PELATIHAN & SERTIFIKASI OPERATOR FORKLIFT - Sertifikat Depnaker

PELATIHAN & SERTIFIKASI OPERATOR FORKLIFT (ref : PER.05/MEN/1985)
Balai Air Bersih, Bekasi |09 s.d 12 Mei 2011 | 08.00 – 16.00 | Rp 2.000.000,-
Balai Air Bersih, Bekasi |06 s.d 09  Juni 2011 | 08.00 – 16.00 | Rp 2.000.000,-
Balai Air Bersih, Bekasi |04 s.d 07 Juli  2011 | 08.00 – 16.00 | Rp 2.000.000,-
Balai Air Bersih, Bekasi |12  s.d 15 September 2011 | 08.00 – 16.00 | Rp 2.000.000,-
Balai Air Bersih, Bekasi |10 s.d 13 Oktober  2011 | 08.00 – 16.00 | Rp 2.000.000,-
Balai Air Bersih, Bekasi |14 s.d 17 November 2011 | 08.00 – 16.00 | Rp 2.000.000,-
Balai Air Bersih, Bekasi |12 s.d 15  Desember  2011 | 08.00 – 16.00 | Rp 2.000.000,-

Pendahuluan

Terselenggaranya kegiatan operasi perusahaan yang aman dan selamat adalah dambaan semua orang, baik itu pengusaha, karyawan maupun keluarga, hal tersebut dapat diraih bukan dengan cara yang mudah tapi harus diusahakan dengan sungguh – sungguh, penuh perjuangan dan disiplin yang tinggi.

Salah satu potensi kecelakaan yang mungkin timbul di tempat kerja adalah forklift, sebagai alat angkut untuk memindahkan barang – barang harus dikemudikan oleh operator yang terlatih. Terlatih dapat dicapai melalui pelatihan – pelatihan yang menyangkut teori dan praktek yang diselenggarakan secara berkesinambungan dan dibimbing oleh pelatih atau instruktur yang berpengalaman. Untuk itu, Kami bekerja sama dengan Departemen Tenaga Kerja akan menyelenggarakan pelatihan operator forklift.

 

Maksud & Tujuan

Dalam rangka meningkatkan keterampilan para operator forklift dan memenuhi syarat – syarat sesuai dengan UU Keselamatan kerja.

 

Scope & Lingkup

Para pekerja yang karena tugas kesehariannya mengemudikan forklift atau para pengawas yang bertanggung jawab bagi kelancaran operasional forklift.

 

Materi Pelatihan

1. UU No. 1 Tahun 1970 Tentang Keselamatan Kerja


2. Permenaker  No. 5 Tahun 1985 Tentang Pesawat Angkat & Angkut


3. Pengetahuan Dasar Forklift


4. Pengetahuan Safety Device


5. Sistem Pengendalian & Cara Pelayanan Pesawat Forklift


6. Sistem Penggerak Pesawat Forklift


7. Sistem Hydraulic Pesawat Forklift


8. Perawatan & Pemeliharaan Pesawat Forklift


9. Memperkirakan Berat Beban Aman Pesawat Forklift


10. Pemeriksaan & Pengujian Pesawat Forklift

Instruktur

Para pengawas dari Departemen Tenaga Kerja RI yang telah berpengalaman.

 

Tanggal & Tempat Pelatihan

Tanggal :

• 09 s.d 12 Mei 2011


• 06 s.d 09  Juni 2011


• 04 s.d 07 Juli  2011


• 12  s.d 15 September 2011


• 10 s.d 13 Oktober  2011


• 14 s.d 17 November 2011


• 12 s.d 15  Desember  2011

Jam  :

08.00 – 16.00

 

Tempat :

Balai Air Bersih Bekasi

Jl. Chairil Anwar  No. 1, Margahyu -  Bekasi Timur

 

Biaya Pelatihan

• Rp 2.000.000,- (Dua Juta Rupiah)


• Biaya diatas sudah termasuk Fee Instruktur Class Room dan lapangan, Penggandaan materi, Training kit, 2X Coffee Break, Lunch, SIO  (Surat Ijin Operasi), Sertifikat dan Buku Kerja dari Departemen Tenaga Kerja.


• Tidak termasuk pajak – pajak.

 

CATHODIC PROTECTION FOR MINE STEEL STRUCTURE AND MINING SUPORTING FACILITIES

CATHODIC PROTECTION FOR MINE STEEL STRUCTURE AND MINING SUPORTING FACILITIES

Bogor | January  11 - 14, 2011 |  Rp. 8.750.000

Designed for

• Mining personnel who concern and responsible for maintenance of steel structures and mining supporting facilities in the mining workplace.


• Anyone who needs to recognize corrosion hazards in the workplace and understand its devastating potential, especially as it relates to his or her area of responsibility, in any mining activity.


• Anyone who needs to understand the engineering concept of corrosion control in the mining site and the benefit of steel corrosion control with cathodic protection technique.


• Those who involves in asset management, and responsible for reliability of mining supporting facilities such as field transportation vehicle, ship and barges, jetty, steel piles, bridges, fuel storage tanks, fuel and water transportation pipeline, mining waste disposal pipeline, and any other steel structure in the mining site.


• Anyone who involves in health, safety, and environment.


• Other beginners who interested in.

 

Description

• The mine steel structures and the mining supporting facilities are naturally subject to failure cause by corrosion hazards, and potentially affect health, safety and environment. These may result in wasting of steel component, slowing down the mining operation, increasing maintenance and repair cost, loss of asset, loss of production, and sudden failure and injury.


• The steel structure include the main mining equipment; and the supporting facilities are field transportation vehicle, ship and barges, jetty, steel piles, bridges, fuel storage tanks, fuel and water transportation pipeline, mining waste disposal pipeline, and any other steel structure in the mining site.


• The corrosion damage can only be prevented and totally stopped by application of cathodic protection.


• The course focuses on recognition and identification of corrosion hazards, its potential damage to steel structures in the mining field, the risk of equipment failure, injury, and the negative effects to safety and environment; and the principle method and techniques to prevent or control corrosion damage with cathodic protection.


• Sacrificial Anode Cathodic Protection (SACP) method and Impressed Current Cathodic Protection (ICCP) method will be explained in detail, both for inland (topside) mining steel structures and underwater or water-immersed mining supporting facilities.


• It provides a basic but thorough review of corrosion characteristics and its devastating mechanism, cathodic protection principle and method, and the technique by which cathodic protection can be applied. Active participation is encouraged through case studies, examples, and an open discussion format.

 

Highlights - Course Content

• Corrosion mechanism of mining steel structure and mining supporting facilities.


• Atmospheric, soil and water corrosiveness.


• Standard and recommended practice for application of anti-corrosion method and materials; and consideration for the use of cathodic protection.


• Practical methods to prevent atmospheric topside corrosion.


• Cathodic protection for fuel, chemicals, and water storage tanks, silos, piping, structures, and its associated equipment.


• Cathodic protection for underground pipeline, structures, and its associated equipment.


• Cathodic protection for underwater pipeline and structures, ships, barges, jetty, steel piles, bridges, fuel and water transportation pipeline, waste disposal pipeline, and marine facilities.


• Design and installation of SACP and ICCP.


• Inspection, monitoring, maintenance and evaluation of SACP and ICCP.


• Hazards and Safety in using Cathodic Protection System.

 

Training Method, Materials and Program

• The course will be delivered in the form of classroom exposition, case studies and open discussion. Course materials will be handed out as hard and soft copy.


• The course will be given in Bahasa Indonesia.  In special case, upon request, it will be in English.


• Actual field problems, which are about to bring to the course, will be presented and discussed in the class and shared to find recommendation as a specific solution. All participant documents should be treated as confidential.


• Course itinerary, materials and program will be provided and prepared by the organizer.

 

About Instructor

Ir. Hilman Ahmad, DEC.

Hilman Ahmad & Associates is an independent consultant in mining, and oil & gas industry, who manage the Education Center for Professionals. The Director himself has been practicing production operation, safety, and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan, for production facility, design & construction, and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center, Brighton, UK, for integrity on-line corrosion monitoring development in 2000. He has been delivering consultative course in production operation, maintenance, safety, and corrosion control for personnel from oil & gas mining company and petrochemical industry since 1979.

 

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

 

Documentation

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

 

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included calculator, T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Convenient training facilities with five star quality


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Local drop and pick up for arrival and departure between airport to hotel.


• Half day city tour at the end of training session following by dinner with entertainment  (Optional)


• Exclusive flash disk.

 

Tuition Fee & Registration  Deadline

• Rp. 8.750.000


• Discount 10 % if register three or more persons from one company.


• Registration deadline a weeks before training held.

 

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

GPS(Global Positioning System) for mining and Petroleum: Principles, equipment, data collecting, data processing, and Application

GPS (Global Positioning System) for mining and Petroleum: Principles, equipment, data collecting, data processing, and Application

Hotel Golden Flower Bandung | 1 – 5 November 2010 | Rp 7.450.000/peserta

SASARAN PELATIHAN :

1. peserta dapat mengetahui system koordinat dan referensi yang digunakan dalam GPS dan hubungannya dengan system koordinat pada proyeksi peta (seperti UTM)


2. peserta dapat mengetahui komponen GPS (satelit, pengendali dan receiver)


3. peserta dapat mengetahui fungsi dan merangkai elemen sebuah receiver GPS


4. peserta dapat merancang survai GPS


5. peserta dapat melakukan pengukuran/pengamatan GPS


6. peserta dapat melakukan transfer data dari alat GPS ke komputer (downloading)


7. peserta dapat mengelola data GPS dengan piranti lunak tertentu


8. peserta dapat mengembangkan aplikasi survei GPS

 

SIAPA SEBAIKNYA MENGHADIRI TRAINING INI?

Peserta pelatihan sebaiknya pernah berpengalaman dibidang survei-pemetaan dan telah terbiasa menggunakan komputer atau pihak-pihak yang merasa berkepentingan untuk mengetahui hal-hal yang berkaitan dengan GPS.

TRAINING MATERIAL OUTLINE /SYLLABUS :

1. Sistem koordinat dan Datum Referensi


2. Konstelasi dan Elemen GPS


3. Jenis dan Tipe Receiver GPS


4. Sinyal dan Data Pengamatan GPS


5. Kesalahan dan Bias GPS


6. Penentuan Posisi dengan GPS


7. Perencanaan Survei GPS


8. Pengolahan data GPS


9. Penentuan Posisi dengan GPS


10. Pengenalan Alat GPS


11. Perencanaan dan Penyuluhan


12. Pengukuran/Pengambilan data

 

TRAINING INSTRUCTOR

Dr. Ir. Wedyanto Kuntjoro, M.Sc.
Dr. Ir. Wedyanto Kuntjoro, M.Sc. is graduated from Geodesy Engineering Department Bandung Institute of Technology (ITB) for his Bachelor, from University of Tokyo Japan for his master program and Kyoto University Japan for his Doctorate program. And till now he is lecturer and head of department at Geodesy and Geomatics Engineering Department ITB. His expertise is Geodesy Meteorology and satellite geodesy. Dr. Ir. Wedyanto Kuntjoro, M.Sc. is active trainer for GPS related topics and he has done many projects related to GPS and survey.

 

TEMPAT TRAINING :

Hotel Golden Flower Bandung

DURASI TRAINING :

5 hari

WAKTU TRAINING :

1 – 5 November 2010

 

HARGA INVESTASI/PESERTA :
1.    Rp 7.450.000/peserta (bayar penuh)  atau
2.    Rp 7.250.000/peserta (early bird, yang membayar sebelum 25 Oktober 2010)  atau
3.    Rp 6.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

 

FASILITAS UNTUK PESERTA :

1. Modul Training


2. CD Training berisi materi training


3. Sertifikat


4. ATK: NoteBook dan Ballpoint


5. Jaket atau rompi atau T-Shirt


6. Tas atau ransel


7. Foto Training


8. Ruang Training dengan fasilitas Full AC dan multimedia


9. Makan siang dan 2 kali coffeebreak


10. Instruktur yang Qualified


11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

 

PEMINDAHAN TANAH MEKANIS

PEMINDAHAN TANAH MEKANIS

Hotel Golden Flower Bandung | 11 – 13 Oktober 2010 | Rp 5.450.000,-

 

TRAINING MATERIAL OUTLINE :

1. Alat-alat Pemindahan Tanah mekanis


2. Land Clearing


3. Pemuatan


4. Pengangkutan


5. Dumping

 

INSTRUKTUR TRAINING

Ir. A. M. Ulum A. Gani, M.Sc. ,who is graduated from Geofisika Tambang ITB Bandung, was born in Watan Soppeng, 18 December 1949, he is peneliti utama at Pusat Penelitian Geoteknologi Lembaga Ilmu Pengetahuan Indonesia (LIPI). 1990 – 1993 he was becoming head of  Laboratorium Eksplorasi Mineral, Balitbang Mineral, Puslitbang Geoteknologi, Lembaga Ilmu Pengetahuan Indonesia (LIPI), and 1993-1997 he was becoming head of Laboratorium Pemanfaatan Bitumen, Puslitbang Geoteknologi –LIPI Bandung. He is lecturer at Sekolah Tinggi Teknologi Mineral Indonesia (STTMI) Bandung since 1991-now and becoming head of department at Teknik Pertambangan, Sekolah Tinggi Teknologi Mineral Indonesia (STTMI) Bandung. He has performed many seminars related to his expertise.  Ir.A.M.Ulum A. Gani, M.Sc. has researched and published the results numerous number. At campus Sekolah Tinggi Teknolgi Mineral Indonesia (STTMI) Bandung he teachs for several subjects as follows Pengantar Teknologi Mineral, Bahan Galian Industri, Pembukaan Tambang bawah Tanah, Ventilasi Tambang, Seminar Tambang, and Kerja Praktek. His this much real experiences will be shared with participants in training class.

 

VENUE :

Hotel Golden Flower Bandung

 

TRAINING DURATION :

3 days

 

TRAINING TIME :

11 – 13 Oktober 2010

 

INVESTATION PRICE/PERSON :

1. Rp 5.450.000/person (full fare)  or


2. Rp 5.250.000/person (early bird, payment before 4 October 2010) or


3. Rp 4.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

 

GPS (Global Positioning System) - Yogyakarta

GPS (Global Positioning System)

Wisma MM UGM, Yogyakarta | 19 – 21 April 2010 | 08.00 – 16.00 WIB | Rp. 4.000.000,-

DESKRIPSI

Dalam memanfaatkan teknologi GPS untuk keperluan survei dan pemetaan, sangat tergantung dari tipe dan jenis receiver, metoda pengukuran, dan proses data dan ketelitian yang diperlukan. Pemilihan metoda, jenis receiver dan ketelitian yang dibutuhkan, memerlukan pemahaman yang memadai. Dalam pelatihan ini akan diberikan konsep dan tatacara pemilihan metoda, peralatan dan ketelitian yang tepat dalam memanfaat kan teknologi GPS untuk survei dan pemetaan.

 

PESERTA

Public atau Staf/karyawan yang bertugas dan bertanggungjawab dalam proyek penentuan lokasi baru, pemetaan dsb

 

METODE

Presentation, Discussion, Case Study, Evaluation

 

MATERI

• Metoda Penentuan Posisi dengan GPS· Dasar – dasar proses data GPS


• Teknologi GPS Untuk Survei Pemetaan


• Pemakaian data GPS pada data spasial (Dasar-dasar Teknologi SIG).


• Pemanfaatan data GPS dalam surta (Aplikasi data GPS) Praktikum


• Praktek Pengukuran / Pengamatan GPS


• Proses lanjut data GPS (post processing)

 

INSTRUKTUR

Arif Riyanto Budinugroho, S.T., M.Si.

Beliau mendapat gelar Magister Sains dari UGM Yogyakarta. Lulusan Teknik Geologi UPN Veteran Yogyakarta tahun 1996 ini aktif melakukan penelitian di bidang geologi di berbagai daerah dan lembaga dari tahun 1998 hingga sekarang.

 

WAKTU & TEPAT

19 – 21 April 2010
08.00 – 16.00 WIB
Wisma MM UGM Yogyakarta

 

INVESTASI

Biaya kursus: Rp. 4.000.000,- per orang (Non Residential),

INVESTASI

Biaya kursus (Non Residential) :

• Rp. 3.000.000,- per orang (Pendaftaran minimal 3 orang peserta)


• Rp. 3.250.000,- per orang (Pendaftaran 10 hari sebelum training)


• Rp. 3.500.000,- per orang (Pendaftaran 5 hari sebelum training)

 

FASILITAS

Certificate, Training Kit, Module / Handout, Lunch, Coffee Break, Souvenir

Well Stimulation: Acidizing and Hydraulic Fracturing

Well Stimulation: Acidizing and Hydraulic Fracturing

Ibis Malioboro Hotel, Yogyakarta | May 17-19, 2010 | Rp. 5.250.000,-

OBJECTIVES

One of the the most important factors in any lateral drilling project, regardless of the radii involved, is the fluid medium utilized in the both the drilling and completion phases. The physical hardware involved in drilling all types of lateral well-bore, short, medium and long-radius, have benefited from recent developments. It is of paramount importance that they are used in conjunction with a well designed mud system

After following these courses, participant of courses expected can:

• Comprehending drilling fluid function and characteristic.


• Comprehending clay characteristic.


• Comprehending drilling fluid chemical


• Comprehending drilling fluid types & field application


• Comprehending bases planning of drilling fluid.


• Comprehending way to overcomes of problem mud

COURSE CONTENT

Introduction

Drilling Fluid

• Drilling Fluid Function


• Drilling Fluid Composition


• Nature of Drilling Fluid Physical


• Calculation of Drilling Fluid


• Contamination of Drilling Fluid


• Equipment of Drilling Fluid

Characteristic of Clay

• Clay


• Mechanism Hydration of Clay


• Nature Of Physical of Clay


• Influence Of Sodium of Chloride


• Influence of pH

Drilling Fluid Additive

• Viscosifier


• Weighting Material


• Thinner


• pH Adjuster


• Filtration Loss


• Emulsifier


• Lost Circulation Material (LCM)

Stability of shale

• Diagnose Shale Problem


• Diagnose Shale Problem


• Faction of X Radiation and of Methylene Blue Test


• Rolling Test


• Additional Test

Oil-Base Mud

• Theory Emulsion


• Composition Mud Oil


• Nature Of Physical Mud Oil


• Activity of oil-base to reach hole stability drill


• Oil mud Low-colloid


• In mud oil-base Logging


• Trouble-Shooting with mud oil-base.

WHO SHOULD ATTEND

Drilling Engineers, Mud Engineers, Well-site Geologists, Drilling Supervisors, Tool Pusher, Rig Crews, Mud Personnel, Assistant Drillers, Mud Loggers, Logistic Personnel and involved in other personnel activity of drilling operation.

 

Instructor
Ir. Boedi Windiarto has graduated from bachelor degree of petroleum engineering. To share his knowledge with other people, he leads in training and courses at several topics, such as: Gas Lift Operation for Optimize Production, Basic Drilling Engineering for Operation, Well Completion & Work over, Basic Reservoir and Drilling Engineering

Mr. Boedi is a team leader for a group of Schlumberger Engineers outsourcing. He was supporting production and reservoir for Marginal Field Wonocolo Pertamina Cepu.

Schedule
May 17-19, 2010
3 days

Venue
Ibis Malioboro Hotel, Yogyakarta

Tuition Fee
Rp. 5.250.000,- per participant, excluding accomodation & tax.

 

Applied Mining Geostatistics

Applied Mining Geostatistics

Jayakarta Hotel, Bandung | May 3-6, 2010 | Rp. 7.250.000,-

 

INTRODUCTION

Since geo-statistics developed by Prof George Matheron in 1960, it has been applied greatly in mining industry for mineral resources evaluation and reserves modeling. Geo-statistical method considers the spatial structure which is represented by variogram model in estimation methods such as polygonal, triangular grouping, inverse distance square, nearest point, etc. Moreover, parameters of variogram model can be drawn on to optimize the drilling pattern or the influence area of sampling points.

Kriging is the most famous geo-statistical method used for reserves estimation, and it has been known as BLUE (Best Linear Unbiased Estimator). Krigging variance can be applied to assess the uncertainly (error) of estimation result.

Beside kriging, there are any other geo-statistical methods employed for spatial characterization and modeling of natural resource such as conditional simulation. Geo-statistics can also be utilizing to evaluate mineral reserves classification.

COURSE OBJECTIVES

1. To give knowledge about the concept of regionalized variable that is the principle of geo-statistics method, analysis and interpretation of variogram.


2. To give understanding about the principle of kriging method and its application for resources modeling and reserves estimation.


3. To give introduction about the principle of geo-statistical simulation, uncertainly analysis, and their application in natural resources evaluation.

COURSE OUTLINE

• Review of statistics,


• Concept of regionalized variable,


• Concept of experimental variogram,


• Analysis of variogaram model and its interpretation


• Conventional reserves estimation methods


• Variance of dispersion and variance of estimation


• Principle of kriging method and its application


• Introduction about deterministic method


• Geo-statistical simulation


• Uncertainty analysis


• Reserves classification based on geo-statistical method

SCHEDULE

Day 1

1. Review of statistics


2. Conventional reserves estimation methods


3. Concept of regionalized variable and calculation of experimental variogram

Day 2

1. Analysis and interpretation of variogram


2. Exercise and practice of variogram calculation and fitting model


3. Concept of variance dispersion


4. Concept of variance of estimation.

Day 3

1. Principle of kriging method and its application for reserve estimation


2. Exercise and practice of kriging method


3. Introduction and deterministic method for mineral deposit evaluation

Day 4

1. Uncertainty analysis based on kriging variance and conditional simulation


2. Optimization of drilling pattern and reserves classification based on geo-statistical method

WHO SHOULD ATTEND

• Miners (Engineer, Business Development Manager)


• Geo-scientist (Geologist, Geophysicist, Exploration)


• New Venture & Field Business Development


• Hydrologist


• Everybody or professional who want better understanding and to broaden the knowledge from the course subject

 

Instructor

Mohamad Nur Heriawan, ST, MT, Ph.D graduated from Bachelor of Engineering (ST.), Division of Mining Exploration, Department of Mining Engineering, ITB, Master of Engineering (MT.), Master Program of Applied Geophysics, Postgraduate Program, ITB and Postgraduate Diploma, Option of Mine Geostatistics, Geostatistics Groups, Center of Geosciences, Ecole des Mines de Paris, France.  Doctor of Philosophy (Ph.D), Department of Environmental Science, Graduate School of Science and Technology, Kumamoto University, Japan. Now, he is a Lecturer/ Assistant Professor at the Research Group of Earth Resources Exploration, Faculty of Mining and Petroleum Engineering (FTTM), ITB. He is a member of International Association for Mathematical Geology (IAMG). He has experiences for teaching geo-statistics course in PT. INCO Tbk,   Unit Geomin PT. ANTAM Tbk, Divison of Geo & Technical Services PT. Freeport Indonesia, PT. Arutmin Indonesia, and some public course.

Schedule
May 3-6, 2010
4 days

Venue
Jayakarta Hotel, Bandung

Tuition Fee
Rp. 7.250.000,-    per participant, excluding accommodation & tax.

Gas Turbine: Operation and Maintenance

Gas Turbine: Operation and Maintenance

Novotel Hotel, Bandung | April 26-29, 2010 | Rp.7.250.000,-

 

COURSE OBJECTIVES

The purpose of this course is to introduce personnel to the turbo machinery package, explain system functions and interface, introduce proper operation procedures, and acquaint the student with basic maintenance procedures.

At the conclusion of this course the student should have a basic understanding of turbine engine theory, be familiar with the Solar turbine package and its components, understand satisfactory operation of the package, and be aware of routine maintenance procedures.

This course does not prepare the student to accomplish advanced maintenance and troubleshooting functions. Solar turbine package are built to exacting specifications and more extensive training is required before a serviceman is qualified to perform major repairs and adjustments.

COURSE CONTENTS

1. Introduction and General Description


2. Turbine Engine


3. Pneumatic and Hydraulic Start System


4. Air System


5. Gas Fuel System


6. Lube Oil System


7. The Gas Boost Compressor


8. Turbine Control System


9. Turbotronic System


10. Operating Procedures


11. Performance Analysis


12. Safety Requirement


13. Preventive Maintenance


14. Corrective Maintenance


15. Visit to Saturn Gas Turbine Test Cell and Repair Facility at PT. TCS Bandung

WHO SHOULD ATTEND

The following selected participants should attend this course:

• Maintenance Engineer/ Superintendent/ Supervisor


• Rotating Engineer/ Superintendent/Supervisor


• Power Plant Engineer/ Superintendent / Supervisor.


• Everybody who wants to add knowledge and interest in the above subject

Instructor
Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA.

Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management.

Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

Schedule
April 26-29, 2010
4 days

Venue
Novotel Hotel, Bandung

Tuition Fee
Rp.7.250.000,- per participant, excluding accommodation & tax.

Geo–Statistical Resource: Modeling and Estimation

Geo–Statistical Resource: Modeling and Estimation

Jayakarta Hotel, Bandung | August 3-7, 2009 | 8.450.000,-

 

INTRODUCTION

Multivariate geo-statistics involves more than one variable. It can improve the estimation of a variable from other variables sampled either at same points (isotopic case) or not always at the same points (heterotypic case). In many cases when drilling a layering deposit, not all drill holes obtained both top and bottom of the deposit. In this case, estimates on top or bottom elevation can be solved by multivariate or vicariate geo-statistics. Simple co-kriging or ordinary co-kriging is very often used to estimate top or bottom elevation of a layering deposit, when they are unknown in a drill hole. Simple cokriging is used if the variables are stationary and their mean are known well, otherwise we should use ordinary cokriging. Top elevation can be estimated using variable of bottom elevation or on the contrary. In case the cross-variogram of top and bottom elevation is identical or proportional with their simple variogram in isotopic case, the cross variogram is a model of intrinsic correlation, so their cokriging coincides with their own kriging. In other word, top and bottom elevation are self-krigeable. In general, the using of cokriging can improve the consistency between estimation of different variables.

COURSE OUTLINE

1. Statistical analysis of sampling and data QA/QC

• Principles of sampling, sampling error and its components


• Statistics of sample (measure, shape, character of population, etc.)


• Distribution models (normal, lognormal)


• The variance of the mean and detecting sampling bias


• Data QA/QC, verification and analysis

2. Geological models and domains

• Volume variance concept


• Statistical testing of domains


• Influence of domains on resource estimates

3. Geo-statistics

• Measure of heterogeneity or spatial continuity


• Stochastic random fields, correlation function and semivariogram


• Variography (variograms and geology)


• Transformation of data prior to variogram calculation


• Tricks and tips facing multiple variograms (Gaussian, spherical, exponential, zonal anisotropy, geometric anisotropy, etc.)

4. Kriging (linear and non-linear)

• Kriging process


• Kriging sensitivity

5. Geo-statistics applications and other methods

• Inverse distance, nearest neighbor, polygon


• Resource modeling and estimation


• Understand place of geo-statistics in mining


• Understand issues that affect accurate estimation

6. Resource reserve classification

7. Case studies and practical exercises

WHO SHOULD ATTEND

• Miners (Engineer, Business Development Manager)


• Geo-scientist (Geologist, Geophysicist, Exploration)


• New Venture & Field Business Development


• Hydrologist


• Everybody or professional who want better understanding and to broaden the knowledge from the course subject

 

Instructor
Mohamad Nur Heriawan, ST, MT, Ph.D

Mohamad Nur Heriawan, ST, MT, Ph.D graduated from Bachelor of Engineering (ST.), Division of Mining Exploration, Department of Mining Engineering, ITB, Master of Engineering (MT.), Master Program of Applied Geophysics, Postgraduate Program, ITB and Postgraduate Diploma, Option of Mine Geostatistics, Geostatistics Groups, Center of Geosciences, Ecole des Mines de Paris, France. Doctor of Philosophy (Ph.D), Department of Environmental Science, Graduate School of Science and Technology, Kumamoto University, Japan. Now, he is a Lecturer/ Assistant Professor at the Research Group of Earth Resources Exploration, Faculty of Mining and Petroleum Engineering (FTTM), ITB.

Schedule
August 3-7, 2009
5 days

Venue
Jayakarta Hotel, Bandung

Tuition Fee
8.450.000,- per participant, excluding accommodation & tax.

 

Electric Machinery: Selection Operation, Maintenance and Troubleshooting

Electric Machinery: Selection Operation, Maintenance and Troubleshooting

Grand Serela Hotel, Bandung | June 22-26, 2009 | Rp. 8.250.000,-

 

WHAT YOU WILL LEARN

• Enhance understanding of electric Machinery operation and maintenance, and principles of each main parts


• Understand the fundamental theory of electrical Motor and its transformer


• Enhance understanding of synchronous generator characteristics and precautions


• Learn how to run parallel operation and perform load sharing of generator correctly


• Learn how to inspect prime mover operational characteristics properly


• Enhance knowledge of protections apparatus and maintenance aspects

COURSE OUTLINE

Introduction to Electrical Machinery

• Overview of power Machinery system characteristics


• Load considerations

Electric Motor

• Fundamental Theory


• Load Characteristic/ Speed Control


• Motor Part


• Functional of Motor Protection Equipments


• Motor Maintenance & Trouble Shooting

Transformer

• Transformer part


• Functional of transformer protection equipment


• Trouble shooting


• Transformer maintenance

Synchronous Generator Characteristics

• No load characteristic


• Short circuit characteristic


• Loading characteristics


• Excitation system and automatic voltage regulator

Parallel Operation of Generator

• Synchronizing generators


• Operation charts


• Load sharing (Active, Reactive)


• Generator Protection System

Maintenance of Electric Generator

• Maintenance strategy


• Preventive maintenance


• Maintenance records


• Servicing schedule

WHO SHOULD ATTEND

The following selected participants should attend this course:

• Electric Engineer/Supervisor/Superintendent


• Maintenance Engineer/Supervisor/Superintendent


• Instrument Engineer/Supervisor/Superintendent


• Power Plant Engineer/Supervisor/Superintendent


• Everybody or professional who wants to broaden knowledge or gain benefit from this course

 

Instructor
Ir. Qamaruzzaman, MT graduated from Electrical Engineering, Bandung Institute Technology. He studied at Technische Universitaet Braunschweig, Federal Republic of Germany in 1979 to add has knowledge. He has been lectures and researcher at Department of Electrical Eng ITB since 1973. He has experience in PT. Sucofindo as senior Engineer for Perum Pelabuhan II Project, as senior Engineer, Feasibility study at PT. Spektra, etc. He is actives in IEEE Society Power Electronic, Industrial Engineer, ndustrial Application sine 1986.

Schedule
June 22-26, 2009
5 days

Venue
Grand Serela Hotel, Bandung

Tuition Fee
Rp. 8.250.000,- per participant, excluding accommodation & tax.