Work Program & Budget, Authorization for Expenditure and Plan of Development (WP&B, AFE and POD)

Work Program &Budget, Authorization for Expenditure and Plan of Development (WP&B, AFE and POD)

Jayakarta Suite Hotel & Spa, BANDUNG| April 11-13, 2011 | US$  890,-/participant

INTRODUCTION

Production Sharing Contracts needs approvals for Work Program &Budget, Authorization for Expenditure and Plan of Development from BP Migas. The approvals are based on the economic and optimal management of the programs. Therefore, the understanding of petroleum business, economic evaluation and management optimization.

To understand Petroleum Economic Evaluation needs knowledge of petroleum proven reserve and production, price, costs, government takes, contractor profit, minimum return and Production Sharing Contract.

 

YOU WILL LEARN

• Dynamics of Petroleum Business


• Methods to Measure Profit Indicators


• Government Take from Tax and non Tax


• Production Sharing Contract


• Work Program and Budget


• Authorization for Expenditure


• Plan of Development

 

WHO SHOULD ATTEND?

• Financial Analyst


• Project Engineering and Economic Team


• Development Planning Team


• Geophysicist and Geologist


• Reservoir Engineers, Production Engineers and Drilling Engineers


• Anybody who wish to learn the course subjects

 

WHO IS THE INSTRUCTOR

In this comprehensive course, you will be assisted by a compatible Instructor:

Widjajono Partowidagdo is a Professor in Petroleum Economics and Field Management at the Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung (ITB), a member of National Energy Council, a member of Supervision Team for Increasing Petroleum Production at Ministry of  Energy and Mineral Resources and advisor for Association of Petroleum National Companies and Indonesian Petroleum Engineers Association.

He was the Head of the Research Group in Drilling and Production Engineering and Management of Oil and Gas at the Faculty of Earth Sciences and Mineral Technology, ITB from 2005-2007, Head of Graduate Program in Development Studies ITB from 1993-2004, Vice Dean for Academic Affairs, Faculty of Mining Technology and Senate Member of ITB from 1994-1997 and Coordinator for Research in Sustainable Development at the Inter-University Center for Economics, University of Indonesia from 1989-1992.

He received his Bachelor in Petroleum Engineering from ITB, MSc in Petroleum Engineering, MSc in Operations Research, MA in Economics and PhD with a dissertation on "An Oil and Gas Supply and Economics Model for Indonesia" from the University of Southern California, Los Angeles, USA.

He has written three books (in Indonesian):  Management and Economy of Oil and Gas, 2002; Understanding Development and Policy Analysis, 2004; and Petroleum and Energy in Indonesia, Problems and Policy Analysis, 2009. He was a coordinating author of Agenda 21, Energy for Sustainable Development, Coordinating Ministry of Environment and UNDP, 2000.

 

general information

schedule, tuition & facilities:

Language                      : Bahasa Indonesia

Text & Handouts          : English & Bahasa Indonesia




Date :
January 10-12, 2011




Duration : 3 days

Facilities :

Three-day registration fee for all Training sessions; Quality Training Material (Hardcopy and Softcopy); Quality Training Kits; Convenient Training Facilities at Four Star Hotel; Refreshment and luncheons, Certificate of Completion, Dinner with entertainment at the cozy restaurant

 

DOCUMENTATION

Integrated Quality Training Material· (HARDCOPY AND SOFTCOPY) & Quality Training Kits will be delivered on registration, additional papers & handouts assignment by Our Partner.

Note-taking by participants is encouraged. However, to ensure free and open· discussions, no formal records will be kept.

 

CERTIFICATE OF APPRECIATION

All attendees will receive a Certificate of Appreciation attesting to their participation in the Training.  This certificate will be providing in exchange for a completed Training Questionnaire.

 

TRAINING VENUE

Golden Flower Hotel, BANDUNG

 

DRESS CODE:

Casual Clothing is recommended. The Training atmosphere is informal

 

Registration Fee: (Exclude accommodation)

Registration until March  04, 2011

• o US$ 890,-/participant from 1 (one) Company

 

REGISTRATION POLICY:

• Registration Form MUST be return in advance for attending the Training


• Full fixed fee is charged regardless of the length of time that registrant· attends the Training


• Attendees are Training sessions and are not permitted to attend·expected to  all attend basis. on a partial

 

CANCELLATION & REFUND POLICY

• Cancellation received after the registration deadline, October 06, 2009 entitles the registrant to received 25% refund.


• Cancellation on the date will be recharged 100% from the· fee


• No refund will be issued, if a registrant fails to show up at the Training on-site.

 

Managing Control Object For IT (COBIT)

Managing Control Object For IT (COBIT) Version 4.1

Aryaduta Hotel Semanggi / Santika Hotel Jakarta| 10-11  May 2011 | 08.30 – 16.30 | Rp 2.950.000,-
Aryaduta Hotel Semanggi / Santika Hotel Jakarta|0 1-02  July 2011 | 08.30 – 16.30 | Rp 2.950.000,-

 

BACKGROUND

Semakin berkembang business process suatu organisasi maka akan sangat membutuhkan support dari department IT, baik dalam policy (planning, implementation, control and evaluation), resources, infrastructure dan system application development. Apabila hal-hal tersebut tidak mendapatkan guide yang benar, maka departemen IT akan mendapatkan kesulitan dalam melakukan proses control dan evaluasi dari implementasi IT yang sedang dijalankan, sehingga peningkatan IT services management yang diinginkan dan dibutuhkan oleh organisasi berdasarkan infrastructure dan resources yang ada tidak sesuai dengan harapan.

Dalam konsep COBIT best practice, departement IT diberikan arahan yang sistematis, lengkap dengan object – object yang digunakan sebagai acuan dalam melakukan planning, implementation, control and evaluation, sehingga dapat memberikan respon proaktif dan reaktif terhadap proses bisnis yang sedang terjadi serta peningkatan IT service management yang diinginkan dari organisasi tersebut.

PURPOSE

Setelah mengikuti pelatihan ini peserta diharapkan mampu untuk :

1. Mengetahui & memahami konsep COBIT & prinsip-prinsip yang ada di dalamnya


2. Mengetahui & memahami hubungan proses antar komponen COBIT


3. Memahami IT resources dengan pengelolaan fungsi-fungsi di dalamnya


4. Memahami COBIT domains dan hubungan proses antar domains.


5. Memahami 7 criteria yang ada pada COBIT untuk membantu tercapainya tujuan organisasi.


6. Memahami alur pengembangan kebijakan organisasi IT dan siklus controlnya.


7. Memahami pembuatan summary proses, criteria dan resources.

 

TRAINING METHOD

Pelatihan ini menggunakan metode interaktif, dimana peserta dikenalkan kepada konsep, diberikan contoh aplikasinya, berlatih menggunakan konsep, mendiskusikan proses dan hasil latihan.

1. 60% Theory


2. 40% Practices (Case study of Finance, HRD, Marketing, Production, Purchasing problems)


3. Dynamic and interactive training presentation.

TRAINING SYLLABUS

1. Overview of COBIT.


2. Basic COBIT Principle


3. COBIT Content Diagram


4. Interrelationship of COBIT Component


5. IT Resources in COBIT


6. Managing IT Resources to Deliver IT Goals


7. The COBIT Domains


8. The Four Interrelated Domains of COBIT


9. COBIT Framework


10. Seven Criteria of COBIT


11. Policy Development Flow and Control Cycle


12. The COBIT Cube


13. Summary Processes, Criteria and Resources.

 

WHO SHOULD ATTEND

IT Supervisor or IT Manager

 

FACILITATOR

ERAWAN SUPRIATNA, S. KOM

Praktisi & trainer yang mempunyai pengalaman lebih dari 15 tahun menjadi instructor / trainer di beberapa lembaga pelatihan swasta, instansi pemerintah / swasta di Jakarta, mulai tahun 1992 - 2003, antara lain di PT. Asiana IMI Industries, Tbk., PT. COMBIPHAR, di PT. LG Philips Display Devices Indonesia, PT. LG Electronics Indonesia, PT. LG Innotek Indonesia dan PT. Harita Prima Abadi Mineral (Mining Company). Pernah menjabat sebagai Manager EDP dan Manager Training & Development di perusahaan swasta dan perusahaan jasa konsultan. Jabatan terakhir beliau adalah sebagai Direktur di PT. Target Digital Solusindo. Beliau juga pernah memberikan pelatihan sebagai berikut : Mastering Microsoft Excel 2007 : Beyong Basic For Office Automation, Powerfull Data Analysis & Dashboard Reporting with Ms. Excel 2007, COBOL Programming, RPG Programming, FORTRAN Programming, RDBMS With SQL 2000, System Analyst and Design, VB6 Database programming, VF9 Database Programming, IT Security, ITIL, COBIT, dan lain-lain. Selain itu juga beliau adalah praktisi pelatihan dengan metode quantum teaching, quantum learning, mind mapping dan NLP di bagian pengembangan sumber daya manusia (HRD Training & Development) selama lebih dari 7 tahun. Dengan perpaduan metode pelatihan seperti itulah, pelatihan seberat apapun selalu dibawakan secara ringan, jelas dan tuntas. Sehingga proses pelatihan berlangsung dengan menyenangkan dan mencapai tujuan yang diinginkan oleh peserta pelatihan.

Date

• 10-11 May 2011            08.30 – 16.30


• 01-02 July  2011            08.30 – 16.30

 

Venue

Aryaduta Hotel Semanggi / Santika Hotel Jakarta

Investment :

May:

• Rp 2.950.000,- /Person


• Early Bird : Rp 2.800.000,- (Paid 4 days Before 10  May, 2011)


• Group Price : Rp 8.100.000,- (3 participants from the same company)

July:

• Rp 2.950.000,- /Person


• Early Bird : Rp 2.800.000,- (Paid 4 days Before  01 July , 2011)


• Group Price : Rp 8.100.000,- (3 participants from the same company)

Estimasi Ketidakpastian Pengukuran pada Laboratorium

Estimasi Ketidakpastian Pengukuran pada Laboratorium

Bandung |  19 - 20 Mei 2011 | IDR 3.750.000,-
Bandung | 06 -07  Oktober 2011 | IDR 3.750.000,-

PENDAHULUAN

Di Era perdagangan bebas ini, para pelaku bisnis dituntut untuk bertindak sangat hati-hati dalam menjaga mutu produknya karena ketatnya persaingan diantara para pesaingnya. Salah satu faktor yang sangat penting dalam rantai produksi untuk menjaga mutu tersebut

adalah kebenaran pengukuran tiap komponen yang membentuk produk tersebut. Kebenaran pengukuran ini dinyatakan oleh laboratorium penguji/kalibrasi yang berkompeten. Menyadari hal tersebut Kami berusaha untuk berbagi pengalaman dengan membantu industri, organisasi, instansi, laboratorium, dan pelaku bisnis untuk memahami dan melaksanakan kegiatan menjaga kompetensi laboratorium penguji dengan menerapkan Sistem Manajemen Laboratorium berdasarkan ISO 17025:2008.

Salah satu unsur penting dalam penerapan sistem manajemen ini adalah perhitungan ketidakpastian pengukuran. Mengingat hal itu, maka Kami  menyelenggarakan Pelatihan Estimasi Ketidakpastian Pengukuran pada Laboratorium Penguji/Kalibrasi

 

TUJUAN PELATIHAN

• Memahami prinsip perhitungan ketidakpastian pengukuran untuk laboratorium penguji / kalibrasi




• Mampu melakukan perhitungan ketidakpastian pengukuran untuk laboratorium penguji / kalibrasi

 

GARIS BESAR PROGRAM

• Review Sistem Manajemen Mutu Laboratorium ISO/IEC 17025:2008




• Review Metode Pengujian, Metode Kalibrasi, dan Validasi Metode dalam ISO/IEC 17025:2008




• Pengenalan Estimasi Ketidakpastian Pengukuran




• Penerapan perhitungan Estimasi ketidakpastian pengukuran di Laboratorium Penguji/Kalibrasi

 

METODE PELATIHAN

Partisipatif, diskusi kelompok, latihan individu, latihan kelompok

 

SIAPA YANG HARUS MENGHADIRI?

• Manajer Pelatihan dan Pengembangan




• Manajer Mutu




• Manajer Teknis




• Manajer Laboratorium




• Teknisi penguji dan teknisi kalibrasi




• Penyelia Laboratorium




• Wakil Manajemen (Management Representative)




• Semua yang terkait dalam pengembangan manajemen laboratorium yang memenuhi ISO 17025 :2008 di perusahaan / organisasi / unit usaha / laboratorium

 

LAMA PELATIHAN

14 jam efektif ( 2 hari kerja )

 

TRAINER

Yayan Setiawan, Ir

Instruktur pelatihan ini adalah Yayan Setiawan. Beliau adalah salah seorang tenaga ahli  dengan pengalaman memberikan berbagai pelatihan dan konsultasi dalam bidang Manajemen Laboratorium berdasarkan ISO/IEC 17025 dan Manajemen Mutu (ISO 9000) ke berbagai klien, baik sebagai associate consultant maupun sebagai independent consultant sejak tahun 1998. Pendidikan formal beliau adalah Sarjana Teknik Kimia. Karir profesionalnya dimulai sejak bergabung di PT. Dow Chemical Indonesia (1992 1994), PT. Polytama Propindo (1994 1998), dan PT. PT. Australian Laboratory Services Indonesia (1998 2005). Saat ini beliau banyak memberikan training dan konsultasi untuk membantu berbagai industri, organisasi, instansi, laboratorium, dan pelaku bisnis dalam penerapan Sistem Manajemen Laboratorium berdasarkan ISO/IEC 17025, diantaranya untuk PT. Corelab Indonesia, PT. Australian Laboratory Services Indonesia dan pada project EU TSP Project in Indonesia Ministry of Marine Affair & Fishery. Beliau juga tercatat sebagai Anggota Sub Panitia Teknis Rancangan Standar Nasional Indonesia (RSNI) bidang Lingkungan pada Kementrian Lingkungan Hidup dan juga tercatat sebagai ISO 17025 Certified Assessor dari Komite Akreditasi Nasional.

 

INVESTASI:

• Pendaftaran per peserta                                                                         Rp. 3.500.000,-


• Pendaftaran & Pelunasan 2  minggu  sebelum pelatihan              Rp. 3.250.000,-


• Gratis orang ke 5, untuk pendaftaran 4 orang dari satu perusahaan

 

FASILITAS :

Training Kit, Sertifikat, Makan Siang, Coffee Break, Membership Card

 

Piping System & Pipeline Integrity with an Application to ASME B31 Codes & API579 (PASTI JALAN)

Piping System & Pipeline Integrity with an Application to ASME B31 Codes & API579

Novotel Hotel, Bandung | Sep 27 - Oct 1, 2010 | Rp.8.250.000,-per participant

 

OBJECTIVES

• The Participant will gain an in-depth knowledge of pipe and fitting material specifications, fabrication process and influence on mechanical properties of strength and toughness, to help in material selection and failure analysis.


• The participant will understand the technical background to the design equations, and their application to the design of piping systems and pipelines. The course addresses rules of good practice in layout of piping systems for reliable operation.


• The participant will gain a practical understanding of piping and pipeline corrosion mechanisms, how to recognize them, classify them and resolve them.


• The participant will be introduced to the latest techniques and research in piping and pipeline integrity to analyze a degraded condition due to either corrosion or mechanical damage.


• The participants will review case histories of field failures and will evaluate their cause and solutions to avoid recurrence.

WHO SHOULD ATTEND

The course is intended for engineers, maintenance technicians and inspectors responsible for the design, integrity, maintenance and repair of pipelines and piping systems.

COURSE OUTLINE

Day 1: Introduction, Material and Inspections

Welding

1. Introduction

• History of Pipeline Technology


• ASME Codes and Standards


• API Standards


• NACA, MSS-SP, PFI Standards


• Fundamentals of Maintenance and Integrity

2. Materials

• API 5Land ASTM Specifications


• Practical Aspects of Metallurgical Properties


• Chemistry and Material Test Reports


• Fabrication of Line Pipe and Forged Fittings


• Mechanical Properties: Strength and Toughness

3. Welding

• Overview of Pipe and Pipeline Welding Practice


• API 1104 and ASME IX Requirement


• Welding In-service: Challenge and Solutions

Day 2: Integrity for Sustained Loads

1. Operating and Design Pressure

• How to Establish the System Design Pressure


• Introduction to Pressure Relief Valves


• Pipe and Pipeline Sizing Formula with Applications

2. Layout and Support

• Rules of Good Practice in layout


• Pump and Compressor Piping


• How to Support a piping System


• Review of Support Types and their Application


• Lesson learned from Poor Support Practices

3. Temperature Effects

• Flexibility Layout Analysis


• Temperature Transients and Fatigue Damage

4. Vibration In Service

• Mechanical and Hydraulic Induced Vibration in Piping


• How to Measure Analyze Resolve Vibration

Day 3: Integrity for Occasional Loads

1. Pressure Transients

• Recognizing and Solving Liquid Hammer


• Pump Station Transients


• Study of Pipeline Failures Due to Transient


• Two-Phase Liquid -Vapor Transients


• Two-Phase Liquid-Gas Transients


• Gas Discharge Transients

2. Buried Pipe

• Soil Loads


• Surface Loads


• Expansion of Buried Pipe


• Soil settlement


• n-service Movement of Pipeline

3. Pipeline Failures

• Study Case Histories


• Understanding Why Failures Occur and How to Avoid Them

Day 4: Piping System Maintenance

1. Flange and Mechanical Joints

• Overview of Different Types of Flanges and Application


• Gasket of Bolt Selection


• Causes of Flange Leaks and How to Resolve


• Case Study of Flange Failure


• Assembly of Flange Joints and Leak Tightness

2. Pressure and Leak Testing

• The Difference Between Leak Testing and Pressure Testing


• Review of Difference Testing Techniques


• The Purpose of Hydro test


• How to Conduct a Hydro test


• Pipeline and Piping Systems Testing


• Pneumatic Testing

3. Repair Techniques

• The New ASME Repair Standards


• The Fundamentals of Repair package


• Pipe and Component Replacement


• Grinding and welding


• Welded Sleeve: Type A and B


• Flush Patch Repair


• Fillet Welded Patch


• Weld Overlay Repair


• Mechanical Clamp with Sealant Injection


• Mechanical Clamp without Sealant Injection


• Insertion Liners


• Painted and Brushed Liners


• Pipe Coating

Day 5: Corrosion, Assessment and Repairs

1. Corrosion

• Introduction to Practical Corrosion


• Classification of Corrosion Mechanisms


• General wall Thinning


• Local Corrosion: Galvanic Effects


• Crevice corrosion


• Pitting Corrosion


• Environmental Effects


• Hydrogen and H2s Effects


• Microbiological Corrosion


• Corrosion Protection


• Cathodic protection Overview

2. Mechanical damage To Pipelines

• Dents and Gouges


• Ripples and buckles

3. Fitness For Service Overview

• Application of ASME B31G to Determine Remaining Life


• Application of 579 to General and Local Corrosion


• Analysis of Dents and Gouges in Pipelines


• How to Evaluate cracks in piping and Pipelines

 

Instructor

DR. Ir. IGN. Wiratmaja Puja has 16 years continuous mechnanical engineering experience in failure and stress analysis, mining machinery and design as well as mechanical drawing and has been a consulting engineering expert in machinery and equipment maintenance for PT. Tambang Batubara Tanjung Enim, KONDUR Petroleum and PT. Kereta Api Indonesia. He also has served as an in-company training instructor for several major oil and gas companies such as PT. Badak LNG, PT. Freeport Indonesia, VICO and PT. Timah Tbk.

Mr. Wiratmaja has authored numerous publications and presentations related to mechanical engineering and mining machinery. He holds a M.Sc. and Ph.D. degree in Mechanical Engineering from the University of Kentucky, USA.

Schedule
Sep 27 - Oct 1, 2010
5 days

Venue
Novotel Hotel, Bandung

Tuition Fee
Rp.8.250.000,-per participant, excluding accommodation & tax.

ASME Pressure Vessel: Design, Operation and Maintenance (PASTI JALAN)

ASME Pressure Vessel: Design, Operation and Maintenance

Ibis Slipi Hotel, Jakarta |  3 - 7 Mei 2010 | Rp. 8.250.000,-

COURSE OBJECTIVE

• Be able to calculate, analyze both stress and strength in pressure vessel design


• Gain knowledge of proper material selection for pressure vessel application


• Gain knowledge of welding code standard, which includes inspection, and testing


• Gain better skill to operate, maintain, and repair of pressure vessel


• Perform vessel inspection & maintenance per the applicable Codes and Standards


• Familiar with instrumentation and control system commonly associated with vessel operation

COURSE OUTLINE

Stress and Strength Analysis Calculation Code

• Tube


• Tube-Sheet


• Shell head: Spherical; Hemispherical; Dished; Ellipsoidal; Torispherical; Conical; Toriconical


• Shell joint with head


• Shell joint with bracing and staying


• Ligament on drum and shell


• Openings


• Reinforcement on shell and flat plate


• Bolt on head


• Wind load


• Earth quake load


• Support structure


• Proof Test and Bursting Test

Materials

• Material characteristics


• Heat-treatment effect


• Effect of alloy additive


• ASME Material Code


• Type of material and its selection

Welding

• Type of welding


• ASME Welding Code


• Welding Procedure Specification (WPS)


• Post Weld Heat Treatment (PWHT)


• Quality control


• AWS Classification


• Weld joint efficiency


• Welding defect and repair

NDT (Non Destructive Testing)

• Welding Inspection


• NDT Selection


• Visual Radiography: Limitation; Code of weld joint radiography testing


• Magnetic particle


• Dye Penetrant


• Ultrasonic


• Eddy Current


• Acoustic Emission


• Destructive Testing

Operational Aspects

• Process characteristic consideration


• Start-up procedure


• Observation and shut- down

Instrumentation

• Code of instrumentation for: Pressure gauge; Temperature gauge; Flow meter; Level metering; Density


• Control: Manual, regulating and control valve; Sensor; Transmitter; Actuator and control


• ASME Code for control valve: Valve material; Valve selection; Installation; Setting and test


• Safety and Safety Devices: Alarm indicator, Interlocks; Hard restraints; Restraint of chemical reaction; Pressure relief valve; Pressure safety valve; ASME Code for safety valve; pressure and vacuum relief valve

Effect of Stress and Operating Condition on Pressure Vessel

• Fatigue cracking


• Hydrogen embritlement


• Hydrogen embritlement of welds


• Crack due to welding


• Creep


• Corrosion


• Type of corrosion on pressure vessel


• Pitting


• Crevice


• Inter-granular


• Fatigue corrosion


• Stainless Steel corrosion


• Corrosion inhibitor

Inspection, Repair and Maintenance

• Inspection: Inspection of internal and external physical data; Inspection preparation; Safety in performing internal inspection


• Inspection procedure


• Inspection interval


• NDT


• Hydro test


• Pneumatic test


• Leak test


• Stainless steel overlaid inspection and lined vessel


• Rotating roll inspection


• Low-pressure vessel inspection and heat exchanger


• Maintenance: Preventive maintenance high pressure plant; Predictive maintenance; Maintenance organization; Safety on weldment and cutting; Maintenance management; Maintenance supervision


• Repair: Pitting repair; Crack repair; Heat exchanger repair; Welding repair to stainless steel; Repair involving dissimilar metals; Management support of pressure vessel safety system

WHO SHOULD ATTEND

• Engineer, supervisor, superintendent, and manager of power plant, process plant in refinery, petrochemical, marine, pulp & paper, sugar cane, palm oil


• Maintenance and Operation Engineer, Supervisor, Superintendent


• Design Engineer, Mechanical Engineer, Process Engineer


• Everybody who wants to take benefits from this course

Instructor

DR. Ir. Tri Wibowo, M.Sc graduated from Metallurgy Engineering of Mining Department, Institute of Technology Bandung in 1979. After graduated from ITB he worked as Research Engineer. In 1985 he took master degree in Tribology of Metallurgy and Material Engineering Department, Vanderbilt, Nashville, Tennessee University USA and Five years latter he continued his study by taking PhD degree in Mechanic Metallurgy and Material Engineering Department, KU, Leuven, Belgie.

In his study periods he had a lot of experiences in industrial, for example, in 1980 he was a Research Engineer. In the same time he responsible for Material Identification, In-Situ Metallographic, Remaining Life Assessment and Failure analysis in refinery plants of many cases in oil and gas industries. From 1999 on, he is a leader of laboratory for failure Analysis and Remaining Life Assessment (FARLA)

As a matter of fact, he is a lecturer in Post Graduate on Manufacturing in Mechanical Department of ISTN (National Institute for Science and Technology). Other than teaching, he actives as a free-lance instructor for educations, trainings or courses in the field of material of selection, failure analysis and remaining life assessment, tribology and material testing. Mr. Wibowo is also active as member of Expert Committee in INDOCOR (Indonesian Corrosion Association) and Indonesian Engineer Association member (PII). Lot of his experiences in the field of failure analysis so he published many papers in the field of failure analysis, remaining life assessment, fatigue of metal, corrosion and related topics in journals, seminars or symposium in Indonesia.

Schedule
April 5-9, 2010
5 days

Venue
Ibis Slipi Hotel, Jakarta

Tuition Fee
Rp. 8.250.000,- per participant, excluding accommodation & tax.

PRODUCTION PLANNING & INVENTORY CONTROL (Surabaya)

PRODUCTION PLANNING & INVENTORY CONTROL

Majapahit Hotel / JW Marriot Hotel Surabaya | Rabu, 26-05-2010 - Kamis, 27-05-2010 | Rp 3.150.000,-

 

Industri manufaktur dituntut untuk melakukan perbaikan proses guna mencapai efisiensi, kualitas dan pengiriman tepat waktu. Sistem manajemen perencanaan (Production Planning & Inventory Control) yang baik merupakan kunci sukses industri manufaktur dalam bersaing.

Program pelatihan ini memberikan konsep, prinsip dan praktek penerapan PPIC dengan contoh kasus menarik.

 

Metode Pelatihan :
Pelatihan ini menggunakan metode interaktif, dimana peserta dikenalkan kepada konsep, diberikan contoh aplikasinya, berlatih menggunakan konsep, mendiskusikan proses dan hasil latihan serta pemutaran video.

 

Who should attend ?
Manufacturing Manager, Production Planner, Material Manager, Material Controller, Master Scheduler

 

Materi

1. MASTER PLANNING OF RESOURCE MODEL

2. PLANNING HORIZON

3. FORECASTING DEMAND

• Qualitative method


• Quantitative method


• Forecasting vs product life cycle


• Moving average method


• Tracking forecast


• Menghitung forecast error

4. SALES & OPERATION PLAN, KEY SUCCESS FOR MASTER SCHEDULING

• Why we need sales & operation plan


• Who involve in S&OP


• 5 langkah S&OP bulanan

5. PRODUCTION PLAN & MASTER SCHEDULING PROCESS

6. PRODUCTION STRATEGY : LEVEL & CHASE STRATEGY

7. MASTER PRODUCTION SCHEDULE

8. ROUGH CUT CAPACITY PLAN : MENENTUKAN BOTTLE NECK PROCESS

9. AVAILABLE TO PROMISE

10. TIME FENCE TO ANTICIPATE CHANGE IN DEMAND

11. PRODUCT STRUCTURE (BILL OF MATERIAL)

12. MATERIAL REQUIREMENT PLAN (MRP)

• Tujuan MRP


• Input MRP


• Where used & pegging


• Net requirement, exploding & offsetting

 

TRAINER

IWAN NOVA, MBA, CPIM, CSCP

Pengalaman 20 tahun dalam bidang manufacturing beberapa perusahaan MNC seperti Mitsubishi Electric, Sony, Mattel, Pirelli Cables. Lulus dari ITB Teknik Elektro dan mendapatkan MBA dari Monash University. Mendapatkan sertifikasi CPIM (Certified Production Inventory Management) dan CSCP (Certified Supply Chain Professional) yang dikeluarkan oleh APICS (Association for Operation Management - USA) pada tahun 2005. Pernah mengikuti berbagai short courses di manca negara seperti di Jepang, Amerika, Italy, Malaysia, dan China. Ia telah memberikan berbagai topik training dalam area operation management di berbagai perusahaan baik secara in house ataupun publik.

Ir. IMANADI

Pengalaman 15 tahun dalam bidang manufacturing beberapa perusahaan MNC seperti AT&T, Pirelli Cables & Geomed. Lulus dari ITS Teknik Mesin. Ia telah memberikan beberapa topik training in house di beberapa perusahaan.

Pernah memimpin sebuah departemen dengan jumlah karyawan lebih dari 500 orang di AT&T dan Geomed Indonesia.

Jadual & Lokasi :
Rabu, 26-05-2010 - Kamis, 27-05-2010
Majapahit Hotel / JW Marriot Hotel Surabaya

Fee/Investasi :

• Rp 3.150.000,- (Full Fare)


• Early Bird Rp 3.000.000 untuk pembayaran sebelum tanggal 19 Mei 2010


• Untuk pendaftaran Group sebesar Rp 5.800.000 untuk pendaftaran  2 orang peserta


• BONUS ! ! SOUVENIR  DAN DOOR PRIZE MENARIK

Advance Vibration Analysis

Advance Vibration Analysis

Papandayan Hotel, Bandung  | February 8-12, 2010  | Rp 8.250.000,-

 

OBJECTIVES

• Improve Advance Vibration knowledge


• Detect The Mechanical Component Damage Prematurely


• Understand how to select and use instrumentation to measure vibration correctly

COURSE OUTLINE

1. Aspek Teknologi Perawatan Prediktif Berdasarkan Getaran Permesinan

Getaran & Kondisi mesin: Pengukuran sinyal getaran: Perangkat analysis sinyal getaran; Pengertian dasar Technology Perawatan; Metode Perawatan Konvensional; Metode Perawatan Predikitif, Pemantauan Periodik & Permanen,
Parameter Pengukuran.

2. Karakteristik Getaran Kerusakan Mesin

Ketak seimbanagan: Bantalan Gelinding; Oil Whiri; Misalignment, Mechanical looseness (kekendoran) Roda Gigi; Blade & Vane; Resonansi; Motor Listrik

3. Metode Analisis Sinyal Getaran

Aspek praktis dan analisis; Memanfaatkan fasa untuk analisis; Jumblah dan selisish Frekwensi; Normalisasi kecepatan; Baseline spectrum; Tabel trouble getaran, Standar getaran; evaluasi criteria getaran mesin.

4. Analisis Data Domain Frekwensi

Konsep analisa data domain frekwensi; frekwensi dasar, Harmonik dan fasa; Analisis data auto power, Power spectrum dan cross power; Spectrum; Analisis dan cirri sinyal getaran dalam domain frekwensi.

5. Komputer Program Perawatan Prediktif

Program utama: Konsep Database; Penayangan data; Diagnosis menu tampilan

WHO SHOULD ATTEND

• Rotating Equipment Engineer/ Superintendent/ Supervisor/ Technicians


• Condition Monitoring and Performance Engineer/ Superintendent/ Supervisor


• Mechanical Engineer Superintendent/ Supervisor


• Mill Right


• Engineer/ Superintendent/ Supervisor/ Technician


• Asset Management Team Members


• Maintenance Engineer/ Superintendent/ Supervisor


• Everybody who wants to broaden the knowledge or benefit from this course

 

Instructor
Prof. Dr. Ir. Indra Nurhadi

Prof. DR. Ir. Indra Nurhadi is is a lecturer at Mechanical Engineering Department of ITB since 1975 and head of Computational Mechanics Laboratory since 1988 with nearly 30 years of experience in the industries. He received his bachelor degree in 1973 from Mechanical Engineering of ITB. His master and Ph.D degree were received in 1981 and 1985 from University of Wisconsin - Madison, U.S.A.

He regularly conduct seminars and training for the topics: Finite Element Method for Stress Analysis, Lubrication and Bearings, Selection and Design, Balancing and Alignment, Vibration Analysis for Machine Health Monitoring, Design of Machine Elements, Mechanical Design, Motorcycle Frame Analysis and Design.

 

Schedule
February 8-12, 2010
5 days

Venue
Papandayan Hotel, Bandung

Tuition Fee
Rp  8.250.000,- per participant, excluding accomodation & tax.

 

Internal Audit Laboratory Based on ISO/IEC 17025:2008

Internal Audit Laboratory Based on ISO/IEC 17025:2008

Bandung | 15-16 October 2009 | Rp. 3.000.000,-

 

LATARBELAKANG

Laboratorium dapat dinyatakan sebagai laboratorium yang kompeten apabila laboratorium tersebut telah diakreditasi oleh Komite Akreditasi Nasional (KAN). Untuk dapat diakreditasi, laboratorium tersebut harus menerapkan Sistem Manajemen Laboratorium berdasarkan ISO/IEC 17025:2008 - Persyaratan Umum Kompetensi Laboratorium Penguji/Kalibrasi.

Kami  berusaha untuk berbagi pengalaman dengan membantu industri, organisasi, instansi, laboratorium, dan pelaku bisnis untuk memahami dan melaksanakan kegiatan menjaga kompetensi laboratorium penguji/kalibrasi dengan menerapkan ISO/IEC 17025:2008.

MANFAAT TRAINING AUDIT INTERNAL ISO 17025

1. Memahami prinsip penyiapan laboratorium yang memenuhi persyaratan kompetensi laboratorium penguji / kalibrasi berdasarkan ISO/IEC 17025:2008.


2. Memahami prinsip audit internal laboratorium penguji/ kalibrasi menurut ISO/IEC 17025:2008.


3. Mampu melakukan audit internal bagi laboratorium penguji / kalibrasi menurut ISO/IEC 17025:2008

GARIS BESAR TRAINING AUDIT INTERNAL ISO 17025

• Pengenalan dan Interpretasi ISO/IEC 17025:2008


• Jenis audit


• Program dan prosedur audit


• Perencanaan dan persiapan audit


• Teknik Audit


• Pelaksanaan dan pelaporan audit

SIAPA YG PERLU MENGHADIRI??

Manajer Pelatihan dan Pengembangan, Manajer Mutu, Manajer Teknis, Manajer Laboratorium, Teknisi penguji dan teknisi kalibrasi, Penyelia Laboratorium, Wakil Manajemen (Management Representative), Semua yang terkait dalam pengembangan manajemen laboratorium yang memenuhi ISO 17025 :2008 di perusahaan/organisasi/ unit usaha / laboratorium

TENTANGINSTRUKTUR:

Instruktur pelatihan ini adalah Yayan Setiawan. Beliau adalah salah seorang tenaga ahli  dengan pengalaman memberikan berbagai pelatihan dan konsultasi dalam bidang Manajemen Laboratorium berdasarkan ISO/IEC 17025 dan Manajemen Mutu (ISO 9000) ke berbagai klien, baik sebagai associate consultant maupun sebagai independent consultant sejaktahun 1998. Pendidikan formal beliau adalah Sarjana Teknik Kimia. Karir profesionalnya dimulai sejak bergabung di PT. Dow Chemical Indonesia (1992 1994), PT. Polytama Propindo (1994 1998), dan PT. PT. Australian Laboratory Services Indonesia (1998 2005). Saat ini beliau banyak memberikan training dan konsultasi untuk membantu berbagai industri, organisasi, instansi, laboratorium, dan pelaku bisnis dalam penerapan Sistem Manajemen Laboratorium berdasarkan ISO/IEC 17025, diantaranya untuk PT. Corelab Indonesia, PT. Australian Laboratory Services Indonesia dan pada project EU TSP Project in Indonesia Ministry of Marine Affair & Fishery. Beliau juga tercatat sebagai Anggota Sub Panitia Teknis Rancangan Standar Nasional Indonesia (RSNI) bidang Lingkungan pada Kementrian Lingkungan Hidup dan juga tercatat sebagai ISO 17025 Certified Assessor dari Komite Akreditasi Nasional.

INVESTASI:

• Pendaftaran per peserta                                                                                         Rp. 3.000.000,-


• Pendaftaran & Pelunasan sebelum tanggal 1 Oktober 2009                        Rp. 2.750.000,-


• Pendaftaran 5 orang atau lebih sekaligus dari satu perusahaan               Rp. 2.500.000,-

FASILITAS :

Training Kit, Sertifikat, Makan Siang, Coffee Break,  Membership Card

ELECTRICAL GROUND AND LIGHTNING PROTECTION SYSTEM

ELECTRICAL GROUND AND LIGHTNING PROTECTION SYSTEM

The Jayakarta Suite Hotel & Spa, BANDUNG | October 13-16, 2009   | US$ 770.00/person

 

 

Objective

If you attending this course, you will learn and make a discussion with Instructor and other participants about:

• How to understand the characteristic and the work of protective device


• How to control the protective device


• How to predict and control the disruption


• How to make protection system work well

Objective

• Operator


• Engineer


• Staff/ Technician who take a responsibility in operating, maintaining, and trouble shooting of electrical energy supply from power house generator to power station.

Course Content

• Electrical Power System Distribution Overview
  
  
  
  • Power system configuration
  
  
  • Station arrangement
  
  
  • Prevention and control of system failure
  
  
  • Protection system design considerations
  
  
  
  


• Elements of System Protection
  
  
  
  • Typical relay connections
  
  
  • Circuit breaker control circuits
  
  
  • Instrument transformers
  
  
  • Relay control configurations
  
  
  
  


• Protective Device Characteristics
  
  
  
  • Fuse characteristics
  
  
  • Relay characteristics
  
  
  • Power circuit breakers
  
  
  • Automatic circuit re closers
  
  
  
  


• Electrical Shock Protection


• Types of Fault and Calculation System Characteristics


• Types of Protective Relays


• Protection on Radial System


• Relay Setting


• Bus Protection


• Line Protection


• Relay Coordination


• Protection on Electrical Utilities


• Transformer Protection


• Relay Testing and Maintenance


• Over Voltage Protection on Electrical Power System

Practical Tool:

• Lab Model Protection System


• Earth Tester


• Megger

 

Registration Fee

• Registration Deadline: October 06, 2009


• US$ 770.00/person

 

Fee includes the following:

• Four-day registration fee for all Training sessions;


• Lunch per day


• Daily coffee/tea breaks


• Integrated Quality Training Materials (SOFTCOPY AND HARDCOPY)


• Quality Training Kits,


• Convenient Training Facilities,


• Certifícate of  Compleción

 

Instructor

Ir. Dedy Nono Suharno, MT

He was born in Tasikmalaya. In 1999, he accomplished his Master Degree majoring Instrumentation and control in Institute of Technology Bandung. He has been dedicating his time as a lecturer in Polytechnic Bandung since 1983. As a lecturer, he mastered several lessons, such as electrodynamics, electrical circuit, basic control system, electrical science and electric machine. In the academy, he is not just as a lecturer; he also entrusted to serve as a laboratory head of controlled electric power and machines until now. Furthermore, he had become Chairman of Training for industrial electrical technician of oil palm industry, PT. Sinar Mas. Nowadays, he actively provides training in electric power engineering.

Ir. Dodo Tohir, MT

His fields of expertise are Installation and Distribution of Electricity and Programmable Logic Controller. As a lecturer in Polytechnic Bandung, he teaches PLC, M&R Electrical Equipment, Building Electrical Installation, Industrial Electrical Installation, and Power System Analysis. After finished his bachelor degree majoring electrical engineering, he deepened his knowledge of electrical engineering in Institute of Technology Bandung, 2002. He has several experiences as an Instructor especially for Basic & Advanced PLC. Besides that, he is actively become a member of IATKI (Asosiasi Ketenagalistrikan Indonesia) and IEC (International Engineering Consortium).

Sunarto, ST

From 1986 to 1995, he became a faculty in Polytechnics Education Development Centre. Afterward from 1995 he becomes a faculty in State Polytechnic of Bandung. He accomplished his Bachelor degree in Institute of Technology 10 November (ITS). Sunarto, ST also a member of IATKI (Asosiasi Ketenagalistrikan Indonesia).

Supriyanto, ST

Supriyanto, ST took his bachelor degree in University of Diponegoro, Semarang, 1985, majoring electrical engineering. He is currently finishing his Master Degree in Engineering and Informatics School, ITB, Bandung. To deepen his knowledge, he took some training, such as Teaching Methodology for Electrical Engineering (18 month), Polytechnic Educational Development Centre- Bandung and also Electrical Training Consultant by PT. Freeport Indonesia Company in Joint Operation with Bandung IPB Polytechnic, at Tembagapura Irian Jaya for around 1 year. He is a lecturer in state Polytechnic of Bandung. Beside that, he also becomes an Instructor with field of expertise are Operation and Maintenance Switchgear, Planning and design electrical Installation, Feeder Protection,Generator Protection, Transformator Protection, Basic Power system Protection, Low Voltage Grounding (Sytem and Equipment) and also Maintenance High Voltage Equipment.