches, technical training and seminars of refrigeration and thermal system. He has also been involved in several collaborative projects with oil and gas industries.

 

VENUE

Hotel Golden Flower Bandung

 

TRAINING DURATION

5 days

 

TRAINING TIME

11 – 15 April 2011

 

INVESTATION PRICE/PERSON

1. Rp 7.750.000/Peserta, exclude tax


2. Rp 7.500.000/Peserta (Early Bird untuk pembayaran 1 minggu sebelum training)


3. Rp 7.250.000/peserta (untuk 3 peserta atau lebih dari perusahaan yang sama)

 

FACILITIES FOR PARTICIPANTS

1. Training Module


2. Flash Disk contains training material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. T-Shirt


6. Backpack


7. Training Photo


8. Training room with full AC facilities and multimedia


9. Lunch and twice coffeebreak everyday of training


10. Qualified instructor


11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

RECOMMENDATION FOR PARTICIPANTS

For practice session: each participant is recommended to bring notebook/laptop for softwares installation and practice session

 

Genset Operation & Maintenance Training

Genset Operation & Maintenance Training
Hotel Amarossa, Bandung | 20 s.d 24 Juni 2011 | 08.00 – 16.00 | Rp 6.000.000,-
Hotel Amarossa, Bandung | 17 s.d 21 Oktober 2011 | 08.00 – 16.00 | Rp 6.000.000,-

 

Objective

1. Peserta mengetahui macam – macam mesin pembakaran dalam & macam – macam generator listrik.


2. Peserta mengetahui klasifikasi mesin diesel dan generator listrik.


3. Peserta mampu melakukan pelacakan gangguan dan melakukan perbaikan pada mesin diesel dan generator listrik.


4. Peserta mampu melakukan instalasi,  pengujian dan pencegahan gangguan pada genset.


5. Peserta mampu melakukan pemeliharaan dan perawatan pada genset.

 

Materi  Pelatihan

a.    Engine Review

• Klasifikasi dan prinsip kerja mesin pembakaran dalam ( dua langkah dan empat langkah). Pengukuran pada mesin diesel (Efficiency, Torque, Speed & Power), komponen – komponen mesin diesel dan fungsinya.

b.    Sistem Pembakaran

• Sistem pembakaran pada mesin diesel


• Perhitungan kebutuhan udara teoritis (AFR)

c.    Trouble Shooting & Maintenance Diesel Engine

• Kurva kinerja mesin diesel dan sistem kontrol, inspection, tuning dengan menggunakan engine analyzer, adjustment inspection, maintenance & repair, troubleshooting analysis.

d.    Macam – macam Generator Listrik

• Generator AC


• Generator DC

e.    Klasifikasi Generator Listrik

• Spesifikasi, rating temperatur, isolasi, tipe operasi, pemanasan & pendinginan, kelas perlindungan  (International Protection)

f.    Pembebanan

• Beban konstan, beban berubah


• Mengontrol kecepatan


• Pelacakan gangguan dan perbaikan

g.    Pemilihan Generator

• Cara menentukan spesifikasi mekanik


• Cara menentukan spesifikasi Elektrik


• Perincian yang diperlukan dalam pemilihan generator listrik

h.    Instalasi dan Pengujian untuk mencegah gangguan

• Instalasi


• Pengawatan dan pentanahan


• Cara operasi untuk pencegahan gangguan

 

Instruktur

Ir. Yusuf Sofyan, MT

Tanggal  & Tempat Pelatihan

Tanggal         :

• 20 s.d 24 Juni 2011


• 17 s.d 21 Oktober 2011

Tempat         :  Hotel Amarossa Bandung

Biaya Pelatihan

• Rp 6.000.000,- (Enam Juta Rupiah).


• sudah termasuk
  
  
  
  • Hand out,
  
  
  • Training kit,
  
  
  • Sertifikat,
  
  
  • Lunch,
  
  
  • 2X Coffee break.
  
  
  
  


• tidak termasuk Pajak – Pajak dan Akomodasi Penginapan.

 

 

ELECTRICAL CALIBRATION

ELECTRICAL CALIBRATION
Hotel Golden Flower Bandung |18 – 20 April 2011| Rp 5.250.000/peserta
Hotel Golden Flower Bandung | 26 – 28 September 2011| Rp 5.250.000/peserta

TRAINING OBJECTIVE :

Pelatihan ini memberikan pengetahuan dan pemahaman kepada peserta terhadap metode dan Teknik Kalibrasi Elektrik. Pelatihan ditekankan pada teknik kalibrasi Instrumen Ukur besaran-besaran Elektrik. Dengan mengikuti pelatihan ini diharapkan peserta dapat :

1. Memahami prinsip-prinsip pengukuran


2. Mengetahui standarisasi pengukuran


3. Mengetahui Teknik-teknik Kalibrasi


4. Melakukan Kalibrasi alat-alat ukur Listrik

 

TRAINING MATERIAL OUTLINE :

1. Measurement Terminology
   
   
   
   • Scope of Metrology,
   
   
   • Measurement Processes,
   
   
   • Units,
   
   
   • Measurement error,
   
   
   • Classification of Error,
   
   
   • Error vs. Accuracy
   
   
   
   


2. Measurement Uncertainty
   
   
   
   • Purpose of a Measurement,
   
   
   • Accuracy Concept,
   
   
   • Error types,
   
   
   • Estimating Measurement Uncertainty of a Calibration Process
   
   
   
   


3. Technical Requirements in Calibration Standards
   
   
   
   • Calibration Program-Operations,
   
   
   • Calibration Procedure Template,
   
   
   • Handling,
   
   
   • Records
   
   
   
   


4. Types of Standards
   
   
   
   • Oscilloscope Calibrators,
   
   
   • Multifunction Calibrators,
   
   
   • Counters,
   
   
   • LF Spectrum Analyzers & FFTs
   
   
   
   


5. Calibration of current and voltage Meter


6. Calibration of Power and Energy Meter


7. Calibration of decade resistance boxes


8. Practical Considerations for Precision Electrical Measurement
   
   
   
   • Shielding from Electric Fields;
   
   
   • Magnetic Field Coupling;
   
   
   • Minimizing Magnetic Pickup;
   
   
   • Magnetic Shielding, Guarding: Instrument Guard;
   
   
   • High-Impedance Measurements
   
   
   
   

 

PESERTA PELATIHAN :

Minimum SLTA : untuk para operator, teknisi, engineer yang ingin mengetahui/mendalami teknik kalibrasi alat-alat ukur listrik

 

INSTRUCTOR :

Ir. Hasan Surya, MT. and Team

Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN)  and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for  many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences  and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

VENUE :

Hotel Golden Flower Bandung

 

TRAINING DURATION :

3 days

 

TRAINING TIME :

1. 18 – 20 April 2011


2. 26 – 28 September 2011

 

INVESTATION PRICE/ PERSON :

1. Rp 5.250.000/person (full fare)  or


2. Rp 5.000.000/person (early bird, payment 1 week before training) or


3. Rp 4.750.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS :

1. Training Module


2. Training CD contains training material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or waistcoat


6. Bag or backpackers


7. Training Photo


8. Training room with full AC facilities and multimedia, with lunch and twice coffeebreak everyday of training


9. Qualified instructor


10. Practice session in laboratory


11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Electrical and Mechanical Safety

Electrical and Mechanical Safety

Yogyakarta|25- 26 April 2011 (2 days training) | 08:00-16:00 WIB |Rp 3.200,000,-/peserta (Non resindential)

 

Description

Sebagian besar penyebab kebakaran di perkotaan/daerah industrial adalah karena listrik dimana besarnya kerugian secara material selama tahun 2003 adalah sebesar Rp.23 Milyar! Bagaimana apabila hal itu terjadi pada perusahaan tempat ada bekerja?

Standar OHSAS mengenai bahaya-bahaya listrik dan mekanikal terhadap pekerja, mewajibkan perusahaan memberikan pendidikan dan latihan Electrical and Mechanical Safety. Adapun pekerja wajib memberitahu perusahaan melalui atasannya (supervisor) apabila menemukan bahaya-bahaya listrik dan mekanikal di area perusahaan. Oleh karena itu, Centra Safety – PT Centragama Indovisi bermaksud menyelenggarakan pelatihan ini. Dengan mengikuti pelatihan ini diharapkan pekerja dapat mengetahui dan mengerti bahaya-bahaya listrik dan mekanikal di tempatnya bekerja sehingga perusahaan akan terhindar dari kerugian-kerugian besar akibat kebakaran ataupun kejadian fatal pekerja.

 

Objective:

Setelah mengikuti pelatihan ini diharapkan peserta:

• Dapat mengerti metode mengidentifikasi bahaya listrik dan mekanikal di tempat kerja


• Dapat mengerti metode menggunakan peralatan listrik dan mekanikal dengan aman


• Dapat mengetahui efek arus listrik pada badan manusia, klasifikasi daerah bahaya, isolasi energi (LOTO)


• Dapat mengerti program pencegahan bahaya mekanikal (Machine Guarding)

 

Outline:

Day 1:

• Konsep Dasar Safety


• Identifikasi Hazard


• Hazard Elektrikal


• Electrical Safety


• Lock Out tag Out (LOTO)


• Klasifikasi Area Hazardous

 

Day 2:

• Grounding, Bonding and Lightning


• Power Tools Safety


• Hazard Mekanikal and Assesmen Resiko


• Program Mekanikal Safety


• Studi Kasus: Kecelakaan Mekanikal


• Pelatihan Safety untuk maintenance

 

Who Should Attend

• Electrician/Mekanik


• Maintenance Superintendent/Supervisor


• Penanggung jawab HSE


• Operator Produksi.

 

Instruktur :

Tugino, ST, MT

Instruktur adalah pakar di bidang electrical & mechanical, sering menjadi nara sumber untuk training electrical & machenical safety di beberapa instansi/perusahaan

Course Method

• Presentation


• Discuss


• Case Study


• Post Test


• Evaluation

 

Fee:

Rp 3.200.000,- /participant (non residensial)*

Special Rate:

Rp 2.750.000,- (min 3 participants from the same company)

 

 

Waktu dan Tempat Pelaksanaan :

• 25 - 26 April 2011 (2 days training)


• Yogyakarta

 

Advance Troubleshooting UPS

Advance Troubleshooting UPS

The Grand Palace Hotel, Yogyakarta|23 - 26 Mei 2011 | 08.00 – 16.00 WIB | Rp. 4.500.000,-

DESKRIPSI

Kontinuitas pelayanan Daya Listrik dalam suatu Industri sangatlah vital, karena hal ini menyangkut proses produksi. Untuk mendapatkan keandalan system catu daya listrik dalam menjamin kontinuitas pelayanan diperlukan suatu Sistem Catu Daya tak terputus (Uninterruptible Power Suply), oleh karena itu kehadiran UPS sangatlah penting terutama untuk beban-beban yang bersifat kritis.

PESERTA :

Electrical Engineers, Electrical Maintenance Tradespeople & Technicians, Instrumentation and Control Engineers, Power System Protection and Control Engineers, etc.

MATERI

• Sistem UPS Overview (System Configuration, Principle of Operation, Types of UPS System)


• Semiconductor on UPS System (Component Characteristic, Component Parameters, Component Selection)


• Digital System on UPS (Logic Gates, Sequencial Component, System Display)


• Signal Processing on UPS (Operational Amplifier, Comparator Circuits, Pulse Width Modulator Circuits)


• Converter AC to DC (Types of Converters, Converter topology, Principle of Operation, Filter Circuit)


• Battery and Battery Charger (Types of battery, battery Characteristics, Types of Battery Charger)


• DC to AC Converter (Types of Converters, Converter topology, Principle of Operation, Filter Circuit)


• UPS Protection (Over Current Protection, Surge Protection, dv/dt protection, di/dt protection)


• UPS TroubleShooting Techniques (Abnormal Conditions on AC to DC Converter, Abnormal Conditions on Charger System, Abnormal Conditions on DC to AC Converter)

INSTRUKTUR

Hasan Surya, Drs., Ir., MT

WAKTU & TEPAT

• 23 - 26 Mei 2011


• 08.00 – 16.00 WIB


• The Grand Palace Hotel, Yogyakarta

INVESTASI

Biaya kursus: Rp. 4.500.000,- per orang (Non Residential),

TRAINING DASAR PNEUMATIK

TRAINING DASAR PNEUMATIK
Polikteknik Negeri Bandung| 14 s.d 15 Juni 2011| Rp 3.000.000,-
Polikteknik Negeri Bandung| 13 s.d 14 September  2011| Rp 3.000.000,-
Polikteknik Negeri Bandung| 06  s.d 07 Desember 2011| Rp 3.000.000,-


 

Tujuan Pelatihan

Memberikan suatu wawasan industri dalam merancang kontrol pneumatik yaitu kombinasi fungsi pneumatik sebagai penggerak aktuator dalam aplikasi kontrol proses industri.

 

Materi  Pelatihan

• Pengkajian prinsip-prinsip sistem pneumatik


• Fungsi dan penggunaan komponen-komponen pneumatik


• Pemahaman dan penggambaran simbol-simbol pneumatik sesuai standar ISO


• Fungsi dan cara kerja katup 3/2, 4/2 dan 5/2


• Fungsi logika AND/OR/XOR


• Teknologi dan Aplikasi Pressure Sequence dan Time Delay


• Simulasi rangkaian kontrol dan Trouble Shooting

 



Instruktur

• Adri Maldi, Msc


• Ir Ali mahmudi M Eng


• Ir Aris Suryadi

 

Tempat & Tanggal Pelatihan

• Tanggal        :

1. 14 s.d 15 Juni 2011


2. 13 s.d 14 September  2011


3. 06  s.d 07 Desember 2011

• Jam               : 08.00 – 16.00


• Tempat        : Polikteknik Negeri Bandung Jl. Ciwaruga – Bandung   ( Tentative)

 

Biaya Pelatihan

• Rp 3.000.000,- (Empat Juta Rupiah).


• Biaya tersebut sudah termasuk Modul, Training kit,  Sertifikat dan Kartu lisensi  dari Depnakertrans RI, makan siang serta 2X rehat kopi.

 

Gearbox Technology: Design, Analysis, Testing, Maintenance, Lubrication, and Failure - YOGYAKARTA

Gearbox Technology: Design, Analysis, Testing, Maintenance, Lubrication, and Failure - YOGYAKARTA

Hotel  IBIS  Yogyakarta| Yogyakarta  10 – 13 Mei 2011 |IDR  6.500.000,-
Hotel  IBIS  Yogyakarta | Yogyakarta  21 – 24 Juni  2011|IDR 6.500.000,-

 

OBJECTIVES

1. Understand the standard of setting up plan for gearbox


2. Make the gearbox recalculation and planned


3. Classification and analysis of gear


4. Gear Box Maintenance


5. Measurement Technique and gear Box testing


6. Gearbox failure Analysis

 

COURSE OUTLINE

A. Introduction

• Application of Gear System


• Gear Classification


• Gear Nomenclature


• Power Train


• Gear Standard


• Unit System

B. Gear Analysis

• Power Train


• Stress and Deflection


• Strength/ Allowable Stress


• Fatigue


• Gear Design Life

C. Gear Design

• Spur Gear


• Helix Gear


• Gearbox


• Case Study

• o Spur Gear Design


• o Helix Gear Design

D. Measurement and Testing

• Principles of Measurement


• Geometry Measurement


• Vibration Measurement


• Noise Measurement


• Gear System Efficiency


• Gear Testing

E. Maintenance and Lubrication

• Maintainability and Maintenance


• Maintenance in Product Life Cycle


• Life Cycle Cost


• Why We Need the Maintenance


• Maintenance Category


• Gear Maintenance


• Lubrication


• Gear Lubrication


• Power Losses in Gear


• Type of Gear Lubrication


• Lubrication for Loaded Gear


• Influence of Gear Lubrication on Surface Distress

F. Gear Failure

• Failure Classification


• Wear


• Surface Fatigue


• Plastic Flow


• Breakage


• Hertz Contact


• Case Study of Gear Failure

 

PARTICIPANTS

Mechanical Engineers, Maintenance Engineers and supervisors, Service Engineers and supervisors and everyone who want to enlarge their knowledge

 

METODE

lecturing, workshop, interactive consultation, and case study

 

INSTRUKTUR

Dr. Ir Viktor Malau DEA

 

WAKTU

• Yogyakarta  10 – 13 Mei 2011


• Yogyakarta  21 – 24 Juni  2011

 

TEMPAT

Hotel Ibis Yogyakarta

 

INVESTASI

• IDR  6.500.000 – (non residential )


• (termasuk picking-up service dari Bandara/Stasiun KA ke hotel, training modul, training kit, 2x coffee break, 1x lunch, souvenir, dan sertifikat)

 

Electrical Equipment Maintenance - YOGYAKARTA

Electrical Equipment Maintenance - YOGYAKARTA

Hotel Grage Ramayana Yogyakarta | Yogyakarta  12 – 14 April 2011|IDR 4.000.000,-
Hotel Grage Ramayana Yogyakarta | Yogyakarta  14 – 16 Juni 2011|IDR 4.000.000,-

 





COURSE OUTLINE

1. Introduction to electrical equipment maintenance, testing and troubleshooting

• Why maintain and test


• Overview of electrical preventive maintenance and testing


• Planning an EPM program


• Overview of testing and troubleshooting methods


• Review of dielectric theory and practice

2. Electrical safety, switching practices and precautions

• Introduction


• Electrical fire emergencies


• Effects of electrical shock


• First aid

3. Direct current voltage testing of electrical equipment

• Direct current voltage testing of insulation


• DC testing methods


• Transformer


• Cable and accessories


• Electrical switchgear and circuit breakers


• Motors and generators


• Evaluation of test data readings


• Precautions when making direct current test

3. Alternating current voltage testing methods

• Power factor and dissipation factor test methods


• Description of the power factor test equipment


• Basic test connections (test modes) for PF testing


• Safety precautions with PF testing


• PF testing of electrical apparatus insulation

4. Maintenance of electrical equipment

• Preventive maintenance of transformer


• Transformer testing


• Maintenance of cables


• Cable failures and their analysis


• Electrical switchgear maintenance and care


• Infrared inspection of electrical equipment


• Motor and generator maintenance


• Testing of motor and generator

 

PARTICIPANTS

1. Electric Engineer/ Supervisor/ Superintendent


2. Power Plant Maintenance Engineer/ Supervisor/ Superintendent


3. Power Plant Operation Engineer/ Supervisor/ Superintendent


4. Everybody or professional who wants to broaden knowledge or gain Benefit from this course

 

METODE

lecturing, workshop, interactive consultation, and case study

 

INSTRUKTUR

Tugino ST MT

 

WAKTU

• 12 – 14 April 2011


• 14 – 16 Juni 2011

 

TEMPAT

Hotel Grage Ramayana Yogyakarta

 

INVESTASI

• IDR  4.000.000 – (non residential )


• (termasuk picking-up service dari Bandara/Stasiun KA ke hotel, training modul, training kit, 2x coffee break, 1x lunch, souvenir, dan sertifikat)

Electrical Maintenance in Industry - YOGYAKARTA

Electrical Maintenance in Industry - YOGYAKARTA
Hotel Grage Ramayana Yogyakarta | Yogyakarta  24 – 27 Mei  2011|IDR  5.500.000,-
Hotel Grage Ramayana Yogyakarta | Yogyakarta  21 – 24 June 2011 | IDR  5.500.000,-

 





OBJECTIVES

Pelatihan ini dimaksudkan untuk meningkatkan pengetahuan dan wawasan tentang dasar-dasar kelistrikan dan pemeliharaan utilitas listrik di industry. Topik pelatihan ditekankan instalasi, trouble shooting dan pemeliharaan utilitas.

 



OUTLINE

1. Basic Electricity


2. AC Voltage Generation


3. Properties of AC Circuits


4. Impedance


5. Voltage Drop


6. Power and power factor


7. Power Factor Correction


8. Three phase power system

 

PARTICIPANTS

Pelatihan ini diberikan pada para tehnisi, operator maupun supervisor yang bekerja dibidang ketenagalistrikan di industri untuk mampu memahami secara komprehensif masalah ketenagalistrikan.

 

METODE

lecturing, workshop, interactive consultation, and case study

 

INSTRUKTUR

Ir. Teguh Puji Purwanto, MT

 

WAKTU

• Yogyakarta  24 – 27 Mei 2011


• Yogyakarta  21 – 24 June 2011

`

TEMPAT

Hotel Grage Ramayana Yogyakarta

 

INVESTASI

• IDR  5.500.000 – (non residential )


• (termasuk picking-up service dari Bandara/Stasiun KA ke hotel, training modul, training kit, 2x coffee break, 1x lunch, souvenir, dan sertifikat)

 

Electric Generator-Set: Selection Operation, Maintenance and Troubleshooting - YOGYAKARTA

Electric Generator-Set: Selection Operation, Maintenance and Troubleshooting - YOGYAKARTA

Hotel Grage Ramayana Yogyakarta | Yogyakarta  3 – 5  Mei  2011|IDR  7.000.000,-

 





OBJECTIVES

1. Enhance understanding of electric power generator set operation and maintenance, and principles of each main parts


2. Enhance understanding of synchronous generator characteristics and precautions


3. Learn how to run parallel operation and perform load sharing of generator correctly


4. Learn how to inspect prime mover (diesel engine) operational characteristics properly


5. Enhance knowledge of protections apparatus and maintenance aspects of diesel generator set.

 



OUTLINE

Introduction to Electrical Power Generation System

• Overview of power generation system characteristics


• Load considerations

Synchronous Generator Characteristics

• No load characteristic


• Short circuit characteristic


• Loading characteristics


• Excitation system and automatic voltage regulator


• Generator protection system


• Practice at Electrical Energy Conversion Laboratory of ITB

Parallel Operation of Generator

• Introduction


• Synchronizing generators


• Operation charts


• Load sharing

Active load sharing

Reactive load sharing

• Practice at Electrical Energy Laboratory of ITB


• Prime Mover (Diesel Engine) Characteristics


• Introduction


• Fundamental of operating principles


• Type of governors and speed control


• Practice at Electrical Energy Conversion Laboratory of ITB

Maintenance of Diesel Engine-Driven Electric Generator

• Maintenance Strategy


• Preventive maintenance program


• Maintenance records


• Servicing schedule

 

METODE

lecturing, workshop, interactive consultation, and case study

 

INSTRUKTUR

Dr. Ir Viktor Malau DEA

 

WAKTU

• Yogyakarta  3 – 5  Mei  2011

`

TEMPAT

Hotel Grage Ramayana Yogyakarta

 

INVESTASI

• IDR  7.000.000 – (non residential )


• (termasuk picking-up service dari Bandara/Stasiun KA ke hotel, training modul, training kit, 2x coffee break, 1x lunch, souvenir, dan sertifikat)

BASIC ELECTRICAL FOR NON ELECTRICIAN

BASIC ELECTRICAL FOR NON ELECTRICIAN

Hotel Golden Flower Bandung | 25 – 29 July 2011 | Rp 7.450.000,-
Hotel Golden Flower Bandung |19 – 23 December 2011| Rp 7.450.000,-

 

TRAINING OBJECTIVES :

Tujuan dari training ini adalah untuk menambah wawasan mengenai konsep dasar sistem kelistrikan. Pelatihan ditekankan pada pemahaman mengenai aspek pemanfaatan energi listrik, penggunaan peralatan-peralatan listrik serta aspek keselamatan dalam pemanfaatan sistem kelistrikan. Dengan demikian setelah mengikuti pelatihan ini peserta akan dapat :

1. Memahami hukum-hukum Dasar kelistrikan


2. Memahami mengenai konfigurasi jaringan Tenaga Listrik dari pembangkitan hingga pemanfaatan


3. Memahami cara melakukan perhitungan biaya penggunaan energi


4. Memahami prinsip kerja, instalasi dan penggunaan mesin-mesin listrik


5. Memahami mengenai aspek-aspek keselamatan dalam sistem kelistrikan


6. Memahami cara memproteksi peralatan listrik

SIAPA SEBAIKNYA MENGHADIRI TRAINING INI?

Pelatihan ini diberikan pada para non-electrical engineer, teknisi, operator maupun supervisor yang bekerja dan bertanggung jawab terhadap pekerjaan bidang ketenaga listrikan di industry, bangunan maupun manufaktur. Dan atau semua pihak yang ingin memahami hal-hal yang terkait dengan kelistrikan.

TRAINING MATERIAL OUTLINE :

1. Basic Electrical Concepts & Definitions
   
   
   
   • System overview,
   
   
   • Elements of Electrical Power System,
   
   
   • per-unit System
   
   
   
   


2. Electrical Cost Calculation & Evaluation


3. Electrical Distribution Systems
   
   
   
   • Electrical Power System Configuration,
   
   
   • Electrical Distribution Network,
   
   
   • Distribution Panel
   
   
   
   


4. Electrical Machines
   
   
   
   • Electrical Motor Fundamental,
   
   
   • Motor Starting and Braking,
   
   
   • Motor Protection
   
   
   
   


5. Electrical Safety
   
   
   
   • Basic Safety Concepts,
   
   
   • Electrical Hazards,
   
   
   • Safe Operation
   
   
   
   


6. Grounding System
   
   
   
   • Purpose of Grounding,,
   
   
   • Standards (National/IEEE/IEC),
   
   
   • Grounded vs. Ungrounded,
   
   
   • Distribution Grounding Electrodes
   
   
   
   


7. Overcurrent Protection
   
   
   
   • Need for protection,
   
   
   • Types of fault and Calculation ,
   
   
   • Over current protection devices characteristics,
   
   
   • Application to Industrial Electrical Utilities protection
   
   
   • Application to line protection
   
   
   
   


8. Power Quality
   
   
   
   • Types of disturbances,
   
   
   • Harmonics Sources,
   
   
   • Harmonics Mitigation
   
   
   
   


9. Cases Study and Practices


10. Interactive Discussion

TRAINING INSTRUCTOR

Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN)  and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for  many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences  and now he is ready to share his knowledge and experiences to industrial world throught training class.

VENUE :

Hotel Golden Flower Bandung

TRAINING DURATION :

5 days

TRAINING TIME :

1. 25 – 29 July 2011


2. 19 – 23 December 2011

INVESTATION PRICE/ PERSON :

1. Rp 7.450.000/person (full fare)  or


2. Rp 7.250.000/person (early bird, payment 1 week before training) or


3. Rp 6.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

PELATIHAN & SERTIFIKASI TOT OPERATOR ALAT BERAT

PELATIHAN & SERTIFIKASI TOT OPERATOR ALAT BERAT

Yogyakarta| April 5 - 8 , 2011 | 08:00-16:00 WIB |Rp 5.500,000,-/peserta

 

Description

Alat berat adalah segala macam peralatan/pesawat mekanis termasuk attachment & implementnya baik yang bergerak dengan tenaga sendiri (self propelled) atau ditarik (towed-type) maupun yang diam ditempat (stationer) dan mempunyai daya lebih dari satu kilo-watt, yang dipakai untuk melaksanakan pekerjaan-pekerjaan kontruksi pertambangan, industri umum, pertanian/kehutanan dan/atau bidang-bidang pekerjaan lainnya, sepanjang tidak merupakan alat processing langsung“

Dalam pengoperasian alat berat banyak hal dan aspek yang harus diperhatikan, mulai dari ketrampilan dan skill operator, prosedur pengoperasian alat, aspek keselamatan kerja (K3) dan aspek perawatan dan troubleshooting.

Karena begitu komplek dan besarnya resiko alat berat, sehingga membutuhkan system dapat mencover semua aspek tersebut dan SDM yang benar-benar mengusahi berbagai aspek diatas. Untuk itu dibutuhkan program-program training, mentoring dan coaching secara intensif dan terus-menerus. Disinilah muncul kebutuhan tenaga-tenaga trainer/ instruktur yang berkompeten untuk memenuhi semua aspek terkait dengan alat berat.

Bagi perusahaan dengan asset alat berat yang besar, Training of Trainer alat berat menjadi kebutuhan yang perlu segera dipenuhi agar dapat menghasilkan tenaga-tenaga trainer yang berkompeten, handal dan menguasahi teknis dan metode yang efektif untuk proses training, mentoring dan coaching alat berat.

 

Tujuan

Training of Trainer alat berat ini bertujuan untuk :

1. Memberikan pemahaman tentang berbagai aspek dalam pemggunaan alat berat;


2. Memberikan kemampuan teknis trainer sehingga dapat memberikan training secara efektif kepada orang lain (rekan kerja);


3. Memberikan motivasi peserta agar lebih maju dalam penguasahaan berbagai hal terkait dengan alat berat.

 

Materi

1. KELOMPOK DASAR

• Manajemen Forum dan Communication & Presentation Skill


• Metode Training, Mentoring dan Coaching


• Evaluasi Proses Training


• Praktik Lapangan

 

2. KELOMPOK INTI

• Dasar-Dasar Alat Berat,


• Jenis-Jenis Alat Berat
  


• Regulasi dan Perundang-Undangan Seputar Alat Berat


• Penyusunan Kurikulum dan Materi Training Alat Berat


• Evaluasi Proses Training


• Praktik Lapangan


• Motor Penggerak


• Pengetahuan Bahan Bakar dan Pelumas,


• Perawatan dan Pemeliharaan Alat Berat


• Maintenance & Replacing


• Fast Moving Spare Part


• Replacement & Disposal


• Produktivitas alat dan kombinasi alat


• Dasar-Dasar K3 Alat Berat


• Pengantar First Aid

 

Peserta

Pelatihan ini sangat relevan diikuti oleh staf SDM, Diklat, Jajaran supervisor yang menghandle pengoperasian alat berat..

 

Metode Kursus

• Presentation


• Discuss


• Case Study


• Evaluation


• Simulation

 

Koordinator

Tim Pakar Alat Berat dari Depnakertrans Republik Indonesia

 

Sertifikat
Bagi peserta yang memenuhi kriteria kelulusan baik teori maupun praktek akan diberikan sertifikat dari pihak terkait.

 

Biaya :

• Rp 5.500.000/ Peserta


• Rp 5.000.000/Peserta Untuk Pengiriman min 3 peserta dari Perusahaan yang sama.

 

Fasilitas

• Module / Handout


• Sertifikat


• Souvenir


• Training Kit