NATURAL GAS PROCESSING - FRACTINATION AND REFREGERATION

NATURAL GAS PROCESSING - FRACTINATION AND REFREGERATION

Hotel Golden Flower Bandung |13 – 17 December 2010 | Rp  7.450.000/person

 

INTRODUCTION, GOAL AND OBJECTIVE

The training material subjects are covered: physical properties, phase equilibria and  vapour liquid equilibrium calculations, water-hydrocarbon systems, natural gas gathering and plant inlet separation, acid gas treating/sweetening, dew  point control and natural gas liquids recovery. The training is designed primarily for engineers and technologists involved in the design, operation, and optimization of gas processing facilities. This training is designed to familiarize technical professionals with the design and operation of propane refrigeration loops used in typical NGL recovery and/or dewpoint control facilities, with an emphasis on design, troubleshooting and performance optimization. A working knowledge of gas compression is required. The principles of natural gas liquids fractionation and cryogenic expander operation are also discussed, including LNG and LPG operations and power recovery from LNG import terminals.

 

TRAINING MATERIAL OUTLINE

Day 1

Physical Properties

1. Phase Equilibria and Vapour Liquid Equilibrium Calculations


2. Natural Gas Gathering and Plant Inlet Separation


3. Problem Solving Session:
   
   
   1. Oil Characterization
   
   
   2. Gas Gathering
   
   


4. Dew Point Control and Natural Gas Liquids Recovery


5. Gas Plant Process Dynamics and Control of Critical Loops


6. Problem Solving Session:
   
   
   1. Refrigerated Gas Plant
   
   
   2. Natural Gas Liquids Fractination
   
   
   3. Gas Plant Dynamics
   
   

Day 2

1. Water-Hydrocarbon Systems and Natural Gas Dehydration


2. Acid Gas Treating and Sweetening


3. Problem Solving Session:
   
   
   1. Natural Gas Dehydration with Glycols
   
   
   2. Acid Gas Sweetening with Amines
   
   

Day 3-4-5

Fractination and processing

1. Principles of Distillation


2. Vapour-Liquid Equilibrium


3. Mechanics


4. Characteristics of Good Distillation


5. Column Design Principles, Including Control Strategies


6. Case : Methanol Bunyu Process and


7. Troubleshooting

 

PARTICIPANTS

• New Engineering graduates and Technologists who need to develop an  understanding of Natural Gas Processing Principles and Technology.


• Professionals who have been working in industry but are new to Natural Gas Processing.


• Professionals who are familiar with Natural Gas Processing but are  unfamiliar with how process simulators can be used to improve plant  design and optimize plant profitability.

 

INSTRUCTOR

Ir. Sudiharto, MT,  is alumnus from Bandung Institute of Technology (ITB) department of petroleum engineering. Ir. Sudiharto besides as instructor and researcher at Geothermal Laboratory ITB, he is also being as Production Engineer at LAPI ITB, Production & Reservoir Analist and  expert board (Dewan Pakar) at Forum Komunikasi Daerah Penghasil Migas, and joining in Community Development Team Dirjen Migas since 2003.

Some projects have been handled by him such as policy analysis expert on oil and gas subsector, oil and gas production expert, and field economicity such as: projection study investation potency energy and mineral resources, implementation study national energy consumtion, study on field use of Brownfield in Indonesia, inventarization research of old well potential in regency of Muaro Jambi,  blueprint arrangement manpower on oil and gas subsector, development operation cost estimation system oil and gas: geological and geophysical stage, study of combustion flare gas at PERTAMINA DOH Jawa Bagian Barat, survey and development of GIS based datas for planning and distribution BBM  and transportation gas through pipe, study on planning of Indonesia – Asean pipeline system, etc. Ir. Sudiharto have trained for training class for many companies in Indonesia. Some topics that have been frequently delivered by him as follows :

1. Electric Submercible Pump, Problem and Trouble Shooting Mecanism


2. Crude Oil Analysis


3. Drilling, Production and Workover Strategy


4. Well Workover and Completion Stretegy


5. Petroleum Finance, Acconting and Reservoir Management


6. Plan of Development in Oil and Gas Industries


7. Pressure Control for Drilling Engineer


8. Plan of Development (POD) & Authorization For Expenditures (AFE)


9. Management Skills Secretary Petroleum Gas and Oil Industries


10. Pressure Transient Analysis and Well Testing Data Interpretation


11. Oil Production System and Operation


12. Formation Damaged and Well Stimulation


13. Simulasi Reservoir for Petroleum Engineer


14. Oil and gas transportation/measurement, etc

 

VENUE

Hotel Golden Flower Bandung

 

TRAINING DURATION

5 days

 

TRAINING TIME

13 – 17 December 2010

 

INVESTATION PRICE/ PERSON

1. Rp 7.450.000/person (full fare)  or


2. Rp 7.250.000/person (early bird, payment before 6 December 2010) or


3. Rp 6.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)