Developing Effective Maintenance with Reliability-centered Maintenance (RCM)

Developing Effective Maintenance with Reliability-centered Maintenance (RCM)

 

Harris Hotel Tebet / Ibis Hotel | Friday-Saturday, 27th-28th May 2011 | 09.00 AM – 04.00 PM | Rp. 2.650.000,- per participant

PENGANTAR PELATIHAN :

Aset fisik, sejalan dengan hukum fisika alamiah, akan selalu mengalami penurunan performansi (deteriorating). Karenanyalah diperlukan tindakan perawatan (maintenance) sedemikian sehingga aset tersebut masih tetap dapat berfungsi dengan memadai.

Bidang maintenance menghadapi tantangan yang semakin besar sejalan dengan tingginya tuntutan akan ketersediaan dan keandalan berbagai aset fisik, safety yang lebih baik, kualitas produk yang lebih tinggi, tidak mencemari lingkungan, umur hidup aset yang lebih panjang, dan yang tidak kalah pentingnya adalah tuntutan efektifitas biaya yang sangat baik. Sehingga muncullah konsep Reliability-centered Maintenance (RCM) yang menandai era Generasi Ketiga dari bidang maintenance tersebut.

Reliability-centered Maintenance (RCM) merupakan proses yang digunakan untuk menentukan maintenance requirements dari aset fisik apapun dalam konteks operasionalnya. Karena menggunakan pendekatan yang komprehensif, maka RCM akan dapat melakukan reduksi substansial dari beban kerja rutin yang akan membuat berbagai tugas yang tersisa dapat dilakukan dengan tepat. Ini bersamaan dengan eliminasi dari berbagai tugas yang tidak-produktif sehingga mengarah pada maintenance yang lebih efektif.

 

Sasaran Program :

Setelah mengikuti training ini, maka diharapkan

1. Peserta mampu memahami pengertian dan ruang lingkup dari RCM.
2. Peserta mampu memahami mekanisme setahap demi setahap dari kerangka kerja RCM.
3. Peserta memahami dan mampu mengaplikasikan RCM di lingkungan kerja.

 

Pelatihan Ini Sangat Penting Bagi :

Diharapkan berasal dari Manager dan Supervisor yang terkait dengan maintenance

 

Topik Bahasan :

Training ini disusun penyajian dan penyampaiannya secara terstruktur sebagai berikut:

1. RCM Definition and Scope.


2. Functions and Functional Failures.


3. Failure Modes and Effects Analysis.


4. Failure Consequences.


5. Proactive Maintenance: Preventive and Predictive Tasks.


6. Default Actions.


7. Applying the RCM Process.

 

 

Method of Training
Training dan workshop ini disajikan dan disampaikan dalam bentuk ceramah, diskusi, latihan, dan workshop.

 

Course Instructors

• SACHBUDI ABBAS RAS, M. Eng
  Education = August 2002, M. Eng, Industrial Engineering, Bandung Institute of Technology February 1999, B. Eng Industrial Engineering, Bandung Institute of Technology.


• Teaching Experience = 2001-Now = Courses: Introduction to Industrial Engineering, Quality Engineering, Operational Research, Reliability Engineering, Production Planning and Control, Industrial Statistics, Product Design and Development, etc. At: Indonesian Computer University (Bandung), University of Trisakti (Jakarta), University of INDONUSA Esa Unggul (Jakarta). May 28th-29th 2004, Intructor, National Workshop on Quality Engineering, University of Trisakti (Jakarta).


• Work Experience: 2003-Now : Head of Production System Laboratory Industrial Engineering Department, University of INDONUSA Esa Unggul 2001-2002 : Quality Engineering Supervisor PT. Starlink Indonesia.

 

Venue :

Hotel Harris Tebet / Hotel Aryaduta Semanggi, Jakarta

 

Date :

Friday-Saturday, 27th-28th May 2011| 08.30 AM – 04.00 PM

 

Investasi

• Rp. 2.000.000,- per participant (Group Price) Min 3 Participants


• Rp. 2.650.000,- per participant (Full Fare Price)


• Rp. 2.400.000,- per participant (Early Bird Price) Lunas 7 Hari Sebelum Training


• Kirim 4 Peserta, Gratis Peserta Ke-5

 

Include

• 1 Kali Makan Siang


• 2 Kali Coffee Break


• Tas Ransel


• Organizer Book


• Marker


• Seminar Kit


• Makalah Training


• Sertifikat


• CD Materi Presentasi Training


• Trainer yang Berkualitas

 

QUALITY CONTROL CIRCLE (QCC) IMPLEMENTATION : Managing, Facilitating, Audit, & Convention

QUALITY CONTROL CIRCLE (QCC) IMPLEMENTATION : Managing, Facilitating, Audit, & Convention
Harris Hotel Tebet / Ibis Arkadia Hotel | Friday-Saturday, 13th-14th May 2011 | 09.00 AM – 04.00 PM | Rp. 2.650.000,-

PENGANTAR PELATIHAN :

Banyak perusahaan Jepang telah merasakan manfaat dari penerapan program Quality  Control Circle (QCC). Dalam kondisi krisis saat ini, setiap perusahaan dituntut untuk melakukan strategi cost reduction. Maka, setiap karyawan perlu dibekali metode melakukan cost reduction yang benar, dilibatkan secara sistematis.

Quality Control Circle (QCC) adalah sekelompok karyawan yang secara proaktif membahas dan memecahkan masalah-masalah dalam pekerjaan dan  lingkungannya dengan  tujuan meningkatkan mutu usaha. Pada pelaksanaanya  perlu  adanya fasilitator (pemandu) atau atasan langsung.

Karena fasilitator (pemandu) atau atasan langsung sangat menentukan keberhasilan implementasi QCC di dalam perusahaan,  maka ia harus disiapkan dengan pengetahuan yang  mendasar  baik  tentang   konsep  Total Quality Management (TQM) maupun  perangkat  kendali  mutu dan peran-peran fasilitator.

 

Method of Training

Pelatihan ini menggunakan metode interaktif, dimana peserta dikenalkan kepada konsep, diberikan contoh aplikasinya, berlatih menggunakan konsep, mendiskusikan proses dan hasil latihan.

 

Objectives Program :

• Memahami konsep dan bentuk-bentuk penerapan Total Quality Management


• Meningkatkan kesadaran terhadap mutu dan masalah-masalah organisasi


• Membekali keterampilan pemecahan masalah mutu


• Mampu membentuk  dan membimbing QCC dalam proses pemecahan masalah dengan Delapan Langkah dan Tujuh Alat (DELTA)

Pelatihan Ini Sangat Penting Bagi :
Manager, Superintendent and Supervisor of Operational functions, Maintenanace, Health, Safety & Environmental Senior Staff who is accountable to handle Risk Assessment report evaluation and provide guidance for the companies related to environmental and social risks exposure.

Topik Bahasan :

1. Konsep Total Quality Management  dan perubahan


2. KAIZEN sebagai dasar QCC


3. Proses Pemecahan Masalah (Daur PDCA)


4. Plan : (1). Identifikasi Masalah, (2), Pengumpulan dan Analisa Data, (3). Analisa Sumber Penyebab Masalah, (4) Validasi Faktor Penyebab


5. Do : (5). Menyusun Rencana Penanggulangan, (6). Melaksanakan Ide Penanggulangan


6. Check : (6). Memastikan Hasil Perbaikan


7. Act : (7). Standarisasi, (8). Identifikasi Maslah Berikutnya dan Memutar Roda PDCA


8. Tools Pemecahan Masalah: Pareto Chart, Bar Chart, Pie Chart, Run Chart, Fishbone Diagram, Histogram, dan Scatter Diagram.


9. Latihan memecahkan masalah dengan menggunakan DELTA


10. Teknik Membuat Laporan QCC


11. Teknik Audit QCC


12. Teknik Presentasi QCC & Metode Konvensi yang Efektif


13. Peranan Fasilitator QCC


14. Teknik fasilitasi QCC


15. Manajemen QCC di Perusahaan


16. Kepemimpinan seorang Facilitator dalam QCC

Course Instructors

TIM PROFESSIONAL CONSULTANT
Berpengalaman dalam implementasi manajemen produktivitas dan kualitas di perusahaan baik nasional maupun multi nasional. Telah membantu banyak perusahaan dalam implementasi Total Quality Management, Lean Manufacturing (Toyota Production System), Six Sigma Management, Gemba Kaizen, Supply Chain dan Material Management.

 

Investasi

• Rp. 2.000.000,- per participant (Group Price) Min 3 Participants


• Rp. 2.650.000,- per participant (Full Fare Price)


• Rp. 2.400.000,- per participant (Early Bird Price) Lunas 7 Hari Sebelum Training


• SPECIAL !!!     Kirim 4 Peserta, Gratis Peserta Ke-5         SPECIAL !!!

 

Include

• 1 Kali Makan Siang


• 2 Kali Coffee Break


• Tas Ransel


• Organizer Book


• Marker


• Seminar Kit


• Makalah Training


• Sertifikat


• CD Materi Presentasi Training


• Trainer yang Berkualitas

 

Routine Maintenance : Perawatan Mesin Produksi Secara Berkesinambungan

Routine Maintenance : Perawatan Mesin Produksi Secara Berkesinambungan

Harris Hotel Tebet / Ibis Arkadia Hotel | Saturday, 28th May 2011 | 09.00 am – 04.00 pm | Rp. 1.350.000,- per participant

Seminar / Workshop Description :
Autonomous Maintenance merupakan elemen terpenting dalam Total Productive Maintenance (TPM). TPM adalah metode perawatan terpadu untuk meningkatkan efektivitas penggunaan peralatan secara signifikan, dengan Zero Breakdown, Zero Defect, dan Zero Accident sebagai sasaran akhir.

Dalam Autonomous Maintenance, operator produksi tidak saja menjalankan kegiatan produksi, tetapi juga dilibatkan dalam kegiatan perawatan sederhana. Dengan demikian, gejala kerusakan dapat dideteksi sedini mungkin, sehingga kerusakan dapat dicegah secara total.

Pelatihan ini sangat penting bagi :

Staff, Foreman, Supervisor yang ingin mengembangkan kemampuan dalam melakukan analisa data, dan pemecahan masalah.

Method of Training
Pelatihan ini menggunakan metode interaktif, dimana peserta dikenalkan kepada konsep, diberikan contoh aplikasinya, berlatih menggunakan konsep, mendiskusikan proses dan hasil latihan.

Topik :

• KONSEP DASAR TOTAL PRODUCTIVE MAINTENANCE
• PHILOSOPHY AUTONOMOUS MAINTENANCE
• 5S SEBAGAI DASAR PENERAPAN AUTONOMOUS MAINTENANCE
• LANGKAH-LANGKAH PENERAPAN AUTONOMOUS MAINTENANCE
  
  • Pembersihan Awal
  • Pencegahan Sumber Kontaminasi
  • Standar Pembersihan dan Pelumasan
  • Inspeksi Menyeluruh
  • Standar Perawatan Mandiri
  • Process Quality Assurance
  • Supervisi Mandiri
  
  
• PERAN PIMPINAN DALAM PENERAPAN AUTONOMOUS MAINTENANCE

Course Instructors

TIM PROFESSIONAL CONSULTANT
Berpengalaman dalam implementasi manajemen produktivitas dan kualitas di perusahaan baik nasional maupun multi nasional. Telah membantu banyak perusahaan dalam implementasi Total Quality Management, Lean Manufacturing (Toyota Production System), Six Sigma Management, Gemba Kaizen, Supply Chain dan Material Management.

Venue :

Harris Hotel Tebet / Ibis Arkadia Hotel Jakarta

Date :

Saturday, 28th May 2011 | 09.00 am – 04.00 pm

Investasi

• Rp. 1.000.000,- per participant (Group Price) Min 3 Participants
• Rp. 1.350.000,- per participant (Full Fare Price)
• Rp. 1.100.000,- per participant (Early Bird Price) Lunas 7 Hari Sebelum Training
• Kirim 4 Peserta, Gratis Peserta Ke-5

Include

• 1 Kali Makan Siang
• 2 Kali Coffee Break
• Tas Ransel
• Organizer Book
• Marker
• Seminar Kit
• Makalah Training
• Sertifikat
• CD Materi Presentasi Training
• Trainer yang Berkualitas

HYDRAULICS POWER SYSTEM

HYDRAULICS POWER SYSTEM

Bandung | October 11-14, 2011 |IDR 8.250.000,-/ Person
Bali |December 20-23 , 2011 |IDR 9.750.000,-/ Person

You will learn

• Basic theory of hydraulics in relation to hydraulic power system


• Basic calculation of hydraulic transmission power and knowledge about basic hydraulics circuit


• The utilization of hydraulics system in industries and its advantages


• Basic analyzing capability on simple hydraulic circuit

Course contents
Introduction to Fluid Power

• History of Fluid Power


• Advantages of Fluid Power


• Application of Fluid Power


• Component of a Fluid Power System


• Type of Fluid Power Systems


• The Fluid Power Industry

Properties of Hydraulic Fluids

• Fluids


• Weight, Density and Specific Gravity


• Pressure, Head and Force


• The Metric SI System


• Pascal Law


• Bulk Modulus


• Viscosity and Viscosity Index


• Oxidation and Corrosion Prevention


• Fire and Foam Resistance Fluids


• Lubricating Ability


• General Types of Fluids

Energy and Power in Hydraulic Systems

• Review of Mechanics


• Application Pascal Law


• Conservation of Energy


• Hydraulic Horse Power


• Bernoulli Equation


• Energy, Power and Flow rates in SI system

The Distribution System

• Sizing Flow rate requirement


• Pressure Rating of Conductors


• Steel Pipes


• Steel Tubing


• Plastic Tubing


• Flexible Hoses


• Quick Disconnect Couplings

Basic Hydraulic Flow in Pipes

• Laminar and Turbulent Flow


• Reynolds number


• Darcy’s Equation


• Frictional Losses in Laminar and Turbulent Flow


• Losses in Valves and Fittings


• Equivalent Length Technique


• Hydraulic Circuit Analysis


• Flow Measurement


• Pressure Measurement

The Source of Hydraulic Power

• Pumping Theory


• Pump Classification


• Gear pump


• Vane pump


• Piston Pump


• Pump Performance


• Pump selection


• Pressure Intensifier


• Pump Performance rating

Fluid Power Actuators

• Linear hydraulic actuators


• Limited Rotation Hydraulic Actuator


• Vane motors


• Piston Motors


• Hydraulic Motor Performance


• Hydrostatic transmissions


• Electro hydraulic Stepping Motors


• Low Speed High Torque Motors

Control Components in Hydraulic Systems

• Directional Control Valves


• Pressure Control Valves


• Flow Control Valves


• Servo Valves


• Hydraulic Fuses


• Pressure and Temperature Switch


• Shock Absorber

Hydraulic Circuit Design and Analysis

• Control Single Acting Hydraulic Cylinder


• Control of Double Acting Cylinder


• Regenerative Circuit


• Pump unloading Circuit


• Double Pump Hydraulic System


• Pressure Intensifier Circuit


• Counter Balance Valve Application


• Hydraulic cylinder sequencing circuit


• Fail safe circuits


• Speed Control Of a Hydraulic Motor


• Hydrostatic Transmission System

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.




Documentation

• Quality training material kits will be on registration, additional papers, & handouts assignment by TIM.


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included calculator, T-shirt or jacket, cap, ect.


• Convenient training facilities with four star quality


• Morning and afternoon coffee breaks and lunch for along the training


• Certificate of Completion


• Exclusive flash disk

Tuition Fee & Registration  Deadline

• IDR 8.250.000-/ Person (Bandung)


• IDR 9.750.000-/ Person (Bali)


• Registration deadline a weeks before training held.

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

 

OIL SPILL - OIL BOOM AND ENVIRONMENTAL MANAGEMENT

OIL SPILL - OIL BOOM AND ENVIRONMENTAL MANAGEMENT

Hotel Jayakarta,  Bandung |25 – 28 April 2011| Rp 7.250.000
Hotel Jayakarta,  Bandung |26 – 29 September 2011| Rp 7.250.000

Training Objective

After attending the training, participants have knowledge about oil characteristic, environmental impacts, fate of oil in the environment, and how to manage oil spill /oil boom including prevention and countermeasure as well as contingency planning and responding to oil spill/boom

 

TRAINING MATERIAL OUTLINE :

1.    Oil Characteristic: Petroleum and Non Petroleum Oil
2.    The Behavior and Effect of Oil Spill and Oil Boom in the Aquatic Environment

• Impact on Species


• Impact on Habitats

3.  Oil Spill and Boom Location: Geology of Shorelines, The Fate of Spilled Oil Cleaning Up, Containment and Recovery of Oil Spills and Booms Response Techniques

• Booms


• Skimmers


• Sorbets


• Dispersing Agents


• Gelling Agents


• Biological Aspects

4.    Alternative Countermeasures for Oil Spills and Oil Booms
5.    Shoreline Cleanup of Oil Spills and Oil Booms
6.    Preparing for Oil Spills and Booms: Contingency Planning
7.    Responding to Oil Spills and Oil Booms
8.    Remediation
9.    Case Study in the Field
10.  Discussion

 

TRAINING INSTRUCTOR

Ir. Hilman Ahmad, DCE

Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

VENUE :

Hotel Jayakarta  Bandung

 

TRAINING DURATION :

4  days

 

TRAINING TIME :

1. 25 – 28 April 2011


2. 26 – 29 September 2011

 

INVESTATION PRICE/ PERSON :

1. Rp 7.250.000/person (full fare)  or


2. Rp 7.000.000/person (early bird, payment 1 week before training) or


3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS :

1. Training Module


2. Flash Disk contains training material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. T-Shirt


6. Bag


7. Training Photo


8. Training room with Full AC facilities and multimedia


9. Lunch and twice coffeebreak every day of training


10. Qualified Instructor


11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

RECOMMENDATION TO PARTICIPANTS :

Participants are recommended to bring laptop for practice sessions

ENGINEERING ECONOMY

ENGINEERING ECONOMY

Hotel Golden Flower, Bandung |27 – 29 April 2011 | Pkl. 09.00 – 16.30 WIB | Rp 6.500.000,00
Hotel Golden Flower, Bandung | 18 – 20 Mei 2011 | Pkl. 09.00 – 16.30 WIB | Rp 6.500.000,00

After completing this training, you should able to do the following

• Define different terms of investment, costs, and investment choice.


• Define the terms engineering economy, alternative, evaluation criteria, time value of money, interest, anprincipal


• Define interest rate and interest period and calculate the interest that had been accrued in one interest period


• Define simple interest and compound interest and calculate the total money accrued after one or more years


• Define and derive the following factors:

1. Single-payment compound-amount factor


2. Single-payment present-worth factor


3. Uniform-series present-worth factor


4. Capital-recovery factor


5. Sinking-fund factor

• Find the correct numerical value of a factor in a table


• Define and develop uniform-gradient present-worth factor and annual series factor using single –payment present-worth factor


• Calculate the present-worth or future worth of special cash flow


• Define compounding period, nominal interest rate, effective interest rate, and payment period


• Derive the formula for computing the effective interest rate and define each term in the formula


• Use multiple factors to solve the more intricate problems


• State the important of incremental analysis and explain that it is true with the analysis of different Alternative


• Select the better alternative using the following methods:

1. Present-worth calculation both equal life cycle or different life cycle


2. Equivalent-Uniform-Annual-Worth


3. Benefit/Cost Ratio


4. Internal Rate of Return

• Explain the concepts of Retirement and Replacement and use the above concepts to calculate the related problem


• Define income tax, inflation, risk  and put them into the problem of selecting the better alternative


• Use the entire concept stated above to solve more complex problems.

Hari pertama:

1. Investment

• Introduction


• Mutually Exclusive, Interdependent, Public Investments and Externalities


• Costs: Social, Opportunity, Capital, Income Tax and Inflation


• Investment Choice: Decision Criteria and Procedure


• Alternatives: Recognition and Consequences over Time


• Viewpoint and System Analysis


• Time Horizons and Equal Service Life


• Consequences: Differential and With-Without Criterion


• Common Unit of Measurement


• Sunk Cost, Depreciation and Incremental Analysis


• Analysis: The Manager’s and The Accountant’s


• Equivalence

2. Interest and Financial Mathematics

• Introduction


• The Double Value of Money


• Graphical Conventions


• Formulas


• Rates of Interest: Nominal and Effective


• Interest and Principal Separation

3. Present Worth dan Annual Worth

• Present Worth


• Capitalized-Cost Evaluation


• Capitalized-Cost comparison of Two Alternatives


• Study Period for Alternatives Having Different Lives


• Salvage Sinking-Fund  Method


• Salvage Present-Worth Method


• Capital Recovery-plus-Interest Method


• Comparing Alternatives by EUAW


• EUAW of a Perpetual Investment

4. Benefit/Cost Ratio (B/C)  Evaluation

• Classification of Benefits, Costs, and Disbenefits


• Incremental Analysis Necessary


• Benefits, Disbenefits, and Cost Calculation of a Single Project


• Selection of Alternatives using B/C Analysis


• Mutually Exclusive Alternative: Selection using B/C Ratio Analysis

Hari kedua:

5. Rate of Return

• Overview of Rate-of-Return Computation


• Rate-of-Return Calculation using Present-Worth Method


• Rate-of-Return Calculation using EUAW Method


• Multiple Rate-of-Return


• Internal and Composite Rate-of-Return

6. Rate of Return Evaluation Multiple Alternatives

• Incremental Analysis


• Net Cash Flow Tabulation


• The Interpretation of Return on Extra investmen


• Evaluation of Incremental Rate-of-Return  using PW equation


• Mutually Exclusive Alternatives: Selection using Rate-of-Return Analysis

7. The Effect of Income Tax on Economic Analysis

• Introduction


• Income Tax and Tax Brackets


• Deductions


• Book and Market Values


• Depreciation : Accelerated Cost Recovery System


• Depreciation : Alternative ACRS Method


• ACRS Dispositions


• Computation of After-Tax Cash flow using ACRS


• Methods of Calculating Depreciation


• Selection of Depreciation Method


• Lives


• Gain or Losses on Disposition


• Investment Tax Credit

8. Inflation

• Price : Changes and Indexes


• Rates: Constant, Current, and Inflation


• The Mathematics of Inflation


• Nominal and Effective Rates Related to Inflation


• Incorporating Inflation in an Economic Decision


• Variable Inflation Rates

9. Risk

• Introduction and Definitions


• Probability Measurement


• Expected Value


• Objective and Subjective Probabilities


• Risk Measurement

Hari ketiga:

10. Loans

• Loan Criteria


• Unequal Term of Loan


• Tax Effect


• Inflation Effects


• Collateral

11. Capital Budgeting

• Introduction and Modeling


• Programming Versus Efficiency of Capital Criteria


• Capital Rationing: Independent  Projects


• Capital Rationing: Independent and Mutually Exclusive Projects


• Capital Rationing: Interdependent  Projects

12. The Cost of Capital

• Introduction and Definitions


• Personal Cost of Capital


• Opportunity Cost of Capital and The Capital Budget


• Financial Cost of Capital in The Private Sector


• Public Sector Opportunity Cost of Capital


• Risk and The Cost of Capital

13. Replacement Analysis

• Retirement


• Defender, Chalenger and Economic Life


• Identical Replacement


• Different Replacement

14. Sector Analysis

• Introduction


• The Effect of View Point on Cash Flow—Transfer Payment


• Pareto and Kaldor


• The Private sector Viewpoint


• The Public Sector Viewpoint


• The Cost of Unemployed Resources


• Shadow Prices

15. Sensitivity Analysis

• Introduction and The Concept of Payback


• Breakeven Analysis


• Sensitivity: The Narrow Definition


• Sensitivity: The Broad Definition


• Multi-variable Sensitivity Analysis

Pembicara : Marthen Luther Doko

Alumnus Institut Teknologi Bandung tahun 1982  dan melanjutkan S2 di Institut Teknologi Bandung lulus tahun 1997. Saat ini menjabat sebagai Department Head  of  Chemical Engineering Dept. National Institute of Technology dan  Lecturer in Chemical Engineering Dept. National Institute of Technology.

Sering mengikuti seminar di dalam dan luar negeri antara lain : International Seminar on Chemical Engineering 2010, International Federation of Automatic Control Simposium on Automatic Control 2006, International Symposium on Chemical Engineering, Hanoi 2005, Seminar Nasional Teknik Kimia “Kejuangan” 2007, dll.

JADWAL & LOKASI PELATIHAN:

Jadwal:

• 27 – 29 April 2011, Pkl. 09.00 – 16.30 WIB


• 18 – 20 Mei 2011 , Pkl. 09.00 – 16.30 WIB

Lokasi:

Hotel Golden Flower, Bandung

Investasi:

• Rp 6.500.000,00/Peserta

Fasilitas

• Setiap peserta akan memperoleh 'Certificate of Accomplishment', Gandaan Materi baik hardcopy (makalah) maupun softcopy (CD Materi), dan konsumsi (makan siang dan 2xmeals).

BASIC DRILLING AND HEALTH, SAFETY, ENVIRONMENTAL CONSIDERATION

BASIC DRILLING AND HEALTH, SAFETY, ENVIRONMENTAL CONSIDERATION

Bandung | October 18-21, 2011 | IDR 8.250.000,-/ Person

 

SASARAN BELAJAR :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

• Memahami prinsip-prinsip dasar dan berbagai perhitungan sederhana untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan  perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.


• Melakukan diagnosis sederhana dan memengerti penyelesaian dan membuat suatu sumur minyak, gas atau panas bumi.


• Membuat analisis sederhana terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran  kinerja dan merencanakan pengembangannya.


• Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perencanaan lumpur pemboran, semen, hidrolika, well control.


• Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.


• Pengetahuan tentang Peraturan Perundangan dalam K3L


• K3L dalam Operasi Pemboran

Who Should Attend?

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

Outline Course

• Introduction : Rotary Drilling Operations
  
  
  
  • Steps to drilling a well
  
  
  • Types of rigs
  
  
  • Rig Components
  
  
  • Rig Systems
  
  
  
  


• Rheology of Drilling and Completion Fluids
  
  
  
  • Equations and Inflow PerformanceRelationship Functions of Drilling/ Completion Fluids
  
  
  • Fluid Types,
  
  
  • Fluid Models
  
  
  • Introduction to Rotary Viscometer
  
  
  • Other Testing Equipment
  
  
  • Objectives of Monitoring Fluids
  
  
  
  


• Mud System
  
  
  
  • General Equations and Concepts Diagnostic tests
  
  
  • Water based muds
  
  
  • Oil based muds
  
  
  • Additives
  
  
  • Mud handling system
  
  
  
  


• Cementing
  
  
  
  • Tubing Design Functions of cement
  
  
  • Cement Types
  
  
  • Cement Additives
  
  
  
  


• 
  


• Oil Field Tubulars and Hydraulics
  
  
  
  • Drill string
  
  
  • Casing and tubing
  
  
  • Casing classification
  
  
  • Stresses on casing
  
  
  • Casing setting depth
  
  
  • Burst and collapse calculations
  
  
  • Wellheads
  
  
  
  


• Drilling System - Pressure Loss Calculations
  
  
  
  • Hydrostatics
  
  
  • Buoyancy
  
  
  • Flow through pipes and annuli
  
  
  • Flow path
  
  
  • Pressure loss calculations
  
  
  
  


• Drilling System - Bit & Nozzles
  
  
  
  • Hydrostatics Bit Types
  
  
  • Bit Parts
  
  
  • Bit Classification
  
  
  • Bit Nozzles
  
  
  
  


• Introduction to Well Control
  
  
  
  • Hydrostatics Definitions
  
  
  • Causes of kicks
  
  
  • Kick indicators
  
  
  • Shut-in procedure
  
  
  • Well Kill Procedures
  
  
  
  


• Directional Drilling
  
  
  
  • Reasons for directional wells
  
  
  • Planning Trajectory
  
  
  • Kickoff Methods
  
  
  • Survey Methods
  
  
  • Survey Calculations
  
  
  
  


• Health, Safety and Environmental Consideration in Drilling Operation
  
  
  
  • Peraturan Perundangan tentang K3L
  
  
  • Pengauh Gas Beracun pada Operasi Pemboran
  
  
  • Pengaruh  Gas Beracun Bagi Kesehatan
  
  
  • H2S
  
  
  • Gas Detection Equipments
  
  
  • Noise level & exposure in Oil Gas Industry
  
  
  • Noise Mapping
  
  
  
  

Course Leader

Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d'Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation & Dress Code

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner.


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Exclusive flash disk.

**) Optional

Tuition Fee & Registration  Deadline

IDR 8.250.000,-/ Person, Registration deadline a weeks before training held.

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

 

 

Total Productive Maintenance

Total Productive Maintenance

Bandung | April 26-29, 2011 | IDR 8.250.000,-/ Person
Bandung | May 03-06, 2011 | IDR 8.250.000,-/ Person
Jogjakarta | October 18-21, 2011 | IDR 8.250.000,-/ Person

 

BACKGROUND & OBJECTIVES

Total Productive Maintenance (TPM) can drastically improve maintenance strategy and efficiency achieved by industries. TPM can properly optimize the synergy between operators and plant equipment. Furthermore, TPM can also give contribution to the environmental conservation and work comfort ability. Many industries in United State of America and Japan have proven how well-implemented TPM in their industries, have given high cost saving, long lasting continuous operation, and health & safety program improvement.

This course will present the philosophy of TPM, including on how to implement that program in the company. It is expected that the participants can absorb comprehensive a lesson-learned regarding TPM, and implement the TPM concept and knowledge in their working environment to improve maintenance management, productivity leading to maximum plant availability with good safety

 

WHO SHOULD PARTICIPATE

• Maintenance Manager/ Superintendent/ Engineer/ Supervisor/ Planner


• Production Manager/ Superintendent/ Engineer/ Supervisor


• Plant Manager/ Superintendent/ Engineer/ Supervisor


• Everybody who wants to add knowledge and interest in the above subject

 

Outline Course

1. TPM in Process Industry

• History, development and definition of TPM


• Special aspect in process industry


• Management in process industry


• Basic activity of TPM development

2. Maximizing Production Effectiveness

• Production effectiveness in the industry


• Overall plant effectiveness


• Maximizing effectiveness of production input


• Continuous improvement

3. Directive Correction

• What is directive correction


• Lost and six major results


• Directive correction in practice


• Steps in directive correction


• Technical analysis for correction


• P-M analysis (phenomenon-mechanism)


• Malfunction reduction program


• Failure reduction program


• Process simplification program

4. Autonomous Maintenance

• Autonomous maintenance development program


• Un-separated Operation and Maintenance


• Classification and allocation of maintenance activity


• Definition of equipment base line condition


• Implementation steps of autonomous maintenance


• Preparation for main plan of autonomous maintenance


• Autonomous maintenance audit

5. Planned Maintenance

• Equipment management in process industry


• Planned-maintenance in process industry


• Planned-maintenance system


• Improvement of maintenance effectiveness


• Planned-maintenance implementation steps

6. Initial Management

• Requirement of initial management


• Equipment life cost


• Design of MP (maintenance prevention)


• Initial Management system


• Equipment initial management practice


• Control in commissioning


• Utilization of product design technology and MP design data

7. Qualified of Maintenance

• Qualified maintenance in process industry


• Qualified maintenance in TPM


• Initial condition of maintenance successfulness


• Basic element maintenance quality


• Qualified maintenance implementation


• Who should use qualified maintenance


• Quality improvement through initial management

8. Skill Training of Operation and Maintenance

• Couching and training in TPM


• Six steps to improve maintenance and operation ability

9. TPM at Administration and Support Section

• Requirement of TPM at administration and support section


• TPM implementation at administration and support section


• TPM promotion at administration and support section


• Job function improvement


• Directive improvement


• Administration of autonomous maintenance

10. Safe and Environmental Friendly System

• TPM and management of safety and environmental


• No accident and pollution


• Strategic key to zero accident and pollution


• Steps to zero accident and pollution


• Sample of audit


• Specific strategy to zero accident and pollution

11. Small Group Activity in TPM

• TPM small group activity characteristic


• Function and operation of TPM small group


• Role of small group at each level

12. TPM Effectiveness Measurement

• Philosophy to define objective


• Measure TPM effectiveness


• Type of indicator


• TPM Evaluation


• Benefit Measure of TPM

Course Leader

DR. IR. Tri Yuswijayanto Zaenuri is an expert in Combustion Engine, Propulsion System and Fluidal Mechanic, who has a career in this engineering field for more than 15 years. He graduated from mechanical engineering, Institut Teknologi Bandung in 1987 and continued his study in Technische Universitaet Clausthal, Clausthal-Zellerfeld, Germany until he got the "Doktor Ingenier" (Dr.Ing) title in Tribology and Kinematics (Reibungstechnik und Maschinenkinetik) on 2000. He is the Head of Combustion Engine and Propulsion System Laboratory in Institut Teknologi Bandung. He is active in projects that arranged by the cooperation with educational institutions, government and private company.

 

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

 

Documentation & Dress Code

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner.


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

 

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Exclusive flash disk.

 

**) Optional

 

Tuition Fee & Registration  Deadline

IDR 8.250.000,-/ Person, Registration deadline a weeks before training held.

 

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

 

Total Quality Management (TQM) for Achieving Excellence in Quality

Total Quality Management (TQM) for Achieving Excellence in Quality
Grand Seriti Hotel / Banana Inn Hotel Bandung | Monday-Tuesday, 30th-31st May 2011 | 09.00 AM – 04.00 PM | Rp.2.650.000,- per participant

 

Pengantar Pelatihan :

Persaingan bisnis yang sangat ketat telah menjadikan kualitas (Quality) tidak saja sebagai salah satu faktor yang penting, namun juga membuat kualitas menjadi anak kunci untuk bisa terlibat dalam persaingan tersebut. Banyak kasus yang telah menunjukkan dan membuktikan kebenaran dari pernyataan diatas. Total Quality Management (TQM) merupakan suatu pendekatan manajemen yang menjadikan kualitas sebagai strategi yang signifikan, dengan cara melibatkan secara aktif semua karyawan dalam meningkatkan pencapaian kualitas secara kontinu (Continuous Improvement) dan sepenuhnya berfokus pada kepuasan konsumen (Customer Satisfaction).

Dengan implementasi TQM, kualitas akan ditingkatkan secara berkesinambungan dan selalu disesuaikan dengan kebutuhan dan harapan dari konsumen. Ini akan menjadikan TQM sebagai bagian penting dari pencapaian daya saing perusahaan.

 

Sasaran Program :

Setelah mengikuti training dan workshop ini, maka diharapkan

1.  Peserta mampu memahami definisi dan konsep dari TQM.
2.  Peserta mampu memahami elemen-elemen dan manfaat dari TQM.
3.  Peserta memahami dan menguasai strategi implementasi dan dapat berperan aktif dalam implementasi TQM

 

Pelatihan Ini Sangat Penting Bagi :

Diharapkan berasal dari Manager dan Supervisor dari tiap bagian di perusahaan.

 

Topik Bahasan :

• The Basic Concepts of TQM.


• The Key Elements of TQM.


• Process Management in TQM.


• Implementing TQM.

 

Method of Training

Training dan workshop ini disajikan dan disampaikan dalam bentuk ceramah, diskusi, dan simulasi proses perakitan.

 

Course Instructors:

• SACHBUDI ABBAS RAS, M. Eng
  Education = August 2002, M. Eng, Industrial Engineering, Bandung Institute of Technology February 1999, B. Eng Industrial Engineering, Bandung Institute of Technology Teaching. Experience = 2001-Now = Courses: Introduction to Industrial Engineering, Quality Engineering, Operational Research, Reliability Engineering, Production Planning and Control, Industrial Statistics, Product Design and Development, etc. At: Indonesian Computer University (Bandung), University of Trisakti (Jakarta), University of INDONUSA Esa Unggul (Jakarta). May 28th-29th 2004, Intructor, National Workshop on Quality Engineering, University of Trisakti (Jakarta). Work Experience: 2003-Now : Head of Production System Laboratory Industrial Engineering Department, University of INDONUSA Esa Unggul 2001-2002 : Quality Engineering Supervisor PT. Starlink Indonesia. List of Client : Chevron Pacific Indonesia, Wijaya Karya, GAC Samudera Groups, LG Electronics Indonesia, Sanyo Energi Batam, Akzo Nobel Cars Refinishes, Mattel Indonesia, Molten Aluminium, Biro SDM Bappenas, Terralog Indonesia, Ditjen Bina Marga, etc.

 

Venue :

• Harris Hotel Tebet / Aryaduta Semanggi Hotel /Ibis Arkadia Hotel


• Grand Seriti Hotel / Banana Inn Hotel Bandung

 

Date :

• Monday-Tuesday, 30th-31st May 2011 | 09.00 AM – 04.00 PM

 

Investasi

May

• Rp. 2.000.000,- per participant (Group Price) Min 3 Participants


• Rp. 2.650.000,- per participant (Full Fare Price)


• Rp. 2.400.000,- per participant (Early Bird Price) Lunas 7 Hari Sebelum Training


• SPECIAL !!!  Kirim 4 Peserta, Gratis Peserta Ke-5

 

Include

• 1 Kali Makan Siang


• 2 Kali Coffee Break


• Tas Ransel


• Organizer Book


• Marker


• Seminar Kit


• Makalah Training


• Sertifikat


• CD Materi Presentasi Training


• Trainer yang Berkualitas

 

Sampling Penerimaan dan Kapabilitas Proses

Sampling Penerimaan dan Kapabilitas Proses

Harris Hotel Tebet / Ibis Hotel , Jakarta | Saturday, 14th May 2011 | 09.00 AM – 04.00 PM | Rp. 1.350.000,-per participant

PENGANTAR PELATIHAN :

Dasar dari semua program Quality Control and Optimization adalah pada analisis terhadap data dari proses yang ada, dengan demikian hasil dari analisis yang dilakukan haruslah benar-benar bermakna bagi proses bersangkutan. Point kritikal yang muncul adalah bagaimana cara merepresentasikan proses yang demikian kompleks kedalam ukuran-ukuran yang masih bisa dikelola dengan baik.

Acceptance Sampling Plan adalah standar yang umum digunakan di industri dan terbukti efektif dalam menentukan dan menganalisis jumlah pengukuran yang harus dilakukan dari proses.

 

SETIAP PESERTA DIHARAPKAN MEMBAWA LAPTOP UNTUK PRAKTIK

 

Sasaran Program :
Setelah mengikuti training dan workshop ini, maka diharapkan

1. Peserta mampu memahami konsep dasar dari Acceptance Sampling.


2. Peserta mampu memahami konsep dan metode dari Kapabilitas Proses.


3. Peserta mampu menguasai dan memahami mekanisme dari Acceptance Sampling System MIL STD 105E.


4. Peserta memahami dan menguasai analisis dari Acceptance Sampling secara komprehensif dengan menggunakan software.

 

Pelatihan Ini Sangat Penting Bagi :
Diharapkan berasal dari Manager dan Supervisor yang terkait dengan Quality.

 

Topik Bahasan :
Training dan workshop ini disusun penyajian dan penyampaiannya secara terstruktur sebagai berikut :

1. PENGANTAR SAMPLING PENERIMAAN.


2. SINGLE-SAMPLING PLANS.


3. OTHER-SAMPLING PLANS.


4. MIL STD 105E.


5. STABILITAS PROSES DAN KAPABILITAS PROSES.

Method of Training
Training dan workshop ini disajikan dan disampaikan dalam bentuk ceramah, diskusi, dan latihan dengan software.

 

Course Instructors

SACHBUDI ABBAS RAS, M. Eng
Education = August 2002, M. Eng, Industrial Engineering, Bandung Institute of Technology February 1999, B. Eng Industrial Engineering, Bandung Institute of Technology Teaching. Experience = 2001-Now = Courses: Introduction to Industrial Engineering, Quality Engineering, Operational Research, Reliability Engineering, Production Planning and Control, Industrial Statistics, Product Design and Development, etc. At: Indonesian Computer University (Bandung), University of Trisakti (Jakarta), University of INDONUSA Esa Unggul (Jakarta). May 28th-29th 2004, Intructor, National Workshop on Quality Engineering, University of Trisakti (Jakarta). Work Experience: 2003-Now : Head of Production System Laboratory Industrial Engineering Department, University of INDONUSA Esa Unggul 2001-2002 : Quality Engineering Supervisor PT. Starlink Indonesia.

 

Venue :

Harris Hotel Tebet / Ibis Hotel Jakarta

 

Date :

Saturday, 14th May 2011 | 09.00 AM – 04.00 PM

 

Investasi

• Rp. 1.000.000,- per participant (Group Price) Min 3 Participants


• Rp. 1.350.000,- per participant (Full Fare Price)


• Rp. 1.100.000,- per participant (Early Bird Price) Lunas 7 Hari Sebelum Training

 

Include

• 1 Kali Makan Siang


• 2 Kali Coffee Break


• Tas Ransel


• Organizer Book


• Marker


• Seminar Kit


• Makalah Training


• Sertifikat


• CD Materi Presentasi Training


• Trainer yang Berkualitas

 

Statistical Process Control (SPC)

Statistical Process Control (SPC)

Hotel Amaris Cihampelas, Bandung | 18-20 Mei  (Rabu-kamis) | Rp 7.500.000,

 

Deskripsi:

SPC  merupakan suatu teknik untuk mengontrol sebuah process berdasarkan statistik, sehingga bisa dikatakan SPC merupakan bagian terpenting dalam sistem kualitas, sebab kualitas memiliki standar-standar baku yang harus dikontrol. SPC bisa pula dikatakan sebuah alat untuk menjaga agar proses tetap sesuai dengan standar-standar, sehingga kualitas tetap sesuai dengan persyaratan pelanggan

Proses apapun pasti memiliki variasi dari output yang dihasilkan, yang sebenarnya diakibatkan oleh opersionalisasi proses bersangkutan. Variasi sangat tidak diinginkan dan menimbulkan permasalahan bilamana menyebabkan banyak output yang tidak sesuai dengan spesifikasi yang telah ditetapkan.

Statistical Process Control (SPC) adalah seperangkat tool yang umum digunakan diindustri dan telah terbukti efektif dalam mengendalikan dan mengurangi variasi yang ada didalam proses. Kesetabilan prose ini akan perlu dilanjutkan dengan analisis terhadap kapasitas proses dalam memenuhi spesifikasi.

 

Materi:

• Introduction of Statistical Process Control (SPC)


• Process Capability Analyze


• Pemahaman dan penguasaan proses dengan Flow-Chart


• Konsep Measurement System Analysis (MSA)


• Pengumpulan data dengan Check-Sheet


• Visualisasi data dengan Histogram


• Verifikasi hubungan antar variabel (atau parameter) dengan Scatter Diagram


• Prioritas permasalahan yang perlu ditangani dengan Pareto Diagram


• Pencarian akar penyebab permasalahan dengan Couse-and-effect diagram


• Monitoring dan pengendalian proses dengan control chart.


• Komputasi kapabilitas proses dengan Capibility Analysis.

 

 

Tujuan:

1. Diharapkan peserta dapat meningkatkan daya saing produksi dengan menekan terjadinya variasi.


2. Mengurangi biaya-biaya yang seharusnya tidak perlu dikeluarkan, misalnya : rework cost, sorting cost, Punishment cost akibat customer complaint, dll.


3. Meningkatakan mutu bahan dan material yang dibeli melalui penerapan Incoming Inspection.


4. Meningkatkan produktivitas dengan menekan persentase cacat, kesalahan ataupun rework.

 

Peserta

Supervisor, Staf Bagian Logistic, Bagian pembelian, Bagian Pergudangan dan yang terkait dengan Manajemen Logistic

 

Instruktur:

Dwi Larso, Ph.D.

Lecturer at School of Business and Management ITB for Undergraduate Program, MBA and MSM (Master of Science in Management). Director of CIEL (Center for Innovation, Entrepreneurship and Leadership) SBM ITB.Committee Chair for Developing the Curriculum of Integrative Business Experiences at the School of Business and Management – ITB.Committee Chair for Developing a Business Plan for the Health Center Service at ITB, Research Staff at the Center for Industrial Policy Studies at ITB, Chief Of Competitiveness Index Development in Jawa Barat, Member of  Organizing Committee for Ikatan Alumni ITB Jawa Barat, Member of  Working Group for Automotive Parts Industry Develoment At Jawa Barat, Consulting and trainer for creative industry and small businesses

 

Waktu dan tempat:

• Hotel Amaris Cihampelas


• Jl. Cihampelas 171 Bandung


• 18-20 Mei  (Rabu-kamis)


• 08.00– 16.00 WIB

 

Investasi:

• IDR 7.500.000,-/peserta


• Pengiriman 3 peserta dari perusahaan yang sama IDR 7.000.000,-peserta (non residensial)

 

Fasilitas:

• Meeting room hotel (***)


• Training Kit


• Coffe Break And Lunch


• Special dinner in the las day


• Sertifikat


• Excusif Souvenir

 

Statistical Process Control (SPC)

Statistical Process Control (SPC)

Hotel Amaris Cihampelas, Bandung | 18-20 Mei  (Rabu-kamis) | Rp 7.500.000,

 

Deskripsi:

SPC  merupakan suatu teknik untuk mengontrol sebuah process berdasarkan statistik, sehingga bisa dikatakan SPC merupakan bagian terpenting dalam sistem kualitas, sebab kualitas memiliki standar-standar baku yang harus dikontrol. SPC bisa pula dikatakan sebuah alat untuk menjaga agar proses tetap sesuai dengan standar-standar, sehingga kualitas tetap sesuai dengan persyaratan pelanggan

Proses apapun pasti memiliki variasi dari output yang dihasilkan, yang sebenarnya diakibatkan oleh opersionalisasi proses bersangkutan. Variasi sangat tidak diinginkan dan menimbulkan permasalahan bilamana menyebabkan banyak output yang tidak sesuai dengan spesifikasi yang telah ditetapkan.

Statistical Process Control (SPC) adalah seperangkat tool yang umum digunakan diindustri dan telah terbukti efektif dalam mengendalikan dan mengurangi variasi yang ada didalam proses. Kesetabilan prose ini akan perlu dilanjutkan dengan analisis terhadap kapasitas proses dalam memenuhi spesifikasi.

 

Materi:

• Introduction of Statistical Process Control (SPC)


• Process Capability Analyze


• Pemahaman dan penguasaan proses dengan Flow-Chart


• Konsep Measurement System Analysis (MSA)


• Pengumpulan data dengan Check-Sheet


• Visualisasi data dengan Histogram


• Verifikasi hubungan antar variabel (atau parameter) dengan Scatter Diagram


• Prioritas permasalahan yang perlu ditangani dengan Pareto Diagram


• Pencarian akar penyebab permasalahan dengan Couse-and-effect diagram


• Monitoring dan pengendalian proses dengan control chart.


• Komputasi kapabilitas proses dengan Capibility Analysis.

 

Tujuan:

1. Diharapkan peserta dapat meningkatkan daya saing produksi dengan menekan terjadinya variasi.


2. Mengurangi biaya-biaya yang seharusnya tidak perlu dikeluarkan, misalnya : rework cost, sorting cost, Punishment cost akibat customer complaint, dll.


3. Meningkatakan mutu bahan dan material yang dibeli melalui penerapan Incoming Inspection.


4. Meningkatkan produktivitas dengan menekan persentase cacat, kesalahan ataupun rework.

 

Peserta

Supervisor, Staf Bagian Logistic, Bagian pembelian, Bagian Pergudangan dan yang terkait dengan Manajemen Logistic

 

Instruktur:

Dwi Larso, Ph.D.

Lecturer at School of Business and Management ITB for Undergraduate Program, MBA and MSM (Master of Science in Management). Director of CIEL (Center for Innovation, Entrepreneurship and Leadership) SBM ITB.Committee Chair for Developing the Curriculum of Integrative Business Experiences at the School of Business and Management – ITB.Committee Chair for Developing a Business Plan for the Health Center Service at ITB, Research Staff at the Center for Industrial Policy Studies at ITB, Chief Of Competitiveness Index Development in Jawa Barat, Member of  Organizing Committee for Ikatan Alumni ITB Jawa Barat, Member of  Working Group for Automotive Parts Industry Develoment At Jawa Barat, Consulting and trainer for creative industry and small businesses

 

Waktu dan tempat:

• Hotel Amaris Cihampelas


• Jl. Cihampelas 171 Bandung


• 18-20 Mei  (Rabu-kamis)


• 08.00– 16.00 WIB

 

Investasi:

• IDR 7.500.000,-/peserta


• Pengiriman 3 peserta dari perusahaan yang sama IDR 7.000.000,-peserta (non residensial)

 

Fasilitas:

• Meeting room hotel (***)


• Training Kit


• Coffe Break And Lunch


• Special dinner in the las day


• Sertifikat


• Excusif Souvenir

 

TEKNIK KALIBRASI SUHU

TEKNIK KALIBRASI SUHU

Lab LIPA Jl. Singaperbangsa No 2  Bandung| 27 – 28  April  2011 | 08.30-16.30 WIB | Rp 2.700.000,-
Lab LIPA Jl. Singaperbangsa No 2  Bandung| 22 – 23 Juli 2011 | 08.30-16.30 WIB | Rp 2.700.000,-
Lab LIPA Jl. Singaperbangsa No 2  Bandung| 16 – 17 September 2011 | 08.30-16.30 WIB | Rp 2.700.000,-

 

Description:

Pelatihan ini dimaksudkan untuk memberi pemahaman tentang Konsep dan Implementasi Kalibrasi serta tentang Teknik Kalibrasi Suhu (Termometer) dalam lingkup Metrologi Teknis dan mengacu pada metoda internasional.

Peserta akan mengerti tentang sistem kalibrasi yang benar dan dapat menerapkan teknik kalibrasi sesuai metoda/ prosedur yang lazim hingga pengolahan datanya maupun penerbitan sertifikat kalibrasinya. Disamping itu, dilengkapi dengan contoh-contoh implementasi dalam program computerize dan diberikan pula dokumentasi kegiatan kalibrasi secara tertib dan benar.

Pelatihan ditujukan  untuk laboratorium  kalibrasi serta laboratorium uji dan  industri yang ingin mengembangkan kalibrasi internal.

 

TOPIK BAHASAN :

1. Pengantar Sistem Pengukuran dan Kalibrasi


2. Prinsip & Persyaratan dalam Kalibrasi


3. Prosedur Teknik Kalibrasi


4. Praktek Pengambilan Data Kalibrasi


5. Pengolahan Data Kalibrasi & Laporan Hasil Kalibrasi


6. Estimasi “Ketidakpastian Pengukuran” Hasil Kalibrasi


7. Program Re-Kalibrasi dan Pengecekan Antara


8. Memahami Dokumentasi dalam kegiatan Kalibrasi dan isi Sertifikat Kalibrasi

 

TEMPAT dan WAKTU:
Waktu

• 27 – 28  April  2011 | 08.30-16.30 WIB


• 22 – 23 Juli 2011 | 08.30-16.30 WIB


• 16 – 17 September 2011 | 08.30-16.30 WIB

Tempat

Lab LIPA Jl. Singaperbangsa No 2  Bandung
01- 02 APRIL 2011

 

INVESTASI  :

• Rp 2.700.000,-


• (materi, makan  siang, 2x coffee break, sertifikat)


• Gratis : 1 peserta (ke-4) untuk pendaftaran 3 peserta dari  1 perusahaan

 

VERIFIKASI HASIL KALIBRASI & EVALUASI IMMEDIATELY CHECK STATUS KALIBRASI

VERIFIKASI HASIL KALIBRASI &  EVALUASI IMMEDIATELY CHECK STATUS KALIBRASI

Hotel Grand Preanger, Bandung |11 – 12 November  2011 | 08.30-16.30 WIB | Rp 2.700.000,-

 

Seminar/Conference Description :

Pelatihan ini dimaksudkan untuk memberi pembekalan dan pemahaman tentang Verifikasi Hasil kalibrasi dan Immediately Check (IC) Status Kalibrasi peralatan ukur, serta hal-hal yang berkenaan dengan rencana programnya dan teknik pelaksanaannya.

Peserta akan mengerti tentang pengetahuan yang terkait dengan Verifikasi Hasil kalibrasi danImmediately Check Status Kalibrasi peralatan ukur sehingga performa alat ukur dapat terpelihara, sebagaimana yang direkomendasikan dalam ISO/IEC 17025:2005.

 

TUJUAN PELATIHAN:

1. Memberi pembekalan & pemahaman tentang Konsep Ketidakpastian Pengukuran dan Perhitungan Estimasinya  (dalam kegiatan pengujian / pengukuran) yang mengacu pada standar ISO GUM dan Eurochem serta aplikasi praktisnya.


2. Memahami  pengetahuan yang terkait dengan Ketidakpastian Pengukuran.


3. Mampu  menghitung estimasi ketidakpastian pengukuran hasil uji/ hasil ukur secara sistematis dan praktis (dilengkapi dengan contoh-contoh implementasi dalam program computerize)


4. Peserta mengerti implementasi konkrit dari QC Laboratorium secara benar/ konsisten termasuk juga aplikasi statistiknya hingga Investigasi Data “out of control”  maupun Evaluasi untuk continual improvement.

 

Outline :

1. Pengantar metrologi & klasifikasi peralatan


2. Konsep mutu dan kalibrasi


3. Interpretasi hasil-hasil kalibrasi


4. Verifikasi sertifikat kalibrasi


5. Evaluasi trend hasil kalibrasi


6. Rekapitulasi hasil kalibrasi


7. Komparasi secara grafis


8. Implementasi  immediately check


9. Identifikasi peralatan ukuran untuk IC


10. Penyusunan program & jadwal untuk IC


11. Indikator performa & kriteria pemastian status kalibrasi


12. Evaluasi hasil  immediately check dan tindak Lanjutnya

 

Speaker :

Team Trainer

 

TEMPAT dan WAKTU:
Hotel Grand Preanger*
Jl. Asia Afrika No. 81 Bandung
11 – 12 November  2011 (08.30-16.30)

 

INVESTASI  :

• Rp 2.700.000,-


• (materi, makan  siang, 2x coffee break, sertifikat)


• Gratis : 1 peserta (ke-4) untuk pendaftaran 3 peserta dari  1 perusahaan

 

TEKNIK ANALISIS GAS CHROMATOGRAPHY (GC)

TEKNIK ANALISIS GAS CHROMATOGRAPHY (GC)

Hotel Grand Preanger, Bandung | 22 – 23 Juli  2011 | 08.30-16.30 WIB | Rp 2.900.000,-
Hotel Grand Preanger, Bandung | 30 September – 01 Oktober 2011 | 08.30-16.30 WIB | Rp 2.900.000,-
Hotel Grand Preanger, Bandung | 02 – 03 Desember 2011 | 08.30-16.30 WIB | Rp 2.900.000,-

 

Description:

Teknik analisis kromatografi merupakan salah satu teknik analisis instrumental kimia disamping teknik spektrofotometri dan elektroanalisis kimia. Lebih dari itu GC-MS dapat dipakai untuk menentukan massa atau berat molekul suatu senyawa dengan fragmentasinya sebagai salah satu analisis struktur atau elusidasi struktur.

Investasi besar dalam peralatan-peralatan diatas amat penting dalam menunjang misi laboratorium. Tetapi pemanfaatannya amat bergantung pada kemampuan sumber daya manusia. Kurangnya pemahaman teori dasar dan spektrum aplikasi serta pemeliharaan akan menyebabkan kurang optimal pemanfaatannya dan bahkan banyak peralatan yang idle atau rusak dan tidak bermanfaat. Dengan pelatihan ini diharapkan dapat membantu industri, laboratorium jasa, lembaga litbang dan perguruan tinggi dalam meningkatkan mutu tenaga laboratorium

 

TUJUAN PELATIHAN :

Pelatihan bertujuan meningkatkan kemampuan peserta dalam analisis kromatografi, baik pengetahuan dasar, keterampilan dalam penggunaan peralatan, dan aplikasinya, serta pemeliharaan. Dengan mendapatkan materi pelatihan ini diharapkan peserta dapat:

1. Mempunyai pengetahuan dasar dan keterampilan dalam menggunakan Gas Chromatography (GC).


2. Mengetahui kelebihan dan keterbatasan serta cara memperolah data yang handal dari berbagai cara teknik kromatografi.

Mempunyai kesadaran dan menguasai teknik pemeliharaan agar peralatan mempunyai umur pakai yang memadai

 

OUTLINE

1. Tinjauan umum : Spektrum Teknik Analisis Gas Chromatography dan Aplikasinya.


2. Teori dasar Gas Chromatography, dan aplikasi.


3. Peralatan Gas Chromatography

 

TRAINER

Team Trainer

 

TEMPAT dan WAKTU:
Waktu

• 22 – 23 Juli  2011 | 08.30-16.30 WIB


• 30 September – 01 Oktober 2011 | 08.30-16.30 WIB


• 02 – 03 Desember 2011 | 08.30-16.30 WIB

Tempat

Hotel Grand Preanger
Jl. Asia Afrika No. 81 Bandung

 

INVESTASI  :

• Rp 2.900.000,-


• (materi, makan  siang, 2x coffee break, sertifikat)


• Gratis : 1 peserta (ke-4) untuk pendaftaran 3 peserta dari  1 perusahaan

 

2011-07-22

BIOREMEDIATION: Updating of Technology and Application

BIOREMEDIATION: Updating of Technology and Application

Bandung|July 12-15 2011 | IDR 8.250.000,-/ Person

In this practical course (3-day in-class training combining with 1-day field and laboratory practice), participants will learn from and discuss with professional instructors about the following subjects:

• Detail aspect of bioremediation.


• Microbial process as the key factor in the bio degradation


• Sophisticated ex-situ and in-situ bioremediation technique for hazardous organic pollutants such as oil sludge, solvent or pesticides (as halogenated compounds).


• Application of bioremediation technique for treatment of industrial waste.


• Selecting appropriate bioremediation technique for certain conditions.


• Waste problem solving in oil and gas industry.


• Newest microorganism species, which is the most effective for bioremediation technology.

 

Crucial Benefits from attending:

• Get the clearer understanding of bioremediation technique.


• Strengthen your perspective on handling your oil spill, sludge and waste problems.


• Improve the capability of your company on environmental protection including immediate action on any oil spill, leak, and accidental spillage.

 

Who Should ATTEND?

Petroleum Engineer, Environmental Engineer, Chemistry Engineer, Production Engineer, Supervisor and Manager in mining and petrochemical industry, anyone who has relation and responsible to environmental recovery and restoration.

 

Instructors:

Dr. Edwan Kardena is a leading scientist and engineer in the field of microbial process for bioremediation of organic and toxic chemicals, such as petroleum hydrocarbons and halogenated compounds. He obtained his Ph.D. degree from the University College of Wales in Cardiff, United Kingdom in the field of Environmental Microbiology/Biotechnology in 1995. He is currently known as a lecturer in the Department of Environmental Engineering ITB.

Dr. Sri H. Suhardi is an environmental microbiologist and currently known as a researcher at the Inter University Center for Research on Biotechnology. Her major interest is in the use of fungi and biocatalyst for treatment of industrial waste. She has extensively been working with phenolic compounds such as chlorophenol. She got her Ph.D. degree from University of Kent at Canterbury, United Kingdom in 1995.

They have been participating on various courses organized by the government such as BAPPEDAL, PUSARPEDAL, PEMDA, etc.  Both of them are consultant and team mate in doing a lot of training project at multinational companies, such as Chevron Pacific Indonesia, ExxonMobil Oil Indonesia, Vico Indonesia, Total E&P Indonesie, ConocoPhillips Indonesia Limited, Chevron Indonesia Company, PetroChina, Pertamina, Petronas, Freeport, etc.

General Information

 

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

 

Documentation

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.


• Casual clothing is recommended. The training atmosphere is informal.

 

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included calculator, T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Convenient training facilities with five star quality


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Local drop and pick up for arrival and departure between airport to hotel.


• Half day city tour at the end of training session following by dinner with entertainment  (Optional)


• Exclusive flash disk.

 

Tuition Fee & Registration  Deadline

• IDR 8.250.000,-/ Person


• Registration deadline a weeks before training held.

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

MANAJEMEN DAN AUDIT EFISIENSI ENERGI LISTRIK

MANAJEMEN DAN AUDIT EFISIENSI  ENERGI LISTRIK (Two Days Training)

Hotel Ibis,Jogjakarta| 18 – 19  Mei  2011|Rp. 3.000.000 per Peserta
Hotel Ibis,Jogjakarta| 15  Juni  – 16 Juni 2011 |Rp. 3.000.000 per Peserta
Hotel Ibis,Jogjakarta|27 -28 Juni 2011 |Rp. 3.000.000 per Peserta

Deskripsi

Energi listrik merupakan energi yang sangat vital dalam  operasional perusahaan. Hampir semua peralatan dan sumber penerangan  yang digunakan berasal dari energi listrik . Namun dalam pemakaiannya  banyak dikeluhkan adanya ketidak-efisiensian energi listrik ini. Hal ini terbukti dari membengkaknya tagihan listrik yang harus dibayarkan perbulannya.  Terlebih apabila ini terjadi dilingkungan kantor atau perusahaan maka akan mengakibatkan anggaran biaya yang cukup besar.

Tingkat efisiensi pemakaian listrik di pengaruhi oleh daya listrik yang terpasang, aktivitas yang dilakukan,jenis peralatan yang terpasang dan rata-rata pemakaian listrik perhari/per bulan.Untuk mengefisiensikan pemakaian listrik, maka perlu dilakukan manajemen audit energi listrik dimana dengan audit tersebut akan didapatkan potret pengunaan energi listrik pada suatu bangunan, mengetahui kondisi peralatan yang terpasang dan mengetahui peluang untuk penghematan energi. Keberhasilan program efisiensi pemakain energi listrik, selain dipengaruhi oleh faktor teknis juga sangat bergantung pada komitmen manajemen puncak dan komitmen seluruh karyawan dalam gerakan efisiensi.

 

Tujuan dan Manfaat

1. Peserta pelatihan memahami prinsip- prinsip penerapan penghematan energi di perusahaan masing-masing.


2. Peserta pelatihan mampu mengenali potensi-potensi penghematan energi di perusahaan masing-masing.


3. Peserta pelatihan mampu membuat langkah – langkah program penghematan energi

 

Materi

1. Karakteristik penggunaan energi di bangunan gedung.


2. Strategi  Penghematan Energi listrik


3. Perencanaan Program Penghematan Energi


4. Audit energy


5. Pembentukan tim penghematan energi  dan Pengkajian sumber penggunaan energi


6. Membangun budaya  gerakan efisiensi pemakaian listrik


7. Studi kasus penerapan program penghematan energi

 

Peserta

Pelatihan ini ditujukan bagi manajer,kepala bagian umum,kepala bagian sarana dan prasarana, dan seluruh staf perusahaan  yang terkait dengan pemakaian energi  listrik

 

Metode

Presentasi, Diskusi , Brainstorming, Case Study,Evaluasi

 

Waktu  Dan Tempat

• 18 – 19  Mei  2011


• 15  Juni  – 16 Juni 2011


• 27 -28 Juni 2011


• Hotel  Ibis,Malioboro, Yogyakarta

Investasi dan Fasilitas

• Rp.3.000.000 (Non Residential)


• Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir


• Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel

 

Instruktur

IR. Suprapto.MT

Memiliki pengalaman luas sebagai praktisi dan  trainer di bidang  Electricity Maintenance.