BEARING LUBRICATION TECHNOLOGY

BEARING LUBRICATION TECHNOLOGY
Hotel Banana Inn, Bandung | 25 – 28 July 2011 | Rp 7.250.000/person

Setelah training ini peserta :

1. Memiliki pemahaman yang baik tentang dasar-dasar lubrikasi.


2. Dapat memilih dan menentukan pelumas yang tepat untuk mesin-mesin.


3. Memperbaiki perencanaan preventive maintenance dengan baik.


4. Mengetahui dan memahami lube oil analysis / program preventive
   maintenance


5. Membuat kegagalan komponen (bearing, gearbox) karena aus.


6. Melakukan troubleshooting yang berhubungan dengan sistem pelumasan.

 

TUJUAN TRAINING :

Setelah Pelatihan para peserta diharapkan akan lebih :

• Memahami parameter-parameter serta pengaruhnya dalam operasi roller bearing dan pelumas (lubricant)


• Memahami cara-cara melakukan operasi dan perawatan roller bearing yang tepat


• Memahami faktor-faktor penyebab kemerosotan pelumas


• Mampu mencari penyebab kegagalan dan cara penanganannya

 

TRAINING MATERIAL OUTLINE :
1.    Fundamental lubrication

• teori gesekan  dan pelumas


• jenis jenis pelumas

2.    Oli

• viskositas


• mengukur viscositas, efek temperatur dan tekanan.

3.    Memilih dan menentukan  viskositas
4.    Additive.

• Unsur unsur additive


• additive pada gearbox, motor bakar.

5.    Grease

• consistency


• NGLI grade


• memilih grease


• additive pada grease


• Aplikasi pelumas untuk pabrik  kertas.

6.    sistem lubrikasi pada pompa.

• sistem  lubrikasi mesin diesel dan alat berat


• sistem lubrikasi pada steam turbine


• sistem lubrikasi pada kompresor


• sistem lubrikasi pada paper machine


• Maintenance total solusi - program lubrikasi

7.    Bagaimana merencanakan program preventive maintenance untuk lubrikasi.

• kerja kelompok : bagai mana membuat planning lubrikasi.

8.    Menentukan interval lubrikasi
9.    Phenomena Vibrasi dan problem yang ditimbulkan oleh pelumas /predictive

• Maintenance


• studi kasus :  analisa vibrasi.


• kerusakan bearing akibat kesalahan lubrikasi.

10.    Problem troubleshooting yang berhubungan dengan pelumas.
11.    keausan pada journal bearing.
12.    kerusakan pada bearing.
13.    kerusakan pada gearbox.
14.    Lube oil analysis.

• Standard oil testing. TAN Number, counting particle, ect.

15.    Reliability improvement on lube oil.
16.    Handling and storage pelumas dan Safety

 

TRAINING INSTRUCTOR

Ir. Deddy Nugraha

Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

 

VENUE :

Hotel Banana Inn, Bandung

 

TRAINING DURATION :

4 days

 

TRAINING TIME  :

1. 25 – 28 July 2011

 

INVESTATION PRICE/PERSON :

1. Rp 7.250.000/person (full fare)  or


2. Rp 7.000.000/person (early bird, payment 1 week  before training) or


3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

 

REFRACTORY AND HEAT INSULATION

REFRACTORY AND HEAT INSULATION
Hotel Golden Flower Bandung | 25 – 28 Juli 2011 | Rp 7.250.000/person
Hotel Golden Flower Bandung | 12 – 15 Desember 2011 | Rp 7.250.000/person

INTRODUCTION

Training ini ditujukan kepada peserta yang ingin memahami tentang refraktori dan material refraktori serta aplikasi pada heat insulation. Banyaknya radiasi panas dan adanya system suhu rendah pada banyak lokasi di industry membawa kita kepada perlunya pemahaman yang baik tentang teknologi untuk mengaturnya. Setelah training ini peserta bisa memahami teknologi yang berkaitan dengan refractori dan heat insulation dan bagaimana mengimplementasikannya di lapangan.

 

TRAINING MATERIAL OUTLINE/CAKUPAN MATERI TRAINING

1. Introduksi perpindahan panas: konduksi, konveksi dan radiasi


2. Perpindahan panas gabungan konduksi, konveksi dan radiasi


3. Angka konduksi material


4. Physical properties of heat insulating materials


5. Physical properties of heat refractories materials


6. Pengelompokkan (class) insulator


7. Pemilihan insulator dan refraktori


8. Pengaruh ketebalan insulator pada laju perpindahan panas


9. Ketebalan kritis insulator


10. Efek konduksi lingkungan pada penyekatan (insulasi) panas


11. Dinding ruang bakar


12. Insulator temperatur tinggi


13. Insulator temperatur rendah (refrigerasi dan pengkondisian udara)


14. Ekspansi  dan penyusutan termal


15. Troubleshooting insulating materials and refractories


16. Studi kasus dan diskusi

 

INSTRUCTOR

Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti Coal Energy Training, Argonne, Chicago, Ill., USA, Combustion Training, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy. Pak Pawito Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training  untuk banyak perusahaan di Indonesia diantaranya seperti Chevron Indonesia Company, Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC  SES LTD, PLTGU  BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain.  Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

 

VENUE

Hotel Golden Flower Bandung

 

TRAINING DURATION

4 days

 

TRAINING TIME

1. 25 – 28 Juli 2011


2. 12 – 15 Desember 2011

 

INVESTATION PRICE/PERSON

1. Rp 7.250.000/person (full fare)  or


2. Rp 7.000.000/person (early bird, payment 1 week before training) or


3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified instructor


11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

TEKNIK PEMELIHARAAN KENDARAAN

TEKNIK PEMELIHARAAN KENDARAAN
(PREVENTIVE MAINTENANCE UNTUK KENDARAAN)
Hotel Jayakarta | 20 – 24 Juni 2011| Rp 7.500.000/peserta
Hotel Jayakarta | 19 – 23 September 2011| Rp 7.500.000/peserta

TUJUAN :

Setelah pelatihan peserta diharapkan dapat memahami teori dasar tentang mesin bensin & diesel kendaraan, dapat mengoperasikan, merawat, dan memecahkan masalah yang timbul pada kendaraan

 

CAKUPAN MATERI TRAINING :

1. Dasar-dasar Motor Pembakaran dalam : Pendahuluan, penggolongan & pengertian Motor Pembakaran Dalam, prinsip pengubahan tenaga pada motor bakar, macam-macam Motor Pembakaran Dalam, macam-macam konstruksi motor bakar torak, penggolongan motor bakar torak .


2. Siklus Kerja 2 Tak (langkah) & 4 Tak (langkah) : pengertian, proses isap, kompresi, usaha/kerja, dan buang pada motor bensin dan diesel.


3. Sistem Penyalaan : macam-macam sistem penyalaan, sistem pengapian baterai & magnet, macam-macam rangkaian silinder, urutan pengapian, macam-macam sistem pelumasan dan pendinginan.


4. Definisi-definisi dasar : Volume silinder, volume motor, perbandingan kompresi, daya, momen torsi, efisiensi, faktor-faktor yang mempengaruhi besarnya rasio kompresi.


5. Prinsip Dasar mesin bensin & diesel kendaraan : Prinsip kerja, penggolongan motor diesel, Injeksi langsung & tak langsung, Super Charger & Turbo Charger.


6. Perbedaan Motor Diesel & Bensin : proses kerja, perbedaan pembentukan campuran, perbedaan proses pembakaran, perbedaan momen putar, putaran, daya dan efisiensi.


7. Sistem Bahan Bakar Motor Bensin & Diesel : Tangki bahan bakar, pompa transfer, advans saat penyemprotan,saringan, pompa injeksi, governor, injektor/ nosel, busi pemanas.


8. Pompa Injeksi & Injektor : Jenis-jenis pompa injeksi & injektor, cara kerja, penyetelan pompa injeksi & injektor.


9. Teknik Perawatan Dasar Kendaraan : Pengertian, operasi , pembongkaran & perakitan, strategi perawatan, perawatan komponen sistem bahan bakar Mesin Kendaraan.


10. Perawatan Berkala Kendaraan: Harian, mingguan, bulanan, tiga bulanan, enam bulanan, tahunan, dan engine overhaul.


11. Mekanisme Governor : Prinsip kerja governor, penyetelan governor mekanik dan pneumatik


12. Mesin kendaraan berbasis kontrol komputer ( electronic control unit ) : Fuel system, Air induction system, Electronic control module )


13. Starting System & Charging System


14. Pedoman menjalankan Genset : Bahan bakar, minyak pelumas, menjalankan mesin baru, pemeriksaan sebelum menyetart mesin, hal-hal yang harus diperhatikan setelah mesin dapat distart, mematikan mesin, menyetart mesin pada temperatur rendah ( dingin ), menjalankan mesin pada temperatur tinggi.


15. Perawatan Berkala kendaraan : Pelumasan ( bak minyak pelumas, minyak pelumas dari pompa bahan bakar,governor pneumatis, governor mekanis, minyak saringan udara, starter), perawatan sistem pelumasan, perawatan sistem bahan bakar, perawatan sitem udara.


16. Perawatan & Perbaikan Sistem Pendinginan : Radiator,tegangan tali kipas udara,termostat


17. Perawatan & Perbaikan Sistem Listrik : alternator, motor starter, baterai


18. Pengokohan Baut-baut utama : Baut kepala silinder, baut bantalan utama dan pangkal batang penggerak, baut lainnya.


19. Kerusakan, Perbaikan,dan Troubleshooting kendaraan : Kebijakan mencari sumber kerusakan, mesin tidak dapat distart, mesin dapat distart tetapi tiba-tiba mati, mesin dapat distart tetapi tekanan minyak pelumas tidak naik, pada waktu mesin bekerja, tekanan minyak pelumas berkurang, daya mesin berkurang.


20. Knocking (ketukan ) : kemungkinan penyebab kerusakan, dan cara mengatasi


21. Gas buang terlalu tebal : kemungkinan penyebab kerusakan dan perbaikannya.


22. Reparasi Besar ( Engine Overhaul ) : Jangka waktu reparasi besar, hal-hal yang perlu diperiksa ( kepala silinder, katup isap & buang, silinder, piston, cincin torak, bantalan utama poros engkol ).


23. Monitoring Getaran  &  Pelumasan pada Genset

 

ALAT PERAGA YANG DIGUNAKAN :

Mobil Mazda, Mesin Toyota Kijang, Mesin Diesel Komatsu 180 HP, Alat Uji Injektor , Alat uji Pompa Injeksi, Vibrometer, Alat uji Pelumas & Pelumasan.

 

INSTRUKTUR TRAINING :

Ir. M. Munir Fahmi, Dipl.Eng.,MT. dan Tim ( Ketua Laboratorium Fluida, Thermal & Otomotif Politeknik Negeri Bandung  ( Politeknik ITB ))

Ir. M. Munir Fahmi, Dipl.ME, MT. got his master degree from Brawijaya University Malang majoring in Energy Conversion. He is till now becoming lecturer at mechanical engineering Poltek ITB (Polban) and he is head of laboratory of fluid, thermal and otomotive. He teachs frequently for industrial training class for Indonesian companies participants for some topics on mechanical engineering such as Mechanical Rotating Equipment, Operation & Trouble Shooting, Pumps, Primover: Operation, Maintenance & Troubleshooting, Genset, Operation, Maintenance & Trouble Shooting, lubrication, Preventive & Predictive Maintenance, Advance Maintenance Management, Reliability Maintenance Engineering, Operation, Maintenance & Trouble Shooting of Pump & Compressor and etc.

 

TEMPAT TRAINING :

Hotel Jayakarta, Bandung

 

DURASI TRAINING :

5 hari

 

WAKTU TRAINING :

1. 20 – 24 Juni 2011


2. 19 – 23 September 2011

 

HARGA INVESTASI/PESERTA :

1. Rp 7.500.000/peserta (bayar penuh)  atau


2. Rp 7.250.000/peserta (early bird, yang membayar 1 minggu sebelum training)  atau


3. Rp 7.000.000/peserta ( untuk peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

 

FASILITAS UNTUK PESERTA :

1. Modul  Training


2. CD Training berisi materi training


3. Sertifikat


4. ATK: NoteBook dan Ballpoint


5. Jaket atau Rompi atau T-Shirt


6. Tas atau Ransel


7. Foto Training


8. Ruang Training dengan fasilitas full AC dan multimedia


9. Makan siang dan 2 kali coffeebreak


10. Instruktur yang qualified


11. Transportasi untuk peserta dari hotel penginapan peserta ke hotel tempat training PP ( jika minimal jumlah peserta dari 1 perusahaan ada 4 orang)

 

Practical Problem Solving for Maintenance and Engineer

Practical Problem Solving for Maintenance and Engineer

Harris Hotel Tebet / Ibis Arkadia Hotel| Saturday, 30 April 2011| 09.00 AM - 04.00 PM | Rp. 1.350.000,

 

Practical Problem Solving yang ditujukan bagi kalangan maintenance dan engineering adalah suatu adalah suatu pengupasan yang sangat practical tentang penanganan suatu masalah / kerusakan yang terjadi pada suatu mesin industri.

Mesin dalam suatu industri bagaikan sumber penghasil uang (:baca profit) tetapi mesin juga dapat berfungsi sebaliknya yaitu sebagai pengambil uang(:baca rugi) jika tidak ada person yang handal sebagai pengelolanya. Dalam training ini akan dikupas secara practical bagaimana menangani problem yang terjadi pada suatu mesin dengan menggunakan QC 7 Tools sebagai alat untuk mereduksi kerusakan suatu mesin.

Peserta training akan diarahkan untuk dapat menguasai QC 7 Tools sebagai tools untuk problem solving, dapat melakukan observasi secara benar terhadap suatu kerusakan, melakukan analisa kerusakan mesin dengan metode 3-Gen dan 2-Gen, memastikan akar penyebab kerusakan mesin serta penanganannya.

Di akhir training, peserta juga akan diarahkan untuk dapat membuat suatu konsep program maintenance untuk tetap menjaga agar performance mesin tetap di level tinggi serta membuat laporan tentang performance suatu mesin..

 

Sasaran Program :

• Peserta training dapat menghitung efisiensi dari suatu mesin serta produktifitas dari suatu unit mesin / line


• Peserta training dapat menggunakan fungsi QC 7 Tools dalam “Problem Solving” suatu mesin


• Peserta training dapat melakukan observasi suatu kerusakan mesin sehingga didapat akar permasalahan dari kerusakan yang terjadi.


• Peserta training dapat menguasai step-step “Problem Solving” dengan metode 4M (Man, Material, Method, Machine) terhadap kerusakan suatu mesin secara terstruktur, tepat dan benar serta menjamin kerusakan yang sama tidak akan terulang lagi.


• Peserta training dapat menganalisa kerusakan mesin yang terjadi di sebabkan karena “Natural Deterioration” atau “Forced Deterioration”.


• Peserta training dapat menggunakan metode 3-Gen dan 2-Gen untuk mengatasi kerusakan suatu mesin


• Peserta training dapat membuat “Pareto Chart” sebagai sarana untuk mereduksi kerusakan mesin secara menyeluruh


• Peserta training dapat mempelajari kondisi ideal suatu mesin


• Peserta training dapat membuat histogram sebagai sarana untuk mempertahankan “Quality of Product” di level yang tinggi


• Peserta training dapat membuat suatu program maintenance yang handal untuk mempertahankan efisiensi mesin yang tinggi


• Peserta training dapat membuat suatu grafik “Control Chart” untuk mengkontrol kondisi performance mesin agar tetap tinggi


• Peserta training dapat membuat suatu bentuk laporan dalam bentuk grafik tentang performance dan efisiensi mesin

 

Pelatihan Ini Sangat Penting Bagi :

• Teknisi Maintenance / Engineering, Supervisor Maintenance / Engineering, Foreman Maintenance / Engineering, dan lain-lain

 

Method of Training
Training ini disajikan dan disampaikan dalam bentuk

• Diskusi Grup


• Latihan di Kelas


• Study Kasus

 

Course Instructors

Indro Agung Handoko
Beliau telah berkecimpung di dalam dunia industri kurang lebih 15 tahun. Maintenanance dan Produktifitas, 2 hal yang sangat berkaitan dan saling menunjang telah dikembangkan menjadi suatu sinergi yang hebat dalam suatu sistem manufacture.

Sejak tahun 1999 telah mempelajari dan mengetrapkan Konsep TPM dan Kaizen di dalam suatu industri. Kelebihan dan kekurangan dari implementasi TPM dan Kaizen ini telah dikenali dan diketemukan solusinya.

Awal tahun 2003, mendapatkan Sertificate TPM Basic dari Jepang dan disusul dengan penerimaan Sertificate TPM Advance juga dari Jepang pada akhir tahun 2004. Penerimaan sertificate tersebut tidak diperoleh secara teoritis saja tetapi juga dengan implementasi di Lapangan.

Tidak ketinggalan juga, Sertificate Kaizen Basic dan Advance juga telah diperoleh pada tahun 2001 dan 2005.

Berbekal pengalaman yang mendalam dan sertificate yang diperoleh, berbagai macam project telah berhasil dikerjakan dan berhasil dengan sukses. Project tersebut antara lain:

1. Develop / training 25 group TPM dengan masing-masing group beranggotakan 5-8 orang dari tahun 2003 – 2006. Secara overall dengan TPM berhasil menurunkan Break Down rata-rata 15%, bahkan ada yang mencapai 40%.


2. Develop / training 8 group Kaizen dengan masing-masing group beranggotakan 5-8 orang dari tahun 2001 – 2006. Secara overall dengan Kaizen, produktifitas dapat ditingkatkan rata-rata 20%.


3. Presentasi tentang Keberhasilan TPM di Jepang pada tahun 2005.


4. Pada November 2006 mendapat Medali Perak pada ICQCC, suatu konvensi international tentang QCC / SGA. 5. Pada Februari 2007 menjadi pemenang ke-2 dalam lomba Best Practice Competition yang diselenggarakan oleh Omron Head Quarter di Kyoto-Japan.

 

Investasi

• Rp. 950.000,- per participant (Group Price) Min 3 Participants


• Rp. 1.350.000,- per participant (Full Fare Price)


• Rp. 1.100.000,- per participant (Early Bird Price) Lunas 7 Hari Sebelum Training


• Kirim 4 Peserta, Gratis Peserta Ke-5

 

Include

• 1 Kali Makan Siang


• 2 Kali Coffee Break


• Seminar Kit


• Sertifikat


• CD Materi Presentasi Training

Basic Treatment System Refrigeration Heating Ventilating and Air Conditioning (RHVAC)

Basic Treatment System Refrigeration Heating Ventilating and Air Conditioning (RHVAC)

Banana Inn Hotel, Bandung |JUNI 01– 04, 2011 | US$ 880.00/person

INTRODUCTION

RHVAC stands for Refrigeration, Heating, Ventilation and Air Conditioning. Today's RHVAC keep us warm in winter and cool in summer. RHVAC is particularly important in the design of medium to large industrial and office buildings, where humidity and temperature must all be closely regulated whilst maintaining safe and healthy conditions within.

The three functions of heating, ventilation, and air-conditioning are closely interrelated. All seek to provide thermal comfort, acceptable indoor air quality, and reasonable installation, operation, and maintenance costs. RHVAC systems can provide ventilation, reduce air infiltration, and maintain pressure relationships between spaces.

The increasing of capacity and skills of employees in the company is very necessary to improve the efficiency and effectiveness of employees, which can indirectly improve the company's profit. Increasing the skills of technicians to care will improve the ability of handling equipment to work with the optimal.

This training will deliver the material that is intended for employees of the company's maintenance of equipment, field techniques, especially refrigerator and air system

The Objective of  This Training

Expected at the end of the training, each participant can understand the systems, cooling systems and air system.

MATERIAL PROGRAM

1. Refrigeration and air system
   
   
   
   • Cooling techniques and the application system
   
   
   • System work
   
   
   • System component ( Condensor, compressor, evaporator, refrigeran, liquid receiver/ accumulator, sightglass, filter drier, EPR, SPR, etc)
   
   
   • Comfort Air
   
   
   • Air system (Central & Unitary, Multi & Single Zone)
   
   
   • Direct Air System and Package
   
   
   • Chiller
   
   
   • Cooling Tower
   
   
   • Air Distribution System and Ventilation
   
   
   • Heating System and Hot Water Distribution
   
   
   
   


2. Controls and electrical systems on RHVAC
   
   
   
   • Electrical System 1 & 3 Phase
   
   
   • Motor system and electrical control systems RHVAC
   
   
   • Electric control tools on the refrigeration system and Air control:
   
   
   • HLP, thermostat, overload etc
   
   
   
   


3. Basics Installation and Refrigeration systems examination
   
   
   
   • Safety and Health
   
   
   • Basic Continuation and pipe/ tube processing
   
   
   • Installing the system, vacuum, leak testing and refrigerant charging
   
   
   
   


4. Maintenance & Troubleshooting
   
   
   
   • RHVAC Maintenance system
   
   
   • Tracking error and damage analysis on RHVAC system
   
   
   
   


5. Maintenance Practical System and Observation system
   
   
   
   • AC Split system (Practical)
   
   
   • AC Central System (Obervation)
   
   
   • Water Heater System/ Boiler (Practical)
   
   
   • Air distribution System (Observation)
   
   
   
   

INSTRUCTOR

• Ir. Apip Badaruddin, MT


• Ir. Arda Rahardja Lukiotbudi, M. Eng


• Ir. Windy Hermawan Mitrakusuma, MT.


• Ade Suryatman Margana, ST, Dipl. TT. MT.

Apip Badaruddin, ST, MT. He held his master degree in Bandung Institute of Technology (ITB) and has developed his skill and knowledge by following course inside and outside Indonesia, such as Hydrocarbon Refrigeration, Ecozone BV in The Netherlands. His core of competency is in refrigeration and has been practicing it as a lecturer in State Polytechnic of Bandung for more than 14 years. For the last two years, he has been lecturing 1 & 2 Applied Refrigeration. From 1996 until 2006, he also actively participated in a professional activity: Training, Installation, and refinement of Refrigerator machine.

Ir. Windy Hermawan Mitrakusuma, MT. He is a lecturer in State Polytechnic of Bandung, especially in technique refrigeration and air system. He had been following several training such as Course of Innovation in refrigeration and air conditioning: Calorymeter system, data acquisition standardization and calibaration, ecozone-Netherlands. His experience in design and installation of refrigeration is more than 18 (eighteen years).

Ir. Arda Rahardja Lukiotbudi, MEng holds a Master degree in Mechanical Engineering from RMIT, Australia. He joined The State Polytechnic of Bandung in 1987. He is a Lecturer and Head of KBK Refrigeration from 2006 until now on.  The professional training that he has been followed both domestic and overseas are: Thermal Energy Storage Systems in ITB; Hydrocarbon Refrigeration in Ecozone, The Nederlands; Maintenance of Hydrocarbon Refrigeration System in Ecozone, The Nederlands ; Vocational & Technical Teacher Training majoring Refrigeration & Air Conditioning in Hawthorn Institute of Education, Australia; Training in Refrigeration & Air Conditioning for 10 months in Boxhill TAFE College, Australia.

One of his scientific paper results is “Design, Construction and Testing of a Thermosyphon Heat exchanger for Medium Temperature Heat Recovery Application in Bakeries” He is a member of American Society of Heating Refirgeration Air Conditioning Engineers (ASHRAE).

Ir. Ade Suryatman Margana, ST, Dipl. TT. MT held his Diploma Technical Teaching in Hawthorn Institute of Education, Melbourne, Australia, 1987 and also got Certificate of Technology Refrigeration and Air Conditioning from TAFE RMIT, Melbourne, Australia in 1985. In 2000 and 2002, he finished his Bachelor degree from UNISBA and ITB majoring Industrial engineering and also Machinery engineering. In 2010, he completed his Master degree especially in Machinery engineering, UGM.

The professional training that he has been followed such as Maintenance Refrigeration and Air Conditioning system, Ecozone, Netherland; Load Calculation and Maintenance Air Conditioning CARRIER, Singapore.

Other than as a Lecturer in The State Polytechnic of Bandung, he also worked as a Project Leader in PT. Constube Perkasa Manunggal and as Engineering Manager in Amiga Jaya Makmur. He is also a freelance consultant for Mechanical & Electrical System for Pertamina Balongan, Krakatau Steel, Frisian Flag, Pupuk Kujang and B4T Bandung.

Registration Fee:

• Registration Deadline: Mei 25, 2011


• US$ 880.00/person


• US$ 840.00/person for more than 3 (three) participants from 1 Company

Fee includes the following:

• Four-day registration fee for all Training sessions


• Lunch per day


• Daily coffee/tea breaks


• Integrated Quality Training Materials (SOFTCOPY AND HARDCOPY)


• Quality Training Kits


• Convenient Training Facilities


• Certifícate of Compleción

PRACTICAL INTERNAL CORROSION CONTROL AND MONITORING IN OIL & GAS OPERATIONS

PRACTICAL  INTERNAL CORROSION CONTROL AND MONITORING IN OIL & GAS OPERATIONS

Bali | April 5-8, 2011 | IDR 10.750.000,-/ Person

 

Internal Corrosion Problems in Gas, Oil and Produced Water Pipeline and Equipment

• Piping and Pipeline Leakage due to Pitting Corrosion and Microbiological Induced Corrosion


• Severe Pipe Wall Thickness Reduction and Short Remaining Service Life caused by Sour Corrosion


• Pipe Wall, Rotating Parts and Equipment Cracking due to Chloride and Sulfide in the Fluids


• Internal Corrosion of Pipeline and Equipment due to Water in Oil and Oil in Water Emulsions


• Internal Corrosion due to Multi Phase Flow in the Pipeline


• Severe Corrosion Rate caused by CO2 and Hydrate in the Gas Lines, CO2/H2S Removal Unit and Glycol Dehydration Unit


• Internal Corrosion in the Water Lines due to Dissolved Oxygen, Mud and Sludge


• Malfunction of Pump, Compressor, Valves and Equipment due to Under-Deposit Corrosion, Under-Film Corrosion and Fouling

The Nature, Mechanism and Characteristics of Internal Corrosion and the Control Methods

• Anodic-Cathodic Reactions, Electrical Properties and Characteristics of Corrosion Cells


• Physical & Metallurgical Conditions of Metals and Chemical Composition that Promote Corrosion


• Destructive and Catastrophic Effects of Corrosive Agents and Microorganism in the Gas, Oil and Produced Water Fluids


• The Role and Mechanism of O2, CO2, H2S, Dissolved Salts and Microorganism in Internal Corrosion


• The Role of Oilfield Bacteria and the Mechanism of MIC


• Characteristics and Detection of Internal Corrosion in the Pipeline and Surface Equipment


• Removal of Dissolved Corrosive Agents and Non-Hydrocarbon Gases in the Gas, Oil and Produced Water Fluids


• Internal Corrosion Control with On-line Chemical Inhibitors Injection, Surface Barriers and Scavengers

Internal Corrosion Detection and Monitoring  Techniques, Devices and Analysis

• Visual Inspection and Early Detection Techniques & Devices for Monitoring Fluid Corrosiveness and Tests for Identifying Corrosion products


• The Important of Internal Corrosion Rate Monitoring Before and After Chemical Injection and Treatment


• NACE Standard Method for Preparation, Installation, Laboratory Analysis and Interpretation of Results of Internal Corrosion Monitoring


• Access Fittings, Retrievers, Corrosion Coupons, Scale Coupons, Corrosion Probes,  Holders, Injection & Sampling Devices and Instrument for On-line Internal Corrosion Monitoring


• The Use of Nipple or Spool, Hydrogen Probe and Galvanic Probe


• NACE Standard Method for Testing and Analysis of Bacterial Activity and Microbiological Induced Corrosion


• Iron Content Analysis of Produced Water and the COPRA Correlation


• Down-hole Tubing or Casing Calipers, Ultrasonic Wall Thickness Testers and Radiography

Internal Corrosion Control with Chemical Inhibitor Injection, Passive Film Formation and Biocides

• Nature & Classification of Inhibitors and Effect of Ionic Character on


• Inhibiting Ability


• Formulations of Oilfield Inhibitors and the use of Water Soluble Inhibitors, Volatile Inhibitors and Acid Inhibitors


• Typical Corrosion Inhibitors, Scavengers & Biocides for Oil & Gas Field


• Guidelines of Inhibitor and Biocide Applications and the Chemical Injection Equipment for Pipeline and Surface Facility


• Inhibitor and Biocide Batch Treatment Using Pigs, Chemical Dosage and the Pigging Operations


• Surfactant and Cleaners for Solving Fouling Problem in the Equipment and Systems


• Cationic & Mixed Charge Organic Inhibitors for Hydrocarbon and Oxygen Corrosion Inhibitors for Produced Water


• Testing and Evaluation of Inhibitor and Biocide Effectiveness


• Safety Precaution in Working with Inhibitors and Biocides

Internal Corrosion Control as a Key Factor to Pipeline Integrity Management

• Hazard Assessment and Risk Based Inspection for the Pipeline and Equipment Maintenance Program


• Pipeline Internal Damage Record and Wall Thickness Monitoring


• Pigging for Water and Deposit Removal from the Pipeline System


• Controlling of Flow Stability and Corrosion Rate to a Safe Level


• Estimating Present Pipeline Remaining Service Life


• Evaluation of Present Condition and Comparison with Initial Pipeline Design Baseline


• Evaluation and Controlling of Chemical Inhibitor and Biocide Injection by using Corrosion Rate Monitoring Data.


• Evaluation of Pipeline and Equipment Damage in accordance with Root Cause Failure Analysis


• Development of Specific Pipeline Integrity Management System by using Internal Corrosion Rate Monitoring Data

 

Course Leader: Hilman Ahmad

This specially designed course will be conducted by Hilman Ahmad & Associates, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Professional Industrial Oil & Gas Education Center, and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000. He has been delivering training course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

 

Documentation

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner.


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.

 

Dress Code

Casual clothing is recommended. The training atmosphere is informal.

 

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included calculator, T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Convenient training facilities with five star quality


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Local drop and pick up for arrival and departure between airport to hotel.


• Half day city tour at the end of training session following by dinner with entertainment  (optional)


• Exclusive flash disk.

 

Tuition Fee & Registration  Deadline

• IDR 10.750.000,-/ Person


• Registration deadline a weeks before training held.

 

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

LUBRIKASI : Prinsip Dasar dan Aplikasi

LUBRIKASI : Prinsip Dasar dan Aplikasi

Hotel Jayakarta, Bandung |  1 – 3 Maret 2011| Rp 5.500.000/person
Hotel  Jayakarta, Bandung | 20 – 22 Juni 2011| Rp 5.500.000/person
Hotel  Jayakarta, Bandung | 14 – 16 November 2011 | Rp 5.500.000/person

 

SASARAN TRAINING :

• Menambah  wawasan  para  peserta  dalam   memahami   masalah masalah lubrikasi (pelumasan) secara integralistik sehingga para peserta :


• dapat memahami  saling  keterkaitan  antara  parameter parameter kegagalan dengan parameter operasi dan parameter pelumas.


• dapat melakukan antisipasi akibat  yang  mungkin  terjadi dengan adanya perubahan perubahan yang sengaja atau tidak sengaja dilakukan.


• mampu  mengembangkan  diri  sehingga   dapat   memikul tanggung jawab tahap lebih lanjut terkait pelumasan.

 

CAKUPAN MATERI TRAINING

1. Sifat sifat pelumas dan spesifikasinya


2. Standardisasi minyak pelumas


3. Pemilihan pelumas


4. Kemerosotan pelumas


5. Sistem pelumasan pada motor Diesel


6. Sistem Pelumasan pada mesin mesin Turbo


7. Thrust bearing (Kingsbury, Mitchell)


8. Journal bearing


9. Oil cooler


10. 10. Diskusi

 

INSTRUCTOR : Ir. Pawito Merto Sontowiro, Msc.

Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti bidang Coal Energy , Argonne, Chicago, Ill., USA, bidang Combustion, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy.. Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training  untuk banyak perusahaan di Indonesia seperti Chevron Indonesia Company, Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC  SES LTD, PLTGU  BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain.  Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

 

VENUE

HotelJayakarta, Bandung

 

TRAINING DURATION

3 days

 

TRAINING TIME

1. 1 – 3 Maret 2011


2. 20 – 22 Juni 2011


3. 14 – 16 November 2011

 

INVESTATION PRICE/PERSON

1. Rp 5.500.000/person (full fare)  or


2. Rp 5.250.000/person (early bird, payment 1 week before training) or


3. Rp 4.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module


2. Flash Disk contains training material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. T-Shirt


6. Bag


7. Training Photo


8. Training room with Full AC facilities and multimedia


9. Lunch and twice coffeebreak every day of training


10. Qualified Instructor


11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

LUBRICATION AND BEARING TECHNOLOGY

LUBRICATION AND BEARING TECHNOLOGY

Hotel Banana Inn, Bandung | 2 – 6 Mei 2011 | Rp 7.750.000/person
Hotel Banana Inn, Bandung | 26 – 30 September 2011 | Rp 7.750.000/person

LATAR BELAKANG :

Bearing adalah komponen mesin yang mendukung  dan memposisikan  rotor mesin yang bersangkutan pada posisi yang benar. Didukung dengan pelumasan yang tepat, maka

• Rotor berputar dengan alignment yang benar


• Mesin terbebas dari vibrasi yang berlebihan


• Rotor dan stator terhindar dari gesekan yang berlebihan sehingga pasokan daya masih dalam rentang yang  wajar


• Rotor dan stator  terhindar dari keausan yang berlebihan

Dengan kondisi tersebut di atas maka peluang terjadinya kegagalan operasi dapat diperkecil.

 

TUJUAN TRAINING :

Setelah Pelatihan para peserta diharapkan akan lebih :

• Memahami parameter-parameter serta pengaruhnya dalam operasi roller bearing dan pelumas (lubricant)


• Memahami cara-cara melakukan operasi dan perawatan roller bearing yang tepat


• Memahami faktor-faktor penyebab kemerosotan pelumas


• Mampu mencari penyebab kegagalan dan cara penanganannya

 

CAKUPAN MATERI TRAINING :

1.    Fundamental lubrication

• teori gesekan  dan pelumas


• jenis jenis pelumas

2.    Oli

• viskositas


• mengukur viscositas, efek temperatur dan tekanan.

3.    Memilih dan menentukan  viskositas
4.    Additive.

• Unsur unsur additive


• additive pada gearbox, motor bakar.

5.    Grease

• consistency


• NGLI grade


• memilih grease


• additive pada grease


• Aplikasi pelumas untuk pabrik  kertas.

6.    sistem lubrikasi pada pompa.

• sistem  lubrikasi mesin diesel dan alat berat


• sistem lubrikasi pada steam turbine


• sistem lubrikasi pada kompresor


• sistem lubrikasi pada paper machine


• Maintenance total solusi - program lubrikasi

7.    Bagaimana merencanakan program preventive maintenance untuk lubrikasi.

• kerja kelompok : bagai mana membuat planning lubrikasi.

8.    Menentukan interval lubrikasi
9.    Phenomena Vibrasi dan problem yang ditimbulkan oleh pelumas /predictive

• Maintenance


• studi kasus :  analisa vibrasi.


• kerusakan bearing akibat kesalahan lubrikasi.

10.    Problem troubleshooting yang berhubungan dengan pelumas.
11.    keausan pada journal bearing.
12.    kerusakan pada bearing.
13.    kerusakan pada gearbox.
14.    Lube oil analysis.

• Standard oil testing. TAN Number, counting particle, ect.

15.    Reliability improvement on lube oil.
16.    Handling and storage pelumas dan Safety

 

TRAINING INSTRUCTOR

Ir. Deddy Nugraha

Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

 

VENUE :

Hotel Banana Inn, Bandung

 

TRAINING DURATION :

5 days

 

TRAINING TIME  :

1. 2 – 6 Mei 2011


2. 26 – 30 September 2011

 

INVESTATION PRICE/PERSON :

1. Rp 7.750.000/person (full fare)  or


2. Rp 7.500.000/person (early bird, payment 1 week before training) or


3. Rp 7.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

 

 

AC AND REFRIGERATION: SAFETY AND CONTROL SYSTEMS - Yogyakarta

AC AND REFRIGERATION:  SAFETY AND  CONTROL  SYSTEMS

Wisma MM UGM, Yogyakarta | 20 – 23 Desember 2010 | 08.00 – 16.00 WIB | Rp. 4.000.000,-

DESKRIPSI

Memberikan pengetahuan tentang dasar peralatan kontrol dan keamanan pada mesin-mesin pendingin atau mesin refrigerasi. Berbagai macam peralatan dan sistem keamanan dijelaskan secara komprehensif mulai dari pemilihan, prinsip kerja, perawatan, dan penanganan masalah dalam proses pendinginan.

PESERTA :

Teknisi, Engineer, Supervisor yang bekerja pada bidang maintenance di perusahaan.

MATERI

1. Basic Concept of AC & DC.


2. Instalasi dan trouble shooting


3. Perawatan


4. Intro To Load Estimating


5. Load Estimating : Cooling and Heating


6. Load Estimating : System Design


7. Mechanical Refrigeration : Cycle Descrip.


8. Mechanical Refrigeration Cycle Analysis


9. Ducting Design : Principle & Method


10. Fundamental of Psychrometric


11. Psychrometric : Properties of Air ADV.PROG.


12. Refrigerant Piping System


13. Water Piping & Pump Selection


14. Multi Room Buildings,Load CH.SYS.PROG.


15. Ducting Design : Air Side


16. Ducting Design : Centrifugal Fan


17. Ducting Design : Room Air Distribution


18. Cooling Coil Performance


19. Air Handling Unit : Central SYS.


20. Heat Rejection Equipment & Cooling Tower


21. Control Principles & Method.


22. Test Merancang Sistem Tata Udara


23. Centrifugal REF.Equipment


24. Absorption REF.Equipment


25. Reciprocating REF.Equipment


26. Reciprocating Chiller


27. Large Packaged Equipment

INSTRUKTUR :

• Dr. Samsul Kamal


• Ir. Prajitno, M.T.

Waktu

20 – 23 Desember 2010

08.00 – 16.00 WIB

Tempat

Wisma MM UGM Yogyakarta

Biaya

Rp. 4.000.000,- per orang non residential

NOISE CONTROL MANAGEMENT

NOISE CONTROL MANAGEMENT

Hotel Golden Flower, Bandung | 29 November – 2 December 2010 | Rp 7.250.000/person

TRAINING INTRODUCTION :

One possible cause of hearing damages on men is the level of noise exposures that beyond the limit of sound pressure level or percent dose allowed for a normal working hours. Industrial workers who receive noise exposure in their everyday working environment, are vulnerable to experience hearing damage either in the form of temporary (TTS) or permanent threshold shift ((PTS). Therefore, the industry should establish a professional program of noise control management in order to protect the health and safety of the workers.
In association with Indonesian regulation for safety and healthy working condition (PP No. 3 1975), limit of Leq 85 dBA noise exposure level for 8 hours working day is required for work places. Instead, a Leq limit of 90 dBA steady noise levels for 8 hours working day is determined in OSHA regulation (1974) for occupational noise. Higher levels of noise will reduce the allowable exposure time or working period of workers; therefore, a feasible administrative or engineering noise controls should be applied. When employees are subjected to noise exposures exceeding the limit stated in OSHA regulation, personal ear protectors, such as, earplug or earmuff, shall be provided.

TRAINING OBJECTIVES:

1. Learn about noise in industry and the effects of noise to workers
   Learn about noise measurement and analysis techniques including instrumentation


2. Learn how to design, monitor and implementing a management system for preserving health and safety of workers from noise exposure in industry


3. Learn how to design, monitor and implementing noise control engineering in industry

WHO SHOULD ATTEND THIS TRAINING?
Safety, Health and Environmental Manager / Engineer, Power Plant and Process Facility, Process and Design, Maintenance Manager / Superintendent / Engineer, Chief Medical Officer

TRAINING MATERIAL OUTLINE :

1. INTRODUCTION


2. FUNDAMENTALS OF ACOUSTICS
   a. Sound Levels and Decibel Scales
   b. Sound Propagation Outdoors and Indoors
   c. Air and Structure borne Sound Propagations


3. NOISE SOURCES IN INDUSTRY
   a. Fan Noise
   b. Compressor and Pump Noise
   c. Jet Noise
   d. Pipe Flow Noise
   e. Other Noise Sources


4. NOISE MEASUREMENT AND FREQUENCY ANALYSIS
   a. Measurement Methods
   b. Microphones
   c. SLM and Integrating Devices
   d. Time Varying Noise and Spectrum Analysis
   e. Audiometer


5. HEARING CHARACTERISTICS
   a. Hearing Mechanism and Threshold of Hearing
   b. Loudness Levels and Computation
   c. Hearing Loss and Audiometric Test


6. EFFECTS OF NOISE ON HUMAN
   a. Annoyance Levels
   b. Noise Induced Hearing Loss
   c. Noise Dose Calculation


7. NOISE CONTROL TECHNIQUES
   a. Planning a Noise Control Program
   b. Noise Control by Planning and Maintenance
   c. Enclosure and Barriers
   d. Silencers, Mufflers and Attenuators
   e. Noise Control by Room Treatment


8. NOISE CONTROL MANAGEMENT
   a. Priority Planning and Approach
   b. Noise survey and Visual Inspection
   c. Noise Abatement Procedures and Guidelines
   d. Hearing Conservation Program
   e. Noise Control Standards and Regulations


9. TUTORIALS AND PRACTICAL WORKS
   a. Insulation
   b. Noise measurement and frequency analysis
   c. Noise Dose

TRAINING INSTRUCTOR

Dr. Ir. Ida Bagus Ardhana Putra is senior lecturer at Physics Engineering Department Bandung Institute of Tecnology (ITB). Born in Klungkung Bali, 26 January 1951. He was graduate from Physics Engineering ITB 1976. Ph.D from University New South Wales Australia in Acoustics and Noise Control 1990. Head Laboratory Acoustic Physics Engineering Department ITB ( 1996 - now) and President Indonesian Acoustics Vibration Association ( 1997 - now). Senior researcher of Bandung Institute of Technology, Consultant Acoustic and Noise Control PT. IPTN, PT. KHS Bandung and of PT. ELMES Jakarta. Instructor in so many courses and training of LPM ITB. Experienced in giving training of Environmental Noise 2002- now, Noise Control Management 2001 – now

VENUE :

Hotel Golden Flower, Bandung

TRAINING DURATION :

4 days

TRAINING TIME :

29 November – 2 December 2010

INVESTATION PRICE/ PERSON :

1. Rp 7.250.000/person (full fare)  or


2. Rp 7.000.000/person (early bird, payment before 22 November 2010) or


3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified and experienced instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)