Power Electronics Course

Power Electronics Course

Golden Flower Hotel, BANDUNG | September  28 – October 01, 2010 | US$ 990.00/person

BACKGROUND

Power electronics have become an important discipline in electrical engineering. Basically, power electronics is a discipline that deals with control and conversion of electrical power.  The use of power electronics in industries is growing tremendously in the recent years. Power electronics are used in power generation, power transmission and distribution, and in the power utilization. In power generation, power electronics have been used since a long time ago in automatic voltage regulator (AVR) and excitation system of synchronous generators. In power transmission and distribution, power electronics have been used as static VAR compensators and recently as active power conditioners. In the utilization side, there are so many applications that ranging from several kW to several MW. It used in variable speed drives, uninterruptible power supplies (UPS), induction heating, electric welding, dc power supplies, battery chargers, and soft starters.  In all of these applications, high efficiency operation is the basic requirement.

Though power electronics can be used to increase the plant productivity and reliability and also to improve the product quality, power electronics based equipment may bring a problem if it is not applied properly. Switching operations of power electronics may bring harmonic problems.

The wide and vast applications of power electronics in industries have made the management to prepare engineers and technicians that aware and understand this technology.  How to apply and maintain equipment based on this technology has become very important.

COURSE OBJECTIVE

Upon the completion of this training, you will able to:

• Describe the power electronics components


• Describe the operation of rectifiers, inverters, dc-dc converters, and ac-ac converters


• Describe the control methods for rectifiers, inverters, dc-dc converters, and ac-ac converters.


• Maintain and troubleshoot the equipment based on power electronics.

WHO SHOULD ATTEND THIS COURSE?

Industrial engineers and technicians that involve in designing, specifying, operating, and maintaining equipment based on power electronics should attend this course. No special backgrounds are required to attend this course.

Course Method and Outline

The course on power electronics is conducted by combining a class tutorial and laboratory experiments. Laboratory experiments are considered important because practical experiences are necessary to mastering the power electronics.  The use of computer software to analyze a power electronic circuit is also introduced.

The course outline is as follows:

Rectifiers. The output and input characteristics are discussed thoroughly. Harmonics and power factor problems that generated by rectifiers are discussed. PWM rectifiers and unity power factor rectifiers are also introduced

AC-AC CONVERTERS

The most common applications of ac-ac converters are lamp dimmers, soft-starters, static ac switches, and static VAR compensators.  In this session, the basic characteristics of ac-ac converters are discussed. The ac-ac converters those will be discussed are ac voltage regulators and cycloconverters. Harmonic characteristics of ac-ac converters are also emphasized.

DC-DC Converters

Dc-dc converter is commonly used in a dc switch mode power supply.  The needs of smaller and smaller dc power supplies have made the technology of this converter is growing very fast. Understanding of this technology is also useful to understand the operation of inverters. Isolated and nonisolated dc power supplies will be discussed in this session.

Inverters

An inverter is commonly used in a variable speed drives and UPS. At present, most of inverter is controlled by a pulse width modulation (PWM) technique. A lot of PWM techniques have been proposed in the literature. In this session, the basic characteristics and control methods of inverters are discussed. Applications of inverters as rectifiers, SVC, and active power conditioners are discussed. By using a PWM technique, an inverter can be controlled as a variable-voltage variable-frequency ac source.

Applications of Power Electronics

In this session, applications of power electronics are discussed. AVR, excitation system, variable speed drives, UPS, battery chargers, and ac voltage regulators are discussed. The basic characteristics of each application are treated thoroughly. Special emphasizes are given to variable speed drives and UPS. Practical application considerations are also emphasized. New applications of power electronics are also introduced.

Troubleshooting and Maintenance

In this session, a practical method to do a troubleshooting is introduced. A special practical experiment has been designed for this purpose. The use of computer software in troubleshooting is also introduced. Ho to maintain power electronic equipment is also discussed.  How to solve harmonic and power factor problems are also introduced.

Instructor:

Dr. Pekik Argo Dahono and TEAM

ABOUT COURSE LEADER

Pekik Argo Dahono is a Doctor of Enginering Degree from Department of Electrical an Electronic Engineering, Tokyo Institute of Technology, Japan. Prior to receiving Doctor Degree, he completed his Master Degree in the same university in 1992. He finished his Bachelor Degree at Department of Electrical Engineering, Institute of Technology Bandung (ITB) in 1985.

Besides formal education, he also followed non degree programs: Power Quality, EDSA Short Course Program in Detroit, Transient Analysis of Electric Drives Short Course in Singapore, Electric Traction Engineering, IEEE Short Course in Hongkong, Demand Side Management, AIT Short Course in Bangkok, Multilevel Conventers, IEEE Short Course in Aachen.

Pekik Argo Dahono conducts major teaching and research programs in Power Electronics, Application of Electrical Machinery, Control of Static Power Converters, Control of Electrical Machinery, Signal and System, Power Quality etc. He is a Head of Electrical Energy Conversion Research Laboratory, Institute of Technology Bandung since 2001.

He has a numerous experience as a Project Director and Consultant, such as Power System Study at Petrochina Ltd, Life Assessment of Synchronous Generator at PT. Geodipa Energy, Electric Fire, Investigation at Soekarno Hatta Airport, Industrial Power System Study at PT. Pertamina Tanjung, Variable Speed Drives Problem Assessment at PT. Chevron Pacific Indonesia, etc.

He has received numerous awards both Domestic and outside the country: Conference Paper Awar from IEE Japan in 1992, scientific writing competition winners among Indonesian students in Japan in 1994, Japan Society for Promotion of Science Research Awards in 1997, Hitachi Kimmai Fellowship Awards in 1997, Toray Research Fellowship Awards in 1998, Asahi Glass Research Awards in 1998, PII Engineering Awards in 2006, ASEAn Engineering Achievement Awards in 2006 and recently he got STEI Awards. He is also a membership of IEEE and IEE Japan.

Registration Fee

• Registration Deadline: September 20, 2010


• US$ 990.00/person from 1 (one) Company


• US$ 880.00/person for more than 3 (Three) Participants from 1 (one) Company

Fee includes the following:

• Four-day registration fee for all Training sessions (Class Session + Laboratory Experiments)


• Lunch per day


• Daily coffee/tea breaks


• Integrated Quality Training Materials (SOFTCOPY AND HARDCOPY)


• Quality Training Kits,


• Convenient Training Facilites,


• Certifícate of  Compleción.

ELECTRONIC ENGINE DIAGNOSTIC TOOLS

ELECTRONIC ENGINE DIAGNOSTIC TOOLS

Aryaduta Hotel / Grand Flora Hotel*, Jakarta | October 13th - 14th, 2010 | Rp. 2.950.000, -  (Full Fare)

 

Kemajuan teknologi yang signifikan memberikan banyak kemudahan dan meningkatkan efisiensi yang jauh lebih baik dari sebelumnya, peralihan dari zaman mesin mekanis ke era computerized kontrol engine sedikit banyak membawa masalah baru yang justru malah menjadi hambatan bagi perusahaan menikmati manfaat kemajuan teknologi pada mesin otomotif. Kurangnya sumberdaya terlatih dan familiarisasi teknologi juga memperlambat perkembangan perusahaan yang semestinya ikut merasakan keuntungan sesungguhnya dari peningkatan teknologi ini.
Meningkatkan efisiensi bahan bakar dan mengurangi emisi gas buang yang menjadi keterbatasan mesin mekanis kini telah terjawab dengan adanya kontrol yang presisi dengan memanfaatkan kecepatan eksekusi mikroprosesor yang memberikan perintah pada perangkat elektronik yang kemudian diterjemahkan kedalam gerakan mekanis. kemudahan dalam mengidentifikasi dan menganalisa masalah pun menjadi sebuah fitur unggulan yang ditawarkan teknologi kontrol elektronis.

 

SASARAN TRAINING

•    Peserta mampu memahami Sistematika mesin elektronis
•    Peserta mampu memaksimalkan utilisasi perangkat diagnosis
•    Peserta mampu melakukan troubleshooting sederhana, diagnosa pada mesin elektronis
•    Peserta mampu memahami strategi perawatan terbaik pada mesin elektronis

 

GARIS BESAR PROGRAM

•    Fuel Efficiency dan Emission performance
•    Computer aided/ diagnostic tools softwares
•    Simple Troubleshooting steps
•    Fleet management
•    Technical Data management
•    Strategic plan for electronic equipments
•    Review & evaluation

 

Lead Trainer

Azis M Nawawi
AM Nawawi adalah seorang Senior Technical Trainer di sebuah perusahaan yang merupakan salah satu group dari group perusahaan alat berat terbesar di Indonesia. Beliau adalah master di bidang electronic engine dan diagnostic software. Pengalamannya selama 14 tahun didunia alat berat dan pertambangan membawanya pada posisi terakhir sebagai People Development Supervisor hingga kini memilih untuk bekerja sebagai professional consultant and trainer, Dia ahli dalam proyek pengembangan skills dan competency bagi heavy equipment technician dan technical training delivery, set up yearly training program, developing and maintain performance management untuk memastikan performance karyawan serta mengembangkan equipment maintenance strategic plan.

 

FEE :

• Rp. 2.250.000, -  (Registration 3 person/more; payment before October 6th, 2010)


• Rp. 2.450.000, -  (Reg before September 29th, 2010; payment before October 6th, 2010)


• Rp. 2.950.000, -  (Full Fare)

 

PETROLEUM FINANCE, COST CONTROL & RESERVOIR MANAJEMEN

PETROLEUM FINANCE, COST CONTROL & RESERVOIR MANAJEMEN
(Petroleum Economics)

Hotel Grand Seriti Boutique Bandung | 1 – 4 Desember 2010 | Rp  6.750.000/person

 

OBJECTIVES

• Memberikan pengetahuan dasar ilmu keekonomian beserta perhitungannya


• Peserta mengetahui dan memahami dasar-dasar manajemen perusahaan minyak dan gas bumi.


• Peserta mengetahui dan memahami Simulasi Monte Carlo dan aplikasinya dalam proyek migas


• Mengetahui peranan Plan Of Development (POD) bagi perusahaan migas


• Peserta mengetahui dan memahami sistem kontrak yang ada di perusahaan masing-masing.


• Peserta bisa melakukan perhitungan sendiri dan merencanakan manajemen reservoir di masa yang aka datang secara lebih baik.

 

CAKUPAN MATERI TRAINING

1. Mempelajari Dasar-dasar Ekonomi Teknik


2. Metoda-Metoda Untuk Mengukur Indikator Keuntungan


3. Penentuan Pilihan dan Alternatif


4. Basic Reservoir Engineering


5. Analisa Statistik Proyek Migas


6. Pajak  dan Penerimaan Pemerintah Bukan Pajak


7. Sistem Kontrak Perusahaan Minyak dan Gas Bumi


8. Simulasi Monte Carlo


9. Simulasi Monte Carlo Untuk  Penilaian Prospek Migas


10. Pengantar Plan Of Development (POD)


11. Manajemen Resiko dan Analisis Sensitivitas


12. Analisis Resiko dan  Pengambilan Keputusan Proyek Migas

WHO SHOULD ATTEND

• Drilling Division
  
  
  
  • Drilling Manajer, Drilling Supervisor dan Drilling Engineer
  
  
  
  


• Reservoir Division
  
  
  
  • Reservoir Manajer, Reservoir Engineer
  
  
  
  


• Production Division
  
  
  
  • Production Manajer, Production Supervisor, Production Operator
  
  
  
  


• Maintenance Division


• Accounting Division

 

INSTRUKTUR

Ir. Sudiharto, MT & Team

Ir. Sudiharto, MT,  is alumnus from Bandung Institute of Technology (ITB) department of petroleum engineering. Ir. Sudiharto besides as instructor and researcher at Geothermal Laboratory ITB, he is also being as Production Engineer at LAPI ITB, Production & Reservoir Analist and  expert board (Dewan Pakar) at Forum Komunikasi Daerah Penghasil Migas, and joining in Community Development Team Dirjen Migas since 2003.

Some projects have been handled by him such as policy analysis expert on oil and gas subsector, oil and gas production expert, and field economicity such as: projection study investation potency energy and mineral resources, implementation study national energy consumtion, study on field use of Brownfield in Indonesia, inventarization research of old well potential in regency of Muaro Jambi,  blueprint arrangement manpower on oil and gas subsector, development operation cost estimation system oil and gas: geological and geophysical stage, study of combustion flare gas at PERTAMINA DOH Jawa Bagian Barat, survey and development of GIS based datas for planning and distribution BBM  and transportation gas through pipe, study on planning of Indonesia – Asean pipeline system, etc. Ir. Sudiharto have trained for training class for many companies in Indonesia. Some topics that have been frequently delivered by him as follows :

1. Electric Submercible Pump, Problem and Trouble Shooting Mecanism


2. Crude Oil Analysis


3. Drilling, Production and Workover Strategy


4. Well Workover and Completion Stretegy


5. Petroleum Finance, Acconting and Reservoir Management


6. Plan of Development in Oil and Gas Industries


7. Pressure Control for Drilling Engineer


8. Plan of Development (POD) & Authorization For Expenditures (AFE)


9. Management Skills Secretary Petroleum Gas and Oil Industries


10. Pressure Transient Analysis and Well Testing Data Interpretation


11. Oil Production System and Operation


12. Formation Damaged and Well Stimulation


13. Simulasi Reservoir for Petroleum Engineer


14. Oil and gas transportation/measurement, etc

 

TEMPAT TRAINING

Hotel Grand Seriti Boutique Bandung

 

DURASI TRAINING

4 days

 

WAKTU TRAINING

1 – 4 Desember 2010

 

HARGA INVESTASI/PESERTA

1. Rp 6.750.000/person (full fare)  or


2. Rp 6.500.000/person (early bird, payment before 24 November 2010) or


3. Rp 6.250.000/person (if there are 3 persons or more from the same company)

 

FASILITAS UNTUK PESERTA

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

 

PETROLEUM ENGINEERING FOR NON PETROLEUM EMPLOYEE

PETROLEUM ENGINEERING FOR NON PETROLEUM EMPLOYEE

Hotel Golden Flower Bandung | 27 – 31 Desember 2010 | Rp 7.450.000/peserta

SASARAN TRAINING :

1. Memberikan gambaran mengenai kegiatan industri di sektor hulu minyak dan gas bumi dari kegiatan eksplorasi sampai ke eksploitasi, yang meliputi :
   
   
   
   • Pengenalan kegiatan Geologi dan Geofisika
   
   
   • Pengenalan kegiatan pemboran
   
   
   • Pengenalan kegiatan pengujian sumur
   
   
   • Interpretasi Logging
   
   
   • Karakteristik Reservoir minyak dan gas bumi
   
   
   • Kegiatan produksi minyak dan gas bumi
   
   
   • Pengenalan Enhanced Oil Recovery (EOR)
   
   
   
   


2. Memberikan pengetahuan yang komprehensif tentang dasar-dasar keteknikan dan keekonomian minyak dan gas bumi.


3. Mempelajari jenis-jenis pekerjaan di dalam industri perminyakan.


4. Mengetahui klasifikasi, jenis dan cara perhitungan cadangan minyak dan gas bumi


5. Mengetahui secara menyeluruh mengenai tatacara dan persyaratan untuk membangun perusahaan minyak, mengenai pengenalan POD (Plan Of Development) Minyak dan Gas Bumi


6. Mengetahui regulasi industri sektor hulu minyak dan gas bumi

 

CAKUPAN MATERI TRAINING :

1. Pengantar Industri Minyak: Aktivitas mulai dari seismik eksplorasi, eksploitasi-produksi, transportasi, proses dan profesi lainnya misalnya sipil, elektro, mesin, keuangan, administrasi, material handling, marketing dll.


2. Petroleum Geologi dan Reservoir: Terjadinya minyak dan sumbernya, migrasi minyak dibatuan, formasi berpori dan permeable, teori minyak Gussow, porositas dan permeabilitas, core sample. Peta struktur  Isopach, Mencari Original Oil In Place. Menaksir cadangan reservoir. Sifat Fluida, Viskositas, Densitas, Formation Volume Factor. Jenis Reservoir Drive. Menaksir Recovery Factor.


3. Pemboran: Peralatan yang digunakan, Rig, Pompa, sirkulasi Lumpur, Bit dan alat-alat lainnya.


4. Sumur Minyak/Gas: Casing, Completion, Perforasi, Tubing, Wellhead, Christmas Tree, Perforasi dll.


5. Artificial Lift: Peralatan untuk produksi minyak bila tekanan telah rendah, misalnya sucker rod pump, jet pump, electric submersible pump, gas lift, keuntungan dan kerugian tiap sistim.


6. Well Testing: Beberapa test laju minyak, gas, BS&W dan test temperature dan tekanan.


7. Well Treatment: Hydraulic Fracturing, Acidizing dan Other Chemical Treatment.


8. Proses Minyak di Lapangan: Manifold, well test, Separator, Dehidrator, Pipeline, pompa, storage dll.


9. Sistim Penimbunan/Storage-Konstruksi tanki, menanggulangi air produksi.


10. Pengukuran Minyak dan Gas: Tank-Strapping, API deg., Keamanan, LACT.


11. Transportasi Minyak: Pipeline, Tanker dll.


12. Kilang Minyak: Produk minyakdan jenisnya, bagaimana proses di kilang, cracking Proses, Petrokimia.


13. Meningkatkan Perolehan hidrokarbon: Waterflood, Steamflood, CO2 Injection, Huff & puff.


14. UU Minyak dan KPS. Uraian singkat mengenai jenis-jenis kontrak.


15. Diskusi

 

PARTICIPANTS

1. Minimal lulusan SMA atau STM


2. Setiap orang dari masing-masing Dept. non PE seperti Dept. Finance, Logistic, Drilling, Pemasaran dan para sekretaris di perusahaan minyak tersebut yang akan bisa  menyebabkan kerjasama lebih baik dan lebih mudah.

 

 

TRAINING INSTRUCTOR

Ir. Sudiharto, MT.  and Team
Ir. Sudiharto, MT,  is alumnus from Bandung Institute of Technology (ITB) department of petroleum engineering. Ir. Sudiharto besides as instructor and researcher at Geothermal Laboratory ITB, he is also being as Production Engineer at LAPI ITB, Production & Reservoir Analist and  expert board (Dewan Pakar) at Forum Komunikasi Daerah Penghasil Migas, and joining in Community Development Team Dirjen Migas since 2003.
Some projects have been handled by him such as policy analysis expert on oil and gas subsector, oil and gas production expert, and field economicity such as: projection study investation potency energy and mineral resources, implementation study national energy consumtion, study on field use of Brownfield in Indonesia, inventarization research of old well potential in regency of Muaro Jambi,  blueprint arrangement manpower on oil and gas subsector, development operation cost estimation system oil and gas: geological and geophysical stage, study of combustion flare gas at PERTAMINA DOH Jawa Bagian Barat, survey and development of GIS based datas for planning and distribution BBM  and transportation gas through pipe, study on planning of Indonesia – Asean pipeline system, etc. Ir. Sudiharto have trained for training class for many companies in Indonesia. Some topics that have been frequently delivered by him as follows :
1.    Electric Submercible Pump, Problem and Trouble Shooting Mecanism
2.    Crude Oil Analysis
3.    Drilling, Production and Workover Strategy
4.    Well Workover and Completion Stretegy
5.    Petroleum Finance, Acconting and Reservoir Management
6.    Plan of Development in Oil and Gas Industries
7.    Pressure Control for Drilling Engineer
8.    Plan of Development (POD) & Authorization For Expenditures (AFE)
9.    Management Skills Secretary Petroleum Gas and Oil Industries
10.    Pressure Transient Analysis and Well Testing Data Interpretation
11.    Oil Production System and Operation
12.    Formation Damaged and Well Stimulation
13.    Simulasi Reservoir for Petroleum Engineer
14.    Oil and gas transportation/measurement, etc

 

TEMPAT TRAINING :

Hotel Golden Flower Bandung

DURASI TRAINING :

5 days

WAKTU TRAINING :

27 – 31 Desember 2010

 

HARGA INVESTASI/PESERTA :
1.    Rp 7.450.000/peserta (bayar penuh)  atau
2.    Rp 7.250.000/peserta (early bird, yang membayar sebelum 20 December 2010)  atau
3.    Rp 6.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

 

FASILITAS UNTUK PESERTA :

1. Modul Training


2. CD Training berisi materi training


3. Sertifikat


4. ATK: NoteBook dan Ballpoint


5. Jaket atau rompi atau T-Shirt


6. Tas atau ransel


7. Foto Training


8. Ruang Training dengan fasilitas Full AC dan multimedia


9. Makan siang dan 2 kali coffeebreak


10. Instruktur yang Qualified


11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

WELDING INSPECTION & QUALITY CONTROL - Yogyakarta

WELDING INSPECTION & QUALITY CONTROL

Wisma MM UGM, Yogyakarta | 12 – 15 Oktober 2010 | 08.00 – 16.00 WIB | Rp. 4.500.000,-

 

Deskripsi

Kebutuhan akan ketersediaan tenaga kerja yang mempunyai skill di bidang welding  tentulah sangat signifikan jumlahnya. Sering dijumpai aktifitas welding yang tentunya mempunyai standart dan spesifikasi teknis yang sangat ketat yang mengacu pada standart internasional. Untuk itulah dibutuhkan tenaga pengawas (welding inspector) untuk menjamin mutu/quality yang dipersyaratkan oleh standart internasional  yang dipersyaratkan. Para personel yang akan melakukan pengawasan quality pun harus mempunyai kualifikasi yang tentunya yang diakui oleh standart intenasional.  materi yang disiapkan pada training ini difokuskan sebagai standart practice bagi para personel yang akan berkecimpung di bidang welding inspeksi sebagai knowlage untuk aplikasi dilapangan dan juga sebagai persiapan untuk mengikuti training welding inspector dengan kualifikasi nasional maupun internasional.

Peserta

Operator, staf dan yang bekerja pada bidang pengelasan

Materi

1. Inspeksi Las


2. Pengenalan Standart


3. Gambar teknik


4. Teknik Uji Tanpa Rusak (Nondestructive Testing )


5. Pengujian Sifat Mekanis


6. Kualifikasi Prosedur Las


7. Desain Las


8. Ilmu Bahan Logam dan Metalurgy Las


9. Teknologi Las


10. Teknik Reporting (documentasi)

Instruktur

Ir. Agus Jayatun

Tempat

Wisma MM UGM Yogyakarta

Waktu

12 – 15 Oktober 2010,
08.00 – 16.00 WIB

Biaya

Rp. 4.500.000,- per orang non residential

NATURAL GAS PROCESSING - FRACTINATION AND REFREGERATION

NATURAL GAS PROCESSING - FRACTINATION AND REFREGERATION

Hotel Golden Flower Bandung |13 – 17 December 2010 | Rp  7.450.000/person

 

INTRODUCTION, GOAL AND OBJECTIVE

The training material subjects are covered: physical properties, phase equilibria and  vapour liquid equilibrium calculations, water-hydrocarbon systems, natural gas gathering and plant inlet separation, acid gas treating/sweetening, dew  point control and natural gas liquids recovery. The training is designed primarily for engineers and technologists involved in the design, operation, and optimization of gas processing facilities. This training is designed to familiarize technical professionals with the design and operation of propane refrigeration loops used in typical NGL recovery and/or dewpoint control facilities, with an emphasis on design, troubleshooting and performance optimization. A working knowledge of gas compression is required. The principles of natural gas liquids fractionation and cryogenic expander operation are also discussed, including LNG and LPG operations and power recovery from LNG import terminals.

 

TRAINING MATERIAL OUTLINE

Day 1

Physical Properties

1. Phase Equilibria and Vapour Liquid Equilibrium Calculations


2. Natural Gas Gathering and Plant Inlet Separation


3. Problem Solving Session:
   
   
   1. Oil Characterization
   
   
   2. Gas Gathering
   
   


4. Dew Point Control and Natural Gas Liquids Recovery


5. Gas Plant Process Dynamics and Control of Critical Loops


6. Problem Solving Session:
   
   
   1. Refrigerated Gas Plant
   
   
   2. Natural Gas Liquids Fractination
   
   
   3. Gas Plant Dynamics
   
   

Day 2

1. Water-Hydrocarbon Systems and Natural Gas Dehydration


2. Acid Gas Treating and Sweetening


3. Problem Solving Session:
   
   
   1. Natural Gas Dehydration with Glycols
   
   
   2. Acid Gas Sweetening with Amines
   
   

Day 3-4-5

Fractination and processing

1. Principles of Distillation


2. Vapour-Liquid Equilibrium


3. Mechanics


4. Characteristics of Good Distillation


5. Column Design Principles, Including Control Strategies


6. Case : Methanol Bunyu Process and


7. Troubleshooting

 

PARTICIPANTS

• New Engineering graduates and Technologists who need to develop an  understanding of Natural Gas Processing Principles and Technology.


• Professionals who have been working in industry but are new to Natural Gas Processing.


• Professionals who are familiar with Natural Gas Processing but are  unfamiliar with how process simulators can be used to improve plant  design and optimize plant profitability.

 

INSTRUCTOR

Ir. Sudiharto, MT,  is alumnus from Bandung Institute of Technology (ITB) department of petroleum engineering. Ir. Sudiharto besides as instructor and researcher at Geothermal Laboratory ITB, he is also being as Production Engineer at LAPI ITB, Production & Reservoir Analist and  expert board (Dewan Pakar) at Forum Komunikasi Daerah Penghasil Migas, and joining in Community Development Team Dirjen Migas since 2003.

Some projects have been handled by him such as policy analysis expert on oil and gas subsector, oil and gas production expert, and field economicity such as: projection study investation potency energy and mineral resources, implementation study national energy consumtion, study on field use of Brownfield in Indonesia, inventarization research of old well potential in regency of Muaro Jambi,  blueprint arrangement manpower on oil and gas subsector, development operation cost estimation system oil and gas: geological and geophysical stage, study of combustion flare gas at PERTAMINA DOH Jawa Bagian Barat, survey and development of GIS based datas for planning and distribution BBM  and transportation gas through pipe, study on planning of Indonesia – Asean pipeline system, etc. Ir. Sudiharto have trained for training class for many companies in Indonesia. Some topics that have been frequently delivered by him as follows :

1. Electric Submercible Pump, Problem and Trouble Shooting Mecanism


2. Crude Oil Analysis


3. Drilling, Production and Workover Strategy


4. Well Workover and Completion Stretegy


5. Petroleum Finance, Acconting and Reservoir Management


6. Plan of Development in Oil and Gas Industries


7. Pressure Control for Drilling Engineer


8. Plan of Development (POD) & Authorization For Expenditures (AFE)


9. Management Skills Secretary Petroleum Gas and Oil Industries


10. Pressure Transient Analysis and Well Testing Data Interpretation


11. Oil Production System and Operation


12. Formation Damaged and Well Stimulation


13. Simulasi Reservoir for Petroleum Engineer


14. Oil and gas transportation/measurement, etc

 

VENUE

Hotel Golden Flower Bandung

 

TRAINING DURATION

5 days

 

TRAINING TIME

13 – 17 December 2010

 

INVESTATION PRICE/ PERSON

1. Rp 7.450.000/person (full fare)  or


2. Rp 7.250.000/person (early bird, payment before 6 December 2010) or


3. Rp 6.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

 

HUMAN MACHINE INTERFACE (HMI) : PROCESS SYSTEM VISUALIZATION AND CONNECTION TO PLC

HUMAN MACHINE INTERFACE (HMI) : PROCESS SYSTEM VISUALIZATION AND CONNECTION TO PLC

Hotel Grand Seriti Boutique Bandung | 8 – 10 December 2010 | Rp 5.450.000/person

INTRODUCTION :

HMI sebagai sarana utama dalam system monitoring automation dan SCADA system sehingga pemahanan tentang pengembangan(developing) dan menjalankan(running and operation) dari HMI itu sendiri menjadi penting untuk diketahui oleh operator, supervisor dan pihak-pihak yang berhubungan dengan system automasi di industry. Training ini didesain dengan harapan peserta training aktif di kelas dengan proporsi praktik yang banyak dengan membuat dan mempelajari studi kasus tertentu.

OBJEKTIF :

1.    Peserta memahami prinsip-prinsip dasar HMI
2.    Peserta mampu membuat(developing) software aplikasi HMI
3.    Peserta mampu melakukan konektifitas antara software aplikasi HMI dengan controller device(PLC)
4.    Peserta bisa mengoperasikan system HMI yang telah dibuat
5.    Peserta memahami system konektifitas antara HMI system dan data server system

TRAINING MATERIAL OUTLINE/CAKUPAN MATERI TRAINING:

1.     Opening + Pretest
2.      Introduction to Human Machine Interface(HMI)
3.      Introduction to HMI Software Feature
4.      HMI Window Maker(Developing Mode)
5.      HMI Window Maker (Developing Mode)
6.      I/O Server and OPC Connection
7.      System integration & Communicaton: PLC – OPC – HMI
8.      HMI Tagname System
9.      HMI Animation Connection
10.    HMI Scripting System
11.    HMI Realtime & Historical Trending
12.    HMI Alarm & Event System
13.    HMI Security System
14.    HMI Operation
15.    Discussion
16.    Pos Test + Closing

TRAINING INSTRUCTOR

Ir. Mairodi, MT. and Team
Ir.Mairodi, MT., lulusan dari Physics Engineering(Bachelor) Institut Teknologi Bandung dan Program Instrumentasi dan Kontrol(Master) Institut Teknologi Bandung. Telah berpengalaman memberikan pelatihan di bidang instrumentasi kontrol seperti PLC, DCS, HMI, SCADA dan Industrial Process Control. Pernah memberikan pelatihan untuk perusahaan Migas dan pertambangan serta manufaktur seperti PT.Bayer Urethanes Indonesia, PT Pupuk Kaltim, PT. Geodipa unit Dieng, PT. Krakatau Steel, PT. Medco LPG, PT. Arun LNG, PT. Star Energy, PT. Medco Energy Tanjung Jati, PT. Kaltim Pasifik Amoniak(KPA), PT.ConocoPhillips Indonesia, PT. Babcock & Wilcock, PT.Petrokimia Gresik, Langsa FPSO PTE LTD, PT.Alstom Transport, PT.Unilever Indonesia, PT. Siemen, PT. Pupuk Iskandar Muda, BP Indonesia, PT. TJB Power Services, PT. Indonesia Power UPB Suralaya, CNOOC, TOTAL, PGN, PT. IPMOMI, PT. Rekayasa Engineering, PT. HM Sampoerna, Siemens Indonesia, Chevron Indonesia, PT. Medco, PT. PLN, PT. Elsicom Engineering, PT. Freeport McMoran Indonesia, Plaza Senayan, PT. KPC, INCO, VICO, PT. Ivomas Salim Pratama, dll.

VENUE :

Hotel Grand Seriti Boutique Bandung

TRAINING DURATION :

3 days

TRAINING TIME  :

8 – 10 December 2010

INVESTATION PRICE/PERSON :
1.    Rp 5.450.000/person (full fare)  or
2.    Rp 5.250.000/person (early bird, payment before 1 December 2010) or
3.    Rp 4.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD contains training material


3. For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by Provider team / instructor


4. Certificate


5. Stationeries: NoteBook and Ballpoint


6. Jacket or waistcoat or T-Shirt


7. Bag or backpackers


8. Training Photo


9. Training room with full AC facilities and multimedia


10. Once lunch and twice coffeebreak every day of training


11. Qualified  instructor


12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

RECOMMENDATION FOR PARTICIPANTS:
For practice session: each participant is recommended to bring notebook/laptop for softwares installation and practice session

 

REKAYASA HIDROLIK AND APLIKASI

REKAYASA HIDROLIK AND APLIKASI

Hotel Golden Flower Bandung | 13 – 16 Desember 2010 | Rp 6.450.000/person

 

TUJUAN TRAINING

Memberikan suatu wawasan   industri yang berkenaan dengan rekayasa hidrolik berupa prinsip-prinsip hidrolik, rancangan peralatan dan berbagai rangkain serta aplikasinya

 

CAKUPAN MATERI TRAINING

1. Prinsip-prinsip fisika, simbol dan standar ISO


2. Rancangan, fungsi dan data karakteristik dari pompa, katup aliran, katup tekanan, katup arah (directional control valve)


3. Kurva karakterstik pompa


4. Pengukuran waktu dan tekanan silinder


5. Metode perhitungan untuk gaya, kecepatan dan keluaran (debit)


6. Rangkaian dasar mempergunakan silinder kerja tunggal dan kerja ganda


7. Simulasi parameter rancangan dalam rekayasa hidrolik


8. Praktek laboratorium


9. Diskusi

 

INSTRUCTOR

Ir. Aris Suryadi, MT. and Team

Ir. Aris Suryadi, MT adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti  Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

 

VENUE

Hotel Golden Flower Bandung

 

TRAINING DURATION

4 days

 

TRAINING TIME

13 – 16 Desember 2010

 

INVESTATION PRICE/ PERSON

1. Rp 6.450.000/person (full fare)  or


2. Rp 6.250.000/person (early bird, payment before 6 December 2010) or


3. Rp 5.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS

1. Training Module


2. Training CD contains training material


3. For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by Provider team / instructor


4. Certificate


5. Stationeries: NoteBook and Ballpoint


6. Jacket or waistcoat or T-Shirt


7. Bag or backpackers


8. Training Photo


9. Training room with full AC facilities and multimedia


10. Once lunch and twice coffeebreak every day of training


11. Qualified  instructor


12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

 

ADVANCE COURSE ON LIGHTNING PROTECTION AND GROUNDING SYSTEM

ADVANCE COURSE ON LIGHTNING PROTECTION AND GROUNDING SYSTEM

Hotel Golden Flower Bandung | 13 – 17 December 2010 | Rp 7.950.000/person

 

TRAINING MATERIAL OUTLINE :

1. Lightning Phenomena


2. External Lightning Protection System


3. Grounding and Bonding System


4. Internal Lightning Protection System


5. Lightning Detection System-LPATS


6. Lightning Protection & Grounding System for Telecommunication Installation


7. Lightning Protection & Grounding System for Power Plan, Transmission & Distribution System


8. Lightning Protection & Grounding System for oil, gas Refinary and Petrochemical Installation


9. Design  External Lightning Protection System


10. Design  Internal Lightning Protection System


11. Design and Measurement Grounding and Bonding System


12. Thermo Welding for Grounding System


13. Lightning Arrester Test


14. ITB Lightning Research Center Trip - Mt. Tangkubanperahu

 

INSTRUKTUR TRAINING

Dr. Dipl.Ing. Ir. Reynaldo Zoro
Dr. Dipl.Ing. Ir. Reynaldo Zoro  graduated from Institute of Techonology, Bandung taking for High Voltage & Electrical. He has experience in Electrical Area since 1978.  He is a Head of Laboratory of High Voltage, ITB and he is Chairman of Power Engineering Division of STEI-ITB.  He has given many short courses for in-house or public course of lightning protection, electrical grounding to industries in the country. He is member of CIGRE - France, member of Standardization for DLPE- ESDM, IEC TC-81 and DLPE - ESDM.

 

VENUE :

Hotel Golden Flower Bandung

TRAINING DURATION :

5 days

TRAINING TIME :

13 – 17 December 2010

 

INVESTATION PRICE/PERSON :
1.    Rp 7.950.000/person (full fare)  or
2.    Rp 7.700.000/person (early bird, payment before 6 December 2010) or
3.    Rp 7.500.000/person (3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

 

Implementation of Electronic Filing and Document Management System

Implementation of Electronic Filing and Document Management System

Aryaduta Hotel Semanggi / Santika Hotel Jakarta | 22-23 September 2010 |08.30 - 16.30 | Rp 2.950.000,-/person

 

BACKGROUND

Era globalisasi dengan perkembangan teknologi informasi dewasa ini sangat membutuhkan karyawan yang menguasai konsep filing document management system, baik dengan metode manual ataupun dengan electronic process. Di dalam konsep tersebut sudah terdiri dari ; bagaimana mengelola hard document (paper document) dan soft document ( image document dan manual document).

Pengelolaan image document ( dokumen hasil scanning ) dan manual document (dokumen hasil dari suatu aplikasi, seperti dokumen word processor, spread sheet dan presentation) sangat penting diterapkan dalam mendukung kebijakan management document berdasarkan standar ISO 9001:2001/2008. Apabila konsep filing document management system sudah digunakan dengan baik dan benar dalam suatu organisasi, maka akan sangat membantu memaksimalkan proses pelayanan, baik kepada internal customer ataupun kepada exte(rnal customer, sehingga membuat image yang baik dan meningkatkan daya saing bagi organisasi tersebut.

 

PURPOSE
Setelah mengikuti pelatihan ini peserta diharapkan mampu untuk :

1. Memahami konsep manual filing system dan peralatan pendukukungnya.


2. Memahami konsep electronic filing system dan peralatan pendukukungnya.


3. Memahami faktor-faktor kunci strategis yang menunjang kesuksesan dalam penerapan electronic filling management system.


4. Memahami prinsip-prinsip dan gambaran procedure dari penerapan electronic filling management system.


5. Melakukan proses instalasi software Electronic filing di dalam computernya masing-masing.


6. Melakukan proses instalasi scanner yang digunakan melalui software Electronic filing.


7. Melakukan proses untuk aplikasi Records Management System, Electronic Document Management System dan Electronic Imaging System pada software Electronic filing.


8. Melakukan proses kontrol dokumen berdasarkan konsep ISO 9001:2000, proses distribusi dokumen dan proses updating dokumen pada software Electronic filing.


9. Melakukan proses pengiriman soft document e-mail langsung melalui software Electronic filing.


10. Melakukan proses penyelesaian studi kasus berdasarkan departement masing-masing.

 

TRAINING METHOD
Pelatihan ini menggunakan metode interaktif, dimana peserta dikenalkan kepada konsep, diberikan contoh aplikasinya, berlatih menggunakan konsep, mendiskusikan proses dan hasil latihan.

1. 25% Theory


2. 75% Practices (Step by step from using application electronics document management system software)


3. Dynamic and interactive training presentation

 

TRAINING SYLLABUS

1. Understanding of manual filing system concept and supporting tools.


2. Understanding of electronic filing system concept and supporting tools.


3. Understanding strategic key factors for success of electronic filing system implementation


4. Understanding principles and procedure illustration of electronic filing system implementation.


5. How using of Electronic filing operation steps for software Installation process.


6. How using scanner Installation process which electronic filing  application.


7. How using of Electronic filing operation steps for Records Management System implementation.


8. How using of Electronic filing operation steps for Electronics Imaging System implementation.


9. How using of Electronic filing operation steps for Electronics Document Management System implementation.


10. How using of Electronic filing operation steps for link of Records Management System and Electronics Imaging System.


11. How using of Electronic filing operation steps for Security Management Information System implementation.


12. How using of Electronic filing operation steps for Document Control process.


13. How using of Electronic filing operation steps for Document Distribution process.


14. How using of Electronic filing operation steps for Document Update process.


15. How using of Electronic filing operation steps for Document Sending which e-mail automation process.


16. Case Study from trainer and participants training.

 

WHO SHOULD ATTEND
Staff, Leader, Supervisor, hingga Manager yang bertanggung jawab dalam proses filing document

 

LEAD FACILITATOR
ERAWAN SUPRIATNA, S. KOM & TIM
Praktisi & trainer yang mempunyai pengalaman lebih dari 15 tahun menjadi instructor / trainer di beberapa lembaga pelatihan swasta, instansi pemerintah / swasta di Jakarta, mulai tahun 1992 - 2003, antara lain di PT. Asiana IMI Industries, Tbk., PT. COMBIPHAR, di PT. LG Philips Display Devices Indonesia, PT. LG Electronics Indonesia, PT. LG Innotek Indonesia dan PT. Harita Prima Abadi Mineral (Mining Company). Pernah menjabat sebagai Manager EDP dan Manager Training & Development di perusahaan swasta dan perusahaan jasa konsultan. Jabatan terakhir beliau adalah sebagai Direktur di PT. Target Digital Solusindo. Beliau juga pernah memberikan pelatihan sebagai berikut : Mastering Microsoft Excel 2007 : Beyong Basic For Office Automation, Powerfull Data Analysis & Dashboard Reporting with Ms. Excel 2007, COBOL Programming, RPG Programming, FORTRAN Programming, RDBMS With SQL 2000, System Analyst and Design, VB6 Database programming, VF9 Database Programming, IT Security, ITIL, COBIT, dan lain-lain. Selain itu juga beliau adalah praktisi pelatihan dengan metode quantum teaching, quantum learning, mind mapping dan NLP di bagian pengembangan sumber daya manusia (HRD Training & Development) selama lebih dari 7 tahun. Dengan perpaduan metode pelatihan seperti itulah, pelatihan seberat apapun selalu dibawakan secara ringan, jelas dan tuntas. Sehingga proses pelatihan berlangsung dengan menyenangkan dan mencapai tujuan yang diinginkan oleh peserta pelatihan.

Date

22-23 September 2010,              08.30 – 16.30

Venue

Aryaduta Hotel Semanggi / Santika Hotel Jakarta

Investment

• Rp 2.950.000,-/person


• Early Bird : Rp 2.650.000,- (Paid 5 days Before 22 September 2010)


• Group Price : Rp 7.500.000,- (3 participants from the same company)

VSAT Management System Training

VSAT Management System Training

Grand Seriti Hotel , Bandung   | 27 – 29 September 2010 | Rp. 5.250.000,-

OBJECTIVE

• Desain, membuat, mengkonfigurasi dan memanaje sistem VSAT


• Peserta dapat menghitung link budget sistem VSAT


• Melakukan site survey menggunakan GPS dan menginstalasi


• Peserta dapat mengoptimasi dan melakukan troubleshooting

WHO SHOULD ATTEND

Peserta adalah yang bertanggung jawab atau terlibat dalam desain, konfigurasi atau troubleshooting sistem VSAT, seperti technical support, engineer, dan administrator jaringan VSAT.

PREREQUISITES

Memahami tentang telekomunikasi.

COURSE OUTLINE

A. Dasar Komunikasi Satelit

• Pendahuluan Satelit dan cara kerja


• Transmisi satelit


• Kelebihan dan kekurangan satelit


• Bandwidth dan satuan


• Polarisasi, LNA/LNB/LNC dan Modulasi


• Digital Video Broadcasting


• Unjuk kerja dan kualitas link

B. Telknologi VSAT

• Persiapan Instalasi VSAT


• Site Survey


• Interface Data


• Link Budget Sistem VSAT


• Pengukuran kualitas sinyal


• Grounding dan anti petir


• Preventive maintenance


• Troubleshooting

 

Instructor
Dr. Ir. Ian Josef Matheus Edward, MT adalah praktisi IT semenjak tahun 1993, seorang dosen Teknik Elektro ITB yang menamatkan gelar Doktornya di Manajemen Telekomunikasi Teknik Elektro Universitas Indonesia. Beliau juga seorang Project Manager riset bersama pengembangan system radio non line of sight untuk daerah rural RDC Telkom, Project Manager Konsultasi radio Trunking untuk Oil Company, Team Wind Energy, Telemetry and Telecommunication Systems - International Project, Dubai dan India juga Team Telecommunication System Project Laos. Beliau adalah penanggung jawab pelatihan IT Untuk Pertamina, Bank Indonesia, BRI dan Exelcomindo.

 

Schedule
27 – 29 September 2010
3 days

Venue
Grand Seriti Hotel, Bandung

Tuition Fee
Rp. 5.250.000,- per participant, excluding accommodation & tax.

 

Piping System & Pipeline Integrity with an Application to ASME B31 Codes & API579 (PASTI JALAN)

Piping System & Pipeline Integrity with an Application to ASME B31 Codes & API579

Novotel Hotel, Bandung | Sep 27 - Oct 1, 2010 | Rp.8.250.000,-per participant

 

OBJECTIVES

• The Participant will gain an in-depth knowledge of pipe and fitting material specifications, fabrication process and influence on mechanical properties of strength and toughness, to help in material selection and failure analysis.


• The participant will understand the technical background to the design equations, and their application to the design of piping systems and pipelines. The course addresses rules of good practice in layout of piping systems for reliable operation.


• The participant will gain a practical understanding of piping and pipeline corrosion mechanisms, how to recognize them, classify them and resolve them.


• The participant will be introduced to the latest techniques and research in piping and pipeline integrity to analyze a degraded condition due to either corrosion or mechanical damage.


• The participants will review case histories of field failures and will evaluate their cause and solutions to avoid recurrence.

WHO SHOULD ATTEND

The course is intended for engineers, maintenance technicians and inspectors responsible for the design, integrity, maintenance and repair of pipelines and piping systems.

COURSE OUTLINE

Day 1: Introduction, Material and Inspections

Welding

1. Introduction

• History of Pipeline Technology


• ASME Codes and Standards


• API Standards


• NACA, MSS-SP, PFI Standards


• Fundamentals of Maintenance and Integrity

2. Materials

• API 5Land ASTM Specifications


• Practical Aspects of Metallurgical Properties


• Chemistry and Material Test Reports


• Fabrication of Line Pipe and Forged Fittings


• Mechanical Properties: Strength and Toughness

3. Welding

• Overview of Pipe and Pipeline Welding Practice


• API 1104 and ASME IX Requirement


• Welding In-service: Challenge and Solutions

Day 2: Integrity for Sustained Loads

1. Operating and Design Pressure

• How to Establish the System Design Pressure


• Introduction to Pressure Relief Valves


• Pipe and Pipeline Sizing Formula with Applications

2. Layout and Support

• Rules of Good Practice in layout


• Pump and Compressor Piping


• How to Support a piping System


• Review of Support Types and their Application


• Lesson learned from Poor Support Practices

3. Temperature Effects

• Flexibility Layout Analysis


• Temperature Transients and Fatigue Damage

4. Vibration In Service

• Mechanical and Hydraulic Induced Vibration in Piping


• How to Measure Analyze Resolve Vibration

Day 3: Integrity for Occasional Loads

1. Pressure Transients

• Recognizing and Solving Liquid Hammer


• Pump Station Transients


• Study of Pipeline Failures Due to Transient


• Two-Phase Liquid -Vapor Transients


• Two-Phase Liquid-Gas Transients


• Gas Discharge Transients

2. Buried Pipe

• Soil Loads


• Surface Loads


• Expansion of Buried Pipe


• Soil settlement


• n-service Movement of Pipeline

3. Pipeline Failures

• Study Case Histories


• Understanding Why Failures Occur and How to Avoid Them

Day 4: Piping System Maintenance

1. Flange and Mechanical Joints

• Overview of Different Types of Flanges and Application


• Gasket of Bolt Selection


• Causes of Flange Leaks and How to Resolve


• Case Study of Flange Failure


• Assembly of Flange Joints and Leak Tightness

2. Pressure and Leak Testing

• The Difference Between Leak Testing and Pressure Testing


• Review of Difference Testing Techniques


• The Purpose of Hydro test


• How to Conduct a Hydro test


• Pipeline and Piping Systems Testing


• Pneumatic Testing

3. Repair Techniques

• The New ASME Repair Standards


• The Fundamentals of Repair package


• Pipe and Component Replacement


• Grinding and welding


• Welded Sleeve: Type A and B


• Flush Patch Repair


• Fillet Welded Patch


• Weld Overlay Repair


• Mechanical Clamp with Sealant Injection


• Mechanical Clamp without Sealant Injection


• Insertion Liners


• Painted and Brushed Liners


• Pipe Coating

Day 5: Corrosion, Assessment and Repairs

1. Corrosion

• Introduction to Practical Corrosion


• Classification of Corrosion Mechanisms


• General wall Thinning


• Local Corrosion: Galvanic Effects


• Crevice corrosion


• Pitting Corrosion


• Environmental Effects


• Hydrogen and H2s Effects


• Microbiological Corrosion


• Corrosion Protection


• Cathodic protection Overview

2. Mechanical damage To Pipelines

• Dents and Gouges


• Ripples and buckles

3. Fitness For Service Overview

• Application of ASME B31G to Determine Remaining Life


• Application of 579 to General and Local Corrosion


• Analysis of Dents and Gouges in Pipelines


• How to Evaluate cracks in piping and Pipelines

 

Instructor

DR. Ir. IGN. Wiratmaja Puja has 16 years continuous mechnanical engineering experience in failure and stress analysis, mining machinery and design as well as mechanical drawing and has been a consulting engineering expert in machinery and equipment maintenance for PT. Tambang Batubara Tanjung Enim, KONDUR Petroleum and PT. Kereta Api Indonesia. He also has served as an in-company training instructor for several major oil and gas companies such as PT. Badak LNG, PT. Freeport Indonesia, VICO and PT. Timah Tbk.

Mr. Wiratmaja has authored numerous publications and presentations related to mechanical engineering and mining machinery. He holds a M.Sc. and Ph.D. degree in Mechanical Engineering from the University of Kentucky, USA.

Schedule
Sep 27 - Oct 1, 2010
5 days

Venue
Novotel Hotel, Bandung

Tuition Fee
Rp.8.250.000,-per participant, excluding accommodation & tax.

VIBRATION ANALYSIS & PREDICTIVE MAINTENANCE - Yogyakarta

VIBRATION ANALYSIS & PREDICTIVE MAINTENANCE

Wisma MM UGM, Yogyakarta | 16 - 19 Nov 2010 | 08.00 – 16.00 WIB | Rp. 4.000.000,- per orang

DESKRIPSI

Vibration analysis is an important tool in improving equipment maintainability and reliability. The economics of accurately diagnosing and minimizing vibration are indisputable. Millions can be saved by reducing lost production, materials and, wasted manpower.

This course is designed to lay the foundation for a successful vibration analysis and condition monitoring program, especially for predictive maintenance.

PESERTA

Instrumentation & Control Engineers, Maintenance Engineers, Mechanical Engineers & Technicians, Control Technicians, Electrical Engineers, Electricians, Maintenance Engineers & Technicians, Process Engineers, Consulting Engineers, Automation Engineers.

 

METODE

Presentation, Discussion, Case Study, Evaluation

MATERI

• Introduction


• Vibration Monitoring And Analysis – Turbomachinery


• Data Acquisition Systems And Techniques


• Basics Of Signal Analysis


• Vibration Analysis For Different Machinery Faults


• Machinery Specific Vibration Analysis


• Vibration Basics


• Resonance – Identification And Rectification


• Applications Of Vibration


• Analysis – Balancing


• Other Predictive Techniques

INSTRUKTUR

Ir. Y. Agus Jayatun, MT

( Pakar dan Praktisi di bidang Maintenance khususnya Predictive Maintenance)

 

WAKTU & TEMPAT

16 - 19 Nov 2010
08.00 – 16.00 WIB
Wisma MM UGM Yogyakarta

INVESTASI

Biaya kursus (Non Residential) :

Rp. 4.000.000,- per orang

 

FASILITAS

Certificate, Training Kit, Module / Handout, Lunch, Coffee Break, Souvenir

ELECTRIC MOTOR: OPERATION, MAINTENANCE & TROUBLESHOOTING - YOGYAKARTA

ELECTRIC MOTOR: OPERATION, MAINTENANCE & TROUBLESHOOTING

Wisma MM UGM,  Yogyakarta | 26 – 28 Oktober 2010 | 08.00 – 16.00 WIB | Rp. 4.000.000,-

DESKRIPSI

Training Electrical Motor is a way to stay competitive as industry must constantly reduce planning, manufacturing installation and maintenance costs. This Electrical Motor course introduces the participant to the basics of motor and motor control design, application, installation and maintenance, protection and control and describes the control operations and uses of each control products, it’s voltage, current and frequency ratings.

MATERI

1. General Motor Design and Operation
   
   
   
   • Basic Motor Teory
   
   
   • AC Motors
   
   
   • Power System Effects on Motors
   
   
   • Application of Motor Loads
   
   
   • High Efficiency Motors
   
   
   • Power Factor Correction
   
   
   
   


2. Motor Control Techniques
   
   
   
   • Symbology and Terminology
   
   
   • Starting Methods
   
   
   • Stopping Methods
   
   
   • Speed Control
   
   
   
   


3. Motor Protection


4. Motor Failure Analysis
   
   
   
   • Electrical Failures
   
   
   • Mechanical Failures
   
   
   • Load Related Failures
   
   
   
   


5. Motor Testing Methods


6. Motor Maintenance Practice
   
   
   
   • Electrical Maintenance
   
   
   • Mechanical Maintenance
   
   
   
   

PESERTA

Engineer, Electrical Engineer, Maintenance Operator,etc

INSTRUKTUR

Tugino, S.T, M.T.

Beliau Praktisi bidang kelistrikan.Mendapatkan gelar Magister Teknik dari  UGM Yogyakarta . Pengalaman beliau sebagai instruktur antara lain: Electrical Tool Inspection, PT. IPMOMI  Paiton, Presure Relief Valve, PT Chevron Riau, Process Safety,  PT Chevron Kalimantan, Electrical Safety, PT Chevron Garut  JaBar, Basic Electricity, PT Chevron Sumatra, Instrument Process Control, PT Chevron Riau, Electric Motor  Control, Operator dan Karyawan PTP  VII-IX , LPP Yogyakarta  Electric  Motor Control, PT PetroChina Sorong, Management Energy, PT  Semen Gresik, Process Control Instrumentation, PT Pertamina Cilacap Programmable Logic Controller, PT Chevron Sumatra

WAKTU & TEMPAT

• 26 – 28 Oktober 2010, 08.00 – 16.00 WIB


• Wisma MM UGM Yogyakarta

INVESTASI

Biaya kursus (Non Residential) :

Rp. 4.000.000,- per orang

FASILITAS

Certificate, Training Kit, Module / Handout, Lunch, Coffee Break, Souvenir

CONTRACT MANAGEMENT, STRATEGY AND ADMINISTRATION FOR OIL & GAS - Yogyakarta

CONTRACT MANAGEMENT, STRATEGY AND ADMINISTRATION FOR OIL & GAS

Wisma MM UGM,  Yogyakarta | 18-20 Oktober 2010 | 08.00 – 16.00 WIB | Rp. 4.000.000,-

 

DESKRIPSI

Hukum Kontrak Manajemen di bidang Minyak & Gas adalah suatu aspek kritis yang dapat menyebabkan terobosan besar dalam anggaran organisasi karena proses litigasi mahal dan proses penyelesaian sengketa. Sebuah pengamatan yang baik dan analisis secara keseluruhan draf kontrak untuk menghapus ambiguitas dan klausa berisiko dapat membuat perbedaan penting untuk keberhasilan atau kegagalan bottom line organisasi.

Pelatihan ini akan menjelaskan semua aspek pembentukan kontrak, pelaksanaan dan penyelesaian sengketa. Peserta akan belajar mitigasi risiko, strategi manajemen, dan karakteristik dari berbagai jenis kontrak sehingga akan memberikan peserta pemahaman lengkap tentang hukum kontrak yang memungkinkan mereka untuk menjadi negosiator handal.

 

PESERTA

• Eksekutif / Manajer berurusan dengan semua jenis kontrak Minyak dan Gas,


• Legal officers & advisers untuk perusahaan Minyak dan Gas


• Manajer Keuangan


• Manajer Pengadaan, Pejabat, Eksekutif


• Direktur Operasi, Manajer Eksekutif


• Engineers involved in: Planning, Development & Facilities Management

 

METODE

Presentation, Discussion, Case Study, Evaluation, Pre test dan Pos Test

 

MATERI

1. Introduction


2. Esensi dan elemen kunci dari Kontrak Oil & Gas


3. Proses pembentukan kontrak Oil & Gas


4. Klausul Kontrak dan Isu Terkait tentang Oil & Gas


5. Memahami dokumen kontrak Oil & Gas


6. Manajemen Risiko melalui perangkat hukum


7. Ganti rugi dan klausa Release


8. Hukum kontrak dan negosiasi


9. Hukum yang berlaku


10. Menghindari dan mengelola sengketa


11. Cara-cara Penyelesaian Sengketa


12. Penegakan proses

 

INSTRUKTUR

Nurjihad, S.H, M.H.

WAKTU &TEMPAT

18-20 Oktober 2010 | 08.00 – 16.00 WIB
Wisma MM UGM Yogyakarta

 

INVESTASI

Biaya kursus: Rp. 4.000.000,- per orang (Non Residential),

 

FASILITAS

Certificate, Training Kit, Module / Handout, Lunch, Coffee Break, Souvenir

DISTRIBUTED CONTROL SYSTEM - Yogyakarta

DISTRIBUTED CONTROL SYSTEM

Wisma MM UGM,  Yogyakarta | 2 – 5 November 2010 | 08.00 – 16.00 WIB | Rp. 4.000.000,-

DESKRIPSI

This course will cover the practical applications of distributed control systems. Included is the relationship between programmable logic controllers and the DCS. Further included is the importance of Human Computer Interfaces (HMI) and advanced control strategies, which would not be possible without the application of a computer. This course is non-specific but will include a number of manufacturers DCS systems, such as Honeywell TDC rage. Each delegate will receive a comprehensive course manual. The concept of field buses is introduced with some study of Foundation of assets management as a tool for proactive maintenance systems.

 

PESERTA

This course is intended for engineers and technicians requiring knowledge of automation and distributed control

 

METODE

Presentation, Discussion, Case Study, Evaluation

 

MATERI

1. Computer Interfacing


2. Basic DCS Controller Configuration


3. Uninterrupted Automatic Control


4. Advanced DCS Systems


5. Advanced Control Strategies


6. Box Level Control


7. Sequence Programs Linked to Control from Data Highway Box Level


8. Practical Examples of Level 2/3 Control


9. Maintenance Considerations


10. Maintenance Requirements of System and System Elements


11. Procedure for Checking Control Loop Calibration


12. IN-built Diagnostics and Maintenance Diagnostic Routines


13. Requirements for Installation of UPS System

 

INSTRUKTUR

Ir. Teguh Santoso

Prakstisi di bidang pembangkitan dan telah berpengalaman dalam berbagai kegiatan training, inspeksi dan konsultan di berbagai lembaga dan perusahaan seperti PT. Angkasa Pura II, PLTA Mrica, PLTA Jelog, PLTA Garung, PT. Perhutani, PLTA Kedung Bandara Sokerno-Hatta, PTPN XI, PTPN X, PT Fokus Indo Lighting Jakarta, PT. Mirambi Energi (bersama PT. Jasa-Produksi, PLN) PLTD Mateko Bulukumba, Sulawesi Selatan.

Beliau juga aktif mengajar di berbagai perguruan tinggi antara lain di STMIK AKAKOM, IST AKPRIND, AAN, AAU untuk mata kuliah: Teknik Digital, Sistem Mikroprosesor dan mengajar di Jurusan Teknik Elekro Fakultas Teknik, Universitas Gadjah Mada

 

WAKTU & TEMPAT

2 – 5 November 2010
08.00 – 16.00 WIB
Wisma MM UGM Yogyakarta

 

INVESTASI

Biaya kursus (Non Residential) :

Rp. 4.000.000,- per orang

 

FASILITAS

Certificate, Training Kit, Module / Handout, Lunch, Coffee Break, Souvenir

WATER FLOODING

WATER FLOODING

Hotel Golden Flower Bandung | 1 – 5 November 2010 | Rp 7.450.000/person

xx

INTRODUCTION :

Water flooding is a method of secondary recovery in which water is injected into the reservoir formation to displace residual oil. The water from injection wells physically sweeps the displaced oil to adjacent production wells. Potential problems associated with waterflood techniques include inefficient recovery due to variable permeability, or similar conditions affecting fluid transport within the reservoir, and early water breakthrough that may cause production and surface processing problems. This training is addressed to them who want to know and to deepen their understanding and practical aspects of water flooding.

 

CAKUPAN MATERI TRAINING :

1.    SEJARAH WATER FLOODING

1.1    Pendahuluan

1.2    Sejarah Perkembangan Water Flooding

2.    EFISIENSI MIKROSKOPIS DARI PENDESAKAN TAK TERCAMPUR

2.1    Pendahuluan

2.2    Prinsip Dasar Interaksi Fluida dan Batuan

2.3     Metoda Estimasi Distribusi Fluida dalam Media Berpori

2.4    Prinsip Aliran Multi Fasa dalam Media Berpori

2.5    Saturasi Minyak Residu

2.6    Mobilisasi Minyak Residu

3.    EFISIENSI PENDESAKAN MAKROSKOPIS PADA LINEAR ATERFLOOD

3.1    Pendahuluan

3.2    Pengembangan Persamaan Aliran Multifasa dalam Media Berpori

3.3    Solusi Sready State untuk Persamaan Aliran Fluida dalam Sistem Linear

3.4    Persamaan Frontal Advance untuk Pendesakan Unsteady State 1 Dimensi

3.5    Estimasi Performa Pendesakan untuk Linear Waterflood pada Laju Injeksi Konstan

3.6    Linear Waterflood pada Pressure Drop Konstan

3.7    Equivalensi dari Konstan Rate dan Konstan Pressure Solution Persamaan Frontal Advance

3.8    Linear Waterflood dengan Saturation Air Initial Bergerak (Mobile)

3.9    Linear Waterflood dengan Initial Water Saturation Bergerak (Mobile)

3.10  Penentuan Kurva Permeabilitas Relatif dari Analisis Data Pendesakan Linear

3.11  Faktor yang Mengontrol Efisiensi Pendesakan dalam Linear Waterflood

3.12  Keterbatasan Frontal Advance Solution

3.13  Solusi Persamaan Pendesakan Linear dengan Model Numerik

4.    PENDESAKAN TAK TERCAMPUR DUA DIMENSI

4.1    Pendahuluan

4.2    Pola Pendesakan Lima Titik

4.3    Korelasi dari Model Laboratorium

4.4    Korelasi Craig-Geffen-Morse (CMG)

4.5    Perbandingan Model CMG dan Streamtube untuk Pola Five Spot

5.    PENDESAKAN DALAM SISTEM LINEAR DAN AREAL MODEL

5.1    Pendahuluan

5.2    Pendesakan Dua Dimensi dalam Reservoir Homogen Multi Layer Model Dmensi

5.3    Gravity Segregation dan Cross Flow dalam Reservoir Linear

5.4    Aproksimasi Aliran 2D dengan sifat/Properties Ketebalan rata-rata

5.5    Estimasi Effisiensi Pendesakan Vertikal dengan Model Skala Laboratorium

5.6    Sistem Numerik Pendesakan 2D dalam Sistem Linear Termasuk Geavity Segregation dan/atau Cross Flow

5.7    Viscouse Fingering

5.8    Estimasi Performa Waterflood dengan Model 3D dan SimulatorReservoir

6.    DESAIN WATERFLOOD

6.1    Pendahuluan

6.2    Faktor Penyusun Desain

6.3    Deskripsi Reservoir

6.4    Pemilihan Potensial Flooding Plans

6.5    Laju Injeksi

6.6    Estimasi Performa Waterflood

 

TRAINING INSTRUCTOR

Ir. Sudiharto, MT,  is alumnus from Bandung Institute of Technology (ITB) department of petroleum engineering. Ir. Sudiharto besides as instructor and researcher at Geothermal Laboratory ITB, he is also being as Production Engineer at LAPI ITB, Production & Reservoir Analist and  expert board (Dewan Pakar) at Forum Komunikasi Daerah Penghasil Migas, and joining in Community Development Team Dirjen Migas since 2003.

Some projects have been handled by him such as policy analysis expert on oil and gas subsector, oil and gas production expert, and field economicity such as: projection study investation potency energy and mineral resources, implementation study national energy consumtion, study on field use of Brownfield in Indonesia, inventarization research of old well potential in regency of Muaro Jambi,  blueprint arrangement manpower on oil and gas subsector, development operation cost estimation system oil and gas: geological and geophysical stage, study of combustion flare gas at PERTAMINA DOH Jawa Bagian Barat, survey and development of GIS based datas for planning and distribution BBM  and transportation gas through pipe, study on planning of Indonesia – Asean pipeline system, etc. Ir. Sudiharto have trained for training class for many companies in Indonesia. Some topics that have been frequently delivered by him as follows :

1. Electric Submercible Pump, Problem and Trouble Shooting Mecanism




2. Crude Oil Analysis




3. Drilling, Production and Workover Strategy




4. Well Workover and Completion Stretegy




5. Petroleum Finance, Acconting and Reservoir Management




6. Plan of Development in Oil and Gas Industries




7. Pressure Control for Drilling Engineer




8. Plan of Development (POD) & Authorization For Expenditures (AFE)




9. Management Skills Secretary Petroleum Gas and Oil Industries




10. Pressure Transient Analysis and Well Testing Data Interpretation




11. Oil Production System and Operation




12. Formation Damaged and Well Stimulation




13. Simulasi Reservoir for Petroleum Engineer




14. Oil and gas transportation/measurement, etc

 

TEMPAT TRAINING :

Hotel Golden Flower Bandung

 

DURASI TRAINING :

5 days

 

WAKTU TRAINING :

1 – 5 November 2010

 

HARGA INVESTASI/PESERTA :

1. Rp 7.450.000/person (full fare)  or


2. Rp 7.250.000/person (early bird, payment before 25 October 2010) or


3. Rp 6.950.000/person (if there are 3 persons or more from the same company)

 

FASILITAS UNTUK PESERTA :

1. Training Module


2. Training CD Contains Training Material


3. Certificate


4. Stationeries: NoteBook and Ballpoint


5. Jacket or Waistcoat or T-Shirt


6. Bag or Backpackers


7. Training Photo


8. Training Room with Full AC Facilities and multimedia


9. Once lunch and twice coffeebreak every day of training


10. Qualified  instructor


11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)