PRACTICAL ASPECT OF ARTIFIAL LIFT METHODS FOR PETROLEUM PRODUCTION SYSTEM

PRACTICAL ASPECT OF ARTIFIAL LIFT METHODS FOR PETROLEUM PRODUCTION SYSTEM

Hotel Golden Flower Bandung | 18 – 22 Oktober 2010| Rp 7.450.000/person

 

SASARAN TRAINING :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

• Memahami prinsip-prinsip dasar perhitungan reservoir minyak bumi yang berhubungan dengan penggunaan gas-lift, sucker-rod, electric submersible, hydraulic dan jet pump.


• Melakukan diagnosis sederhana dan memengerti pengelolaan data sumuran minyak yang diproduksi dengan, gas lift, sucker rod pumping, electric submersible, hydraulic dan jet pump.


• Membuat analisis sederhana terhadap data sumuran minyak, melakukan perhitungan-perhitungan kinerja sumuran sebagai hasil dari pemompaan dengan berbagai metoda sesuai dengan keadaan reservoirnya.


• Melakukan perhitungan-perhitungan kuantitatip sederhana dan melakukan optimisasi produksi untuk sumuran minyak yang diproduksi dengan gas lift, sucker rod pumping, electric submersible, hydraulic dan jet pump sesuai dengan batasan operasinya.

 

PRE-REQUISITE :

• Latar belakang  : Operator/Sr. Operator/ Jr.Engineer/Engineer

 

CAKUPAN MATERI TRAINING :

1. SISTEM PRODUKSI LAPANGAN MINYAK BUMI
   
   
   1. Sistem Produksi Alamiah
   
   
   2. Sistem Produksi Dengan Pengangkatan Buatan
   
   


2. GAS LIFT
   
   
   1. Pendahuluan
   
   
   2. Gas Lift Continu dan Intermittent
   
   
   3. Komponen Alat Utama Gas Lift
   
   
   4. IPR dan Perancangan Gas Lift
   
   
   5. Optimisasii dan Alokasi Gas untuk Gaslift
   
   
   6. Sistem Produksi Dengan Pengangkatan Buatan oleh Gas Lift
   
   


3. SUCKER ROD PUMP
   
   
   1. Pendahuluan
   
   
   2. Pump Intake Curve
   
   
   3. Optimisasi Produksi
   
   
   4. Rancangan Sucker Rod Pump API RP11L
   
   
   5. Komponen Alat Utama
   
   
   6. Faktor-faktor yang mempengaruhi gerakan rod
   
   
   7. Perencanaan pompa
   
   
   8. Dynagraph & Dynamometer
   
   


4. PCV (PROGRESSIVE CAVITY PUMP)
   
   
   1. Pendahuluan
   
   
   2. Deskripsi Peralatan
   
   
   3. Elastomer
   
   
   4. Perancangan
   
   


5. ELECTRIC SUBMERSIBLE PUMP
   
   
   1. Pendahuluan
   
   
   2. Dasar-dasar perhitungan ESP
   
   
   3. Konstruksi ESP
   
   
   4. Karakteristik pompa SRP
   
   
   5. Cara Memilih jenis pompa
   
   
   6. Aplikasi di Lapangan
   
   


6. POMPA HIDRAULIK
   
   
   1. Alat-alat permukaan
   
   
   2. Jenis-jenis unit pompa
   
   
   3. Jenis-jenis unit pompa
   
   
   4. Ukuran pompa
   
   
   5. Langkah-langkah pada pemilihan pompa hidraulik
   
   


7. POMPA JET
   
   
   1. Pendahuluan
   
   
   2. Persoalan gas
   
   
   3. Ukuran Nozzle dan throat
   
   
   4. Langkah-langkah pada perhitungan Jet pump
   
   
   5. Grafik Kelakuan pompa
   
   
   6. Menggunakan program mesin hitung
   
   
   7. Hasil lapangan
   
   

 

INSTRUKTUR :

Ir. Sudiharto, MT. and Team

Ir. Sudiharto, MT,  is alumnus from Bandung Institute of Technology (ITB) department of petroleum engineering. Ir. Sudiharto besides as instructor and researcher at Geothermal Laboratory ITB, he is also being as Production Engineer at LAPI ITB, Production & Reservoir Analist and  expert board (Dewan Pakar) at Forum Komunikasi Daerah Penghasil Migas, and joining in Community Development Team Dirjen Migas since 2003.

Some projects have been handled by him such as policy analysis expert on oil and gas subsector, oil and gas production expert, and field economicity such as: projection study investation potency energy and mineral resources, implementation study national energy consumtion, study on field use of Brownfield in Indonesia, inventarization research of old well potential in regency of Muaro Jambi,  blueprint arrangement manpower on oil and gas subsector, development operation cost estimation system oil and gas: geological and geophysical stage, study of combustion flare gas at PERTAMINA DOH Jawa Bagian Barat, survey and development of GIS based datas for planning and distribution BBM  and transportation gas through pipe, study on planning of Indonesia – Asean pipeline system, etc. Ir. Sudiharto have trained for training class for many companies in Indonesia. Some topics that have been frequently delivered by him as follows :

1. Electric Submercible Pump, Problem and Trouble Shooting Mecanism


2. Crude Oil Analysis


3. Drilling, Production and Workover Strategy


4. Well Workover and Completion Stretegy


5. Petroleum Finance, Acconting and Reservoir Management


6. Plan of Development in Oil and Gas Industries


7. Pressure Control for Drilling Engineer


8. Plan of Development (POD) & Authorization For Expenditures (AFE)


9. Management Skills Secretary Petroleum Gas and Oil Industries


10. Pressure Transient Analysis and Well Testing Data Interpretation


11. Oil Production System and Operation


12. Formation Damaged and Well Stimulation


13. Simulasi Reservoir for Petroleum Engineer


14. Oil and gas transportation/measurement, etc

 

TEMPAT TRAINING :

Hotel Golden Flower Bandung

 

DURASI TRAINING :

5 days

 

WAKTU TRAINING :

18 – 22 Oktober 2010

 

HARGA INVESTASI/PESERTA :

1. Rp 7.450.000/person (full fare)  or


2. Rp 7.250.000/person (early bird, payment before 11 October 2010) or


3. Rp 6.950.000/person (if there are 3 persons or more from the same company)

 

FASILITAS UNTUK PESERTA :

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

 

MODELING & SIMULATION FOR PRACTICAL INDUSTRIAL PROCESS CONTROL

MODELING & SIMULATION FOR PRACTICAL INDUSTRIAL PROCESS CONTROL

Hotel Golden Flower Bandung | 18 – 20 October 2010 | Rp 5.450.000/person

INTRODUCTION:

Practical industrial process control system implemented in industry is digital based processing system. Algorithm is run in computer system, can be PLC, DCS or other controller system device. Mathematical formulas are used to implement control strategies. Mathematical tools are important to study and to know more about the process, the control and the system overall. This training is designed to give participants the knowledge and horizons on process modeling & simulating its using appropriate software. By following this training, participants will know everythings beyond the hardware and under the desk.

TRAINING OBJECTIVE:

1.    To know the fundamental of modeling and simulation for practical industrial process control
2.    To know the modeling concept and the importance in the real application
3.    To know how the process of modeling
4.    To know the simulation concept and practicality aspect
5.    To be able to practice

TRAINING MATERIAL OUTLINE :

1.    Introduction to Industrial Process Control system
2.    Introduction to modeling & simulation
3.    Differential equation for modeling & simulation
4.    State space for modeling & simulation
5.    Models for systems & signals
6.    Physical modeling & practice
7.    System identification & practice
8.    Model used in control system implementation
9.    Model simulation(using matlab,simulink, hysys, DCS or PLC software simulation)
10.    Cases study and discussion

TRAINING INSTRUCTOR

Dr.Ir. Edi Leksono, M.Eng. and team
DR. Ir. Edi Leksono, M.Eng. is alumnus from Physics Engineering Bandung Institute of Technology, ITB (Bachelor), Control Engineering Tokyo Institute of Technology Japan(Master), and Electrical engineering Keio University Japan. Now Dr. Edi Leksono is a senior professor at Engineering Physics ITB. He have been interacting with industry for more than 25 years for training, consultancy and project implementation in field of SCADA, PLC, DCS, Instrumentation and Process Control and also energy saving. He have taught most of companies in Indonesia for many topics related to his competencies and he has implemented real project in field for many companies in Indonesia. In his expertise in ITB, he have dedicated much scientific work, such as writing or translating text book, being researcher and publish to journal and being speaker in national and international conference.

 

VENUE :

Hotel Golden Flower Bandung

TRAINING DURATION :

3 days

TRAINING TIME  :

18 – 20 October 2010

 

INVESTATION PRICE/PERSON :
1.    Rp 5.450.000/person (full fare)  or
2.    Rp 5.250.000/person (early bird, payment before 11 October 2010) or
3.    Rp 4.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD contains training material


3. For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by PT.MMS team / instructor


4. Certificate


5. Stationeries: NoteBook and Ballpoint


6. Jacket or waistcoat or T-Shirt


7. Bag or backpackers


8. Training Photo


9. Training room with full AC facilities and multimedia


10. Once lunch and twice coffeebreak every day of training


11. Qualified  instructor


12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

RECOMMENDATION FOR PARTICIPANTS:

For practice session: each participant is recommended to bring notebook/laptop for softwares installation and practice session

ANALOG INSTRUMENT

ANALOG INSTRUMENT

Hotel Golden Flower Bandung | 11 – 13 October 2010 | Rp 5.450.000/person

TUJUAN PELATIHAN :

Pelatihan ini dimaksudkan untuk memberikan penjelasan, pengetahuan, dan keterampilan tentang instrumentasi dan kalibrasi yang merupakan suatu pengetahuan teknis yang banyak digunakan industri termasuk industri minyak dan gas, serta manufaktur. Pelatihan ini memberikan gambaran dasar, definisi, standar, dasar-dasar perancangan, aplikasi, dasar-dasar perawatan dan perbaikan, serta teknik-teknik kalibrasi instrumen.

 

TRAINING MATERIAL OUTLINE :

1. Introduction to instrumentation


2. analog Insrument


3. digital Instrument


4. Sensor and transducers(pressure, flow, temperature, level, force)


5. Transmitter and instrumentation signal(pneumatic and electronic)


6. Teknik kendali otomatis


7. Karakteristik pengendalian


8. controller Tuning


9. Signal conditioner


10. Signal processing


11. Calibration(transducers, transmitter, controller)


12. Electronic test equipment


13. Teknik perawatan dan perbaikan instrument


14. Diskusi

WHO SHOULD ATTEND?

Pelatihan ini diberikan kepada para operator, teknisi, engineer, supervisor, dan lainnya yang ingin mengetahui/memahami/mendalami dasar-dasar, instrumentasi dan teknik kalibrasi, penggunaan instrumen, serta teknik perawatan dan perbaikan instrumen.

 

TRAINING INSTRUCTOR

Dr.Ir. Edi Leksono, M.Eng. and team
DR. Ir. Edi Leksono, M.Eng. is alumnus from Physics Engineering Bandung Institute of Technology, ITB (Bachelor), Control Engineering Tokyo Institute of Technology Japan(Master), and Electrical engineering Keio University Japan. Now Dr. Edi Leksono is a senior professor at Engineering Physics ITB. He have been interacting with industry for more than 25 years for training, consultancy and project implementation in field of SCADA, PLC, DCS, Instrumentation and Process Control and also energy saving. He have taught most of companies in Indonesia for many topics related to his competencies and he has implemented real project in field for many companies in Indonesia. In his expertise in ITB, he have dedicated much scientific work, such as writing or translating text book, being researcher and publish to journal and being speaker in national and international conference.

 

VENUE :

Hotel Golden Flower Bandung

 

TRAINING DURATION :

3 days

TRAINING TIME  :

11 – 13 October 2010

 

INVESTATION PRICE/PERSON :
1.    Rp 5.450.000/person (full fare)  or
2.    Rp 5.250.000/person (early bird, payment before 4 October 2010) or
3.    Rp 4.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD contains training material


3. For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by PT.MMS team / instructor


4. Certificate


5. Stationeries: NoteBook and Ballpoint


6. Jacket or waistcoat or T-Shirt


7. Bag or backpackers


8. Training Photo


9. Training room with full AC facilities and multimedia


10. Once lunch and twice coffeebreak every day of training


11. Qualified  instructor


12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

RECOMMENDATION FOR PARTICIPANTS:

For practice session: each participant is recommended to bring notebook/laptop for softwares installation and practice session

 

ANALISIS PONDASI TIANG DENGAN PROGRAM APILEplus

ANALISIS PONDASI TIANG DENGAN PROGRAM APILEplus

Hotel Grand Seriti Boutique Bandung | 18 – 19 October 2010 | Rp 3.500.000/person

PENGANTAR :

Program APILEplus  dikembangkan berdasarkan sistem operasi Windows. Program APILEplus dapat digunakan untuk mengetahui respon sebuah pondasi tiang yang dibebani aksial sepanjang kedalaman tiang secara inkremental, antara lain :

• Skin friction sepanjang tiang


• Tahanan ujung tiang


• Kapasitas total tiang


• Distribusi beban


• Settlement

 

CAKUPAN MATERI TRAINING :

1. Pendahuluan
   
   
   
   • a.    Mengenal perangkat lunak SLOPE/W
   
   
   
   


2. Contoh kasus stabilitas lereng


3. Definisi kasus
   
   
   
   • a.    Menentukan area kerja
   
   
   • b.    Menentukan skala
   
   
   • c.    Menentukan spasi grid
   
   
   • d.    Menyimpan file
   
   
   • e.    Zoom
   
   
   • f.    Sketsa geometri kasus
   
   
   • g.    Menentukan metode analisis
   
   
   • h.    Mengatur pilihan analisis
   
   
   • i.    Parameter tanah
   
   
   • j.    Menggambar lapisan tanah
   
   
   • k.    Menggambar piezometric line
   
   
   • l.    Menggambar jari-jari bidang runtuh
   
   
   • m.    Menggambar grid bidang runtuh
   
   
   • n.    Mengatur tampilan
   
   
   • o.    Menampilkan garis koordinat
   
   
   • p.    Menampilkan teks
   
   
   • q.    Verifikasi kasus
   
   
   • r.    Menampilkan parameter tanah
   
   
   • s.    Indentifikasi kasus
   
   
   • t.    Menyimpan kasus
   
   
   
   


4. Solusi (penghitungan)
   
   
   
   • a.    Memulai penghitungan
   
   
   • b.    Selesai penghitungan
   
   
   
   


5. Melihat hasil penghitungan
   
   
   
   • a.    Melihat bidang runtuh
   
   
   • b.    Melihat metode analisis
   
   
   • c.    Menampilkan gaya pada irisan
   
   
   • d.    Menampilkan kontur angka keamanan
   
   
   • e.    Menampilkan nilai kontur
   
   
   • f.    Mencetak gambar
   
   
   
   


6. Latihan/praktek


7. Diskusi

 

INSTRUCTOR :

Dr.Ir. Mardiana (Dosen Teknik Sipil Poltek ITB/POLBAN )

 

VENUE :

Hotel Grand Seriti Boutique Bandung

TRAINING DURATION :

2 days

TRAINING TIME :

18 – 19 October 2010

 

INVESTATION PRICE/PERSON :
1.    Rp 3.500.000/person (full fare)  or
2.    Rp 3.250.000/person (early bird, payment before 11 October 2010) or
3.    Rp 2.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD contains training material


3. For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by PT.MMS team / instructor


4. Certificate


5. Stationeries: NoteBook and Ballpoint


6. Jacket or waistcoat or T-Shirt


7. Bag or backpackers


8. Training Photo


9. Training room with full AC facilities and multimedia


10. Once lunch and twice coffeebreak every day of training


11. Qualified  instructor


12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

RECOMMENDATION FOR PARTICIPANTS:

For practice session: each participant is recommended to bring notebook/laptop for softwares installation and practice session

 

PEMINDAHAN TANAH MEKANIS

PEMINDAHAN TANAH MEKANIS

Hotel Golden Flower Bandung | 11 – 13 Oktober 2010 | Rp 5.450.000,-

 

TRAINING MATERIAL OUTLINE :

1. Alat-alat Pemindahan Tanah mekanis


2. Land Clearing


3. Pemuatan


4. Pengangkutan


5. Dumping

 

INSTRUKTUR TRAINING

Ir. A. M. Ulum A. Gani, M.Sc. ,who is graduated from Geofisika Tambang ITB Bandung, was born in Watan Soppeng, 18 December 1949, he is peneliti utama at Pusat Penelitian Geoteknologi Lembaga Ilmu Pengetahuan Indonesia (LIPI). 1990 – 1993 he was becoming head of  Laboratorium Eksplorasi Mineral, Balitbang Mineral, Puslitbang Geoteknologi, Lembaga Ilmu Pengetahuan Indonesia (LIPI), and 1993-1997 he was becoming head of Laboratorium Pemanfaatan Bitumen, Puslitbang Geoteknologi –LIPI Bandung. He is lecturer at Sekolah Tinggi Teknologi Mineral Indonesia (STTMI) Bandung since 1991-now and becoming head of department at Teknik Pertambangan, Sekolah Tinggi Teknologi Mineral Indonesia (STTMI) Bandung. He has performed many seminars related to his expertise.  Ir.A.M.Ulum A. Gani, M.Sc. has researched and published the results numerous number. At campus Sekolah Tinggi Teknolgi Mineral Indonesia (STTMI) Bandung he teachs for several subjects as follows Pengantar Teknologi Mineral, Bahan Galian Industri, Pembukaan Tambang bawah Tanah, Ventilasi Tambang, Seminar Tambang, and Kerja Praktek. His this much real experiences will be shared with participants in training class.

 

VENUE :

Hotel Golden Flower Bandung

 

TRAINING DURATION :

3 days

 

TRAINING TIME :

11 – 13 Oktober 2010

 

INVESTATION PRICE/PERSON :

1. Rp 5.450.000/person (full fare)  or


2. Rp 5.250.000/person (early bird, payment before 4 October 2010) or


3. Rp 4.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

 

BASIC VSAT SYSTEM

BASIC VSAT SYSTEM

Hotel Golden Flower Bandung | 18 – 20 Oktober 2010 |   Rp 5.250.000/peserta

 

TRAINING OBJECTIVE :

1.    Desain, membuat, mengkonfigurasi dan memanage sistem VSAT
2.    Peserta dapat menghitung link budget sistem VSAT
3.    Melakukan site survey menggunakan GPS dan menginstalasi
4.    Peserta dapat mengoptimasi dan melakukan troubleshooting

 

WHO SHOULD ATTEND THIS TRAINING?

Peserta adalah yang bertanggung jawab atau terlibat dalam desain, konfigurasi atau troubleshooting sistem VSAT, seperti technical support, engineer, dan administrator jaringan VSAT, atau pihak-pihak yang perlu memahami tentang VSAT.

 

TRAINING MATERIAL OUTLINE :

1. Dasar Komunikasi Satelit
   
   
   
   • a.    Pendahuluan Satelit dan cara kerja
   
   
   • b.    Transmisi satelit
   
   
   • c.    Kelebihan dan kekurangan satelit
   
   
   • d.    Bandwidth dan satuan
   
   
   • e.    Polarisasi, LNA/LNB/LNC dan Modulasi
   
   
   • f.    Digital Video Broadcasting
   
   
   • g.    Unjuk kerja dan kualitas link
   
   
   
   


2. Teknologi VSAT
   
   
   
   • a.    Persiapan Instalasi VSAT
   
   
   • b.    Site Survey
   
   
   • c.    Interface Data
   
   
   • d.    Link Budget Sistem VSAT
   
   
   • e.    Pengukuran kualitas sinyal
   
   
   • f.    Grounding dan anti petir
   
   
   • g.    Preventive maintenance
   
   
   • h.    Troubleshooting
   
   
   
   

 

TRAINING INSTRUCTOR

Dr. Ir. Ian Josef Matheus Edward, MT

Dr. Ir. Ian Josef Matheus Edward, MT adalah praktisi IT semenjak tahun 1993, seorang dosen Teknik Elektro ITB yang menamatkan gelar Doktornya di Manajemen Telekomunikasi Teknik Elektro Universitas Indonesia. Beliau juga seorang Project Manager riset bersama pengembangan system radio non line of sight untuk daerah rural RDC Telkom, Project Manager Konsultasi radio Trunking untuk Oil Company, Team Wind Energy, Telemetry and Telecommunication Systems – International Project, Dubai dan India juga Team Telecommunication System Project Laos. Beliau adalah penanggung jawab pelatihan IT Untuk Pertamina, Bank Indonesia, BRI dan Exelcomindo.

 

VENUE :

Hotel Golden Flower Bandung

TRAINING DURATION :

3 days

TRAINING TIME  :

18 – 20 Oktober 2010

 

INVESTATION PRICE/PERSON :

• Rp 5.250.000/peserta (bayar penuh)  atau


• Rp 5.000.000/peserta (early bird, yang membayar sebelum 11 Oktober 2010)  atau


• Rp 4.750.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD contains training material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or waistcoat or T-Shirt


6. Bag or backpackers


7. Training Photo


8. Training room with full AC facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified instructor


11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

WORKLOAD ANALYSIS DI MANUFACTURING (Manhourunit)

WORKLOAD ANALYSIS DI MANUFACTURING (Manhourunit)

Hotel / Office Building Jakarta | 23 Oktober 2010 | Rp. 2.000.000,-/ peserta

 

Tujuan dan Manfaat Pelatihan

Pembuatan standarisasi Workload / beban kerja tiap process di manufacturing sehingga dapat menentukan jumlah Man Power yang diperlukan.

 

Materi

1. Workload analysis Konsep ( Man Hour/ unit production )


2. Games Workload analysis with Slim Posture


3. Analysis Games by Workload analysis


4. Workload  VS  Man Power Planning VS Production

 

Durasi

Lama Pelatihan adalah 8 jam/ 1 hari

 

Waktu dan Lokasi

Tanggal :  23 Oktober 2010 di Hotel / Office Building Jakarta

 

Investasi

• Rp. 2.000.000,-/ peserta


• Rp. 5.250.000,-/ 3 peserta (dari perusahaan yg sama)


• Rp. 7.500.000,-/ 5 peserta (dari perusahaan yg sama)


• (sudah termasuk Coffee Break + Lunch, modul dan sertifikat)


• Early Bird sebelum 09 Oktober 2010 hanya Bayar Rp. 1.500.000,-


• Special Bonus : (CD Audio Relax and Recharge) + Souvenir MTC

 

Metode Pelatihan

1. Pemaparan materi menggunakan  modul yang disesuaikan dengan output/ tujuan pelatihan ini.


2. Penyampaian materi diberikan dengan metode pengalaman, sehingga dapat sesuai dengan kondisi lingkungan kerja di perusahaan Anda.


3. Pemaparan materi menggunakan media Visual, Auditory, dan Kinestethic peserta.


4. Penyampaian materi selalu dibawakan dengan pendekatan Spiritual dan Emotional.


5. Penyampaian materi untuk menciptakan persepsi baru yang dapat  merubah mindset dan pemahaman peserta pelatihan.

Games, Role Play, Group Discussion, Case Study, Simulation, Assignment

 

Peserta

Manager, Supervisor , Staff  Produksi,  Maintenance, Engineering, dll.

 

Fasilitator

Ir Clemens N Bunawan,. MM

Seorang Praktisi system TPM  & TQM untuk Manufacturing & Administrasi, adalah praktisi professional yang memfokuskan diri pada bidang Productivity & Quality Management. Beliau  pernah menjadi Pembicara Tamu pada beberapa Consultan training yaitu di PQM Consultan,  Synergi Consultan, Butomo Consultan, dan Prima Daya Consultan, sedangkan Saat ini sebagai  Assosiate trainer di MTC - LP3I. Adapun bidang training  yang dilakukan adalah QCC / GKM , 7 tools QC , SQC , TPS, TPM , 5R / 5S , Safety , Problem Solving Efective , PM Analysis, Supervisor Roles.  Beberapa Klien yang pernah dilakukan training  antara lain : PT. INCO ASKO, PT. Bakrie Tosanjaya, PT. AICA , PT. Semi Conductor, PT Profilindo, PT. Astra Int., PT. Chuhatsu .

 

Susunan Acara

08.30 - 09.00    Pendaftaran dan registrasi peserta

09.00 - 10.30    Materi/ Sesi I

10.30 - 10.45     Rehat

10.45 - 12.00     Materi/ Sesi II

12.00 - 13.00    Rehat - makan siang

13.00 - 15.00    Unit assesment dan presentasi kelompok

15.00 - 15.15     Rehat

15.15 - 16.30     Evaluasi presentasi kelompok.

16.30                    Penutupan acara hari