Training Ahli Kesehatan dan Keselamatan Kerja (AK3) Umum (Sertifikat Depnaker)

Training Ahli K3 (AK3) Umum
Hotel Grand Kemang, Jakarta |2 – 14 Mei 2011| Rp. 8.500.000,-
Surabaya |13 – 25 Juni 2011| Rp. 8.500.000,-
Hotel Grand Kemang, Jakarta  | 11 – 23 Juli 2011| Rp. 8.500.000,-
Hotel Grand Kemang, Jakarta | 19  September – 1 Oktober 2011 | Rp. 8.500.000,-
Surabaya |3 – 15 Oktober 2011 | Rp. 8.500.000,-
Hotel Grand Kemang, Jakarta  | 17 – 29 Oktober 2011| Rp. 8.500.000,-
Hotel Grand Kemang, Jakarta |14 – 26 November 2011 | Rp. 8.500.000,-
Surabaya | 5 – 17 Desember 2011 | Rp. 8.500.000,-
Hotel Grand Kemang, Jakarta | 19 – 31 Desember 2011 | Rp. 8.500.000,-

TUJUAN PROGRAM
Program pendidikan AK3 ini adalah program Depnaker untuk memepersiapkan ahli-ahli K3 di perusahaan yang dapat membantu mengembangkan K3 di perusahaan.

Merupakan bentuk seleksi atau penilaian khusus bagi seseorang atau tenaga teknis tertentu yang pernah mengikuti kursus petugas K3 (safety officer) atau kursus instruktur K3 yang berminat menjadi ahli K3 sebagaimana di maksud dalam UU 1 tahun 1970 dan peraturan pelaksananya dengan waktu penyelenggaraan sekurang-kurangnya 120 jam pelajaran atau selama 11 hari efektif.

 

SASARAN PROGRAM
Setelah menyelesaikan program ini, peserta diharapkan mampu :

• Menjelaskan tugas, wewenang dan tanggung jawab AK3


• Menjelaskan hak pekerja dalam bidang K3


• Menjelaskan kepada pengusaha bahwa upaya K3 menguntungkan bagi perusahaan


• Menjelaskan tujuan sistem manajemen K3 (SMK3)


• Menjelaskan sistem pelaporan kecelakaan


• Menganalisa kasus kecelakaan, mengetahui faktor penyebabnya dan dapat menyiapkan laporan kecelakaan kepada pihak terkait.


• Mengenal P2K3, tugas, tanggung jawab dan wewenang organisasi ini


• Mengenal pembinaan dan pengawasan K3 di tingkat perusahaan, Nasional dan Internasional


• Mengidentifikasi obyek pengawasan K3


• Mengetahui persyaratan dan pemenuhan terhadap peraturan perundangan di tempat kerja.


• Mengetahui persyaratan keselamatan dan kesehatan kerja di tempat kerja


• Mengetahui proses audit dan ruang lingkupnya untuk mengukur tingkat pencapaian

 

PERSYARATAN PESERTA

• Berpendidikan sarjana, sarjana muda atau sederajat dengan ketentuan : sarjana dengan pengalaman kerja sesuai dengan bidang keahliannya sekurang-kurangnya 2 (dua) tahun, sarjana muda atau sederajat dengan pengalaman kerja sesuai dengan bidang keahliannya sekurang-kurangnya 4 (empat) tahun.

 

MODUL PELATIHAN

• Kebijakan K3


• UU No.1/1970


• Dasar - dasar K3


• P2K3


• Kelembagaan K3


• K3 Penanggulangan Kebakaran


• Pengawasan K3 Listrik


• K3 Pesawat Uap


• K3 Bejana Tekan


• K3 Mekanik


• K3 Konstruksi Bangunan


• K3 Pengawasan Kesehatan Kerja


• Pengawasan Kesehatan Kerja


• Pengawasan Lingkungan Kerja


• Sistem Manajemen K3 (SMK3)


• Audit SMK3


• Manajemen Resiko


• Analisa Kecelakaan


• Analisa Kecelakaan/Statistik dan Laporan Kecelakaan


• Statistik Laporan KecelakaanStudi Kasus


• Praktek Inspeksi/Kunjungan Lapangan


• Seminar

 

INSTRUKTUR PELATIHAN
Intruktur yang akan memberikan pelatihan adalah instruktur Senior dari DEPNAKERTRANS dan Instruktur yang berkompeten dan berpengalaman di bidangnya.

 

SERTIFIKASI
Peserta yang lulus pada pelatihan ini akan diberikan sertifikat dan penunjukan Ahli K3 umum yang di keluarkan oleh DEPNAKERTRANS

 

JADWAL PELATIHAN

1. Jakarta & Surabaya, 4 – 16 April 2011 (dilangsungkan secara bersamaan di 2 kota)


2. Jakarta, 2 – 14 Mei 2011


3. Surabaya, 13 – 25 Juni 2011


4. Jakarta, 11 – 23 Juli 2011


5. Jakarta, 19  September – 1 Oktober 2011


6. Surabaya, 3 – 15 Oktober 2011


7. Jakarta, 17 – 29 Oktober 2011


8. Jakarta, 14 – 26 November 2011


9. Surabaya, 5 – 17 Desember 2011


10. Jakarta, 19 – 31 Desember 2011

 

LOKASI PELATIHAN

Hotel Grand Kemang (****)
Jl. Kemang Raya 2H Kebayoran Baru
Jakarta 12730 INDONESIA

 

Hotel Ambhara (****)
JL. Iskandarsyah Raya No. 1 Kebayoran Baru

 

INVESTASI

• Pendaftaran per peserta                                                        Rp. 8.500.000,- (JKT),  Rp.8.250.000,- (Surabaya)


• Pendaftaran & Pelunasan 2 minggu sebelum training                            Discount Rp. 250.000,-


• Investasi sudah termasuk Modul, Training kit, Soft copy materi, Sertifikat, SK Penunjukan Ahli K3 Umum, Lencana dari Depnakertrans RI, Rehat, Makan siang dan Souvenir

 

Aplikasi Microsoft Project dalam Perencanaan dan Pengendalian Proyek

Aplikasi Microsoft Project dalam Perencanaan dan Pengendalian Proyek

Manajemen Proyek Menggunakan Aplikasi MS Project

Banana Inn Hotel and Spa Bandung  / Carrcadin Hotel Bandung| 14-15 April 2011 | 08.30 – 16.30 | Rp 3.150.000,-/person
Banana Inn Hotel and Spa Bandung  / Carrcadin Hotel Bandung|19-20 May 2011 | 08.30 – 16.30 | Rp 3.150.000,-/person
Banana Inn Hotel and Spa Bandung  / Carrcadin Hotel Bandung|23-24 June 2011 | 08.30 – 16.30 | Rp 3.150.000,-/person
Banana Inn Hotel and Spa Bandung  / Carrcadin Hotel Bandung| 28-29 July 2011 | 08.30 – 16.30 | Rp 3.150.000,-/person

BACKGROUND
Proyek merupakan kegiatan sementara yang berlangsung dalam jangka waktu tertentu, dengan alokasi sumber daya terbatas dan ditujukan untuk melaksanakan tugas yang telah ditentukan. Dalam pengelolaan proyek, terjadi interaksi yang rumit antara faktor manusia, material, peralatan, metoda, dan modal. Oleh karena itu, agar proyek dapat berjalan dengan baik dan memenuhi kriteria di atas, maka diperlukan perencanaan yang baik (realistis) dan pengendalian yang dapat meminimalkan penyimpangan (varians).

Pada pelatihan ini akan dibahas aplikasi Microsoft Project dalam perencanaan dan pengendalian proyek. Pelatihan akan dilakukan dengan menyelesaikan suatu contoh kasus yang bersifat komprehensif.

 

PURPOSE

1. Memahami strategi dan organisasi proyek


2. Memahami perencanaan, penjadualan dan pengendalian biaya proyek


3. Mampu menggunakan aplikasi komputer dalam manajemen proyek konstruksi


4. Diskusi kasus-kasus yang terjadi pada masa project dan paska project


5. Pelatihan ini tidak hanya berupa teori belaka, tetapi lebih merupakan workshop sehingga setelah selesai pelatihan, peserta dapat memiliki suatu yang dapat diimplementasikan di tempat kerja

 

TRAINING METHOD
Pelatihan ini menggunakan metode interaktif, dimana peserta dikenalkan kepada konsep, diberikan contoh aplikasinya, berlatih menggunakan konsep, mendiskusikan proses dan hasil latihan.

1. 25% Theory


2. 75% Practices


3. Dynamic and interactive training presentation.

WHO SHOULD ATTEND

• Project Managers and Staff


• Project Cost Control Managers and Staff


• Budget Analyst Person


• Finance Managers and Staff.


• Project Finance Officers and Staff.


• Risk Management Unit Managers and Staff


• Operation Managers and Staff.


• Logistics and Supply Chain Managers and Staff.


• Procurement Managers and Staff.


• Business Development Managers and Staff


• Person who involve in cost control activities.

TRAINING SYLLABUS

Hari Pertama :

• Network Planning


• Mempercepat Proyek secara Efisien (Project Crashing Optimalization)


• Latihan 1 :
  
  
  
  • Work Breakdown Structure (WBS)
  
  
  • Hubungan Antar Aktivitas
  
  
  • Aktivitas Berulang/Rutin
  
  
  • Informasi yang Lebih Detail (Table & Task Information)
  
  
  
  


• Memasukkan Data Sumber Daya


• Latihan 2 :
  
  
  
  • Resource Conflict (Sumber Daya Tidak Cukup)
  
  
  
  


• Latihan 3 :
  
  
  
  • Resource Leveling (Efisiensi Sumber Daya)
  
  
  
  


• Memasukkan Data Biaya (Variable & Fixed Cost)


• Latihan 4 :
  
  
  
  • Perhitungan Biaya Aktivitas
  
  
  
  


• Mengendalikan Proyek Menggunakan Analisis Varians Terpadu (Konsep Nilai Hasil)


• Latihan 5 :
  
  
  
  • Tracking (Updating Status Proyek)
  
  
  
  


• Latihan 6 :
  
  
  
  • Menampilkan Tabel Analisis Varians Terpadu (Earned Value)
  
  
  
  

Hari Kedua :

• Membahas Sebuah Contoh Kasus yang Lengkap, meliputi :
  
  
  
  • Memasukkan Data Pekerjaan (WBS dan Hubungan Antar Kegiatan)
  
  
  • Memasukkan Data Sumber Daya
  
  
  • Memasukkan Data Waktu (Durasi)
  
  
  • Memasukkan Data Biaya (Variable & Fixed Cost)
  
  
  • Menilai Apakah Rencana Sudah Realistis atau Belum
  
  
  • Mengatur Ulang Rencana (Fine Tuning) yang Belum Realistis agar Menjadi Realistis (Resource Leveling & Overtime)
  
  
  • Membuat Baseline Berdasarkan Rencana yang Sudah Realistis
  
  
  • Memasukkan Data Perkembangan Pekerjaan dan Biayanya (Tracking Kemajuan dan Biaya Aktual Proyek)
  
  
  • Menganalisis Penyimpangan Proyek menggunakan Tabel Earned Value dan Kurva S.
  
  
  
  

 

LEAD FACILITATOR
Ir. BRAM ANDRYANTO, MT,
Seorang sarjana Teknik Industri Universitas Pasundan yang berpengalaman dalam bidang manajemen proyek dan menangani sistem komputer di Jurusan Teknik Industri Universitas Pasundan serta memperdalam pengetahuannya melalui program Master Teknik, dan juga merupakan staf pengajar di Jurusan Teknik Industri dibeberapa Universitas terkemuka di Bandung yang berpengalaman dalam memberikan In-Company Training, pelatihan dan seminar manajemen di bandung, Jakarta, dan Surabaya.

 

Date

• 14 –15 April , 2011,              08.30 – 16.30


• 19 –20 May, 2011,              08.30 – 16.30


• 23 –24 June , 2011,              08.30 – 16.30


• 28 –29 July , 2011,              08.30 – 16.30

Venue

Banana Inn Hotel and Spa Bandung




Investment :

April

• Rp 3.150.000,-


• Early Bird : Rp 2.950.000,- (Paid 4 days Before 14  April 2011)


• Group Price : Rp 8.400.000,- (3 participants from the same company)

May :

• Rp 3.150.000,-


• Early Bird : Rp 2.950.000,- (Paid 4 days Before 19 May2011)


• Group Price : Rp 8.400.000,- (3 participants from the same company)

June:

• Rp 3.150.000,-


• Early Bird : Rp 2.950.000,- (Paid 4 days Before 23 June 2011)


• Group Price : Rp 8.400.000,- (3 participants from the same company)

July:

• Rp 3.150.000,-


• Early Bird : Rp 2.950.000,- (Paid 4 days Before 28  July 2011)


• Group Price : Rp 8.400.000,- (3 participants from the same company)

Setiap Peserta diharapkan membawa laptop Untuk Praktik

 

IMPROVING YOUR BUSINESS BY OPTIMALLY MANAGE AND DEVELOP WEB BUSINESS

IMPROVING YOUR BUSINESS BY OPTIMALLY MANAGE AND DEVELOP WEB BUSINESS

Aryaduta Hotel Semanggi / Santika Hotel Jakarta| 12-13 April 2011| 08.30 – 16.30 | Rp 2.250.000,-

 

BACKGROUND
Dewasa ini bisnis apapun mengunakan media online seperti internet banyak bermunculan. Dengan membuat sebuah website maka bisnis kita akan jalan karena website di identikan dengan sarana iklan dan promosi, memperkenalkan usaha kepada siapapun tidak terbatas ruang dan waktu. Secara teknis banyak digali dalam buku-buku tapi tidak cukup dengan hanya baca buku tanpa mencoba membuatnya makanya pada kesempatan kali ini akan dibahas step by step untuk anda yang ingin berbisnis dengan media internet ini.

 

TRAINING METHOD
Pelatihan ini menggunakan metode interaktif, dimana peserta dikenalkan kepada konsep, diberikan contoh aplikasinya, berlatih menggunakan konsep, mendiskusikan proses dan hasil latihan.

1. 50% Theory


2. 50% Practices


3. Dynamic and interactive training presentation.

TRAINING SYLLABUS

1. Apa itu CMS Joomla?


2. Mengenal Joomla


3. Untuk apa joomla digunakan?


4. Persiapan Instalasi Joomla
   
   
   
   • Hardware
     
     
     
     • PC Pentium 4 2 Ghz ,memory 256 (rekomendasi 512 mb), Harddisk 40 GB,LAN or WLAN
     
     
     
     
   
   
   • Aplikasi Web Server EazyPHP
     
     
     
     • Operating System Windows XP
     
     
     • Apache Server + MYSQL Database (PHPMyadmin)
     
     
     • Internet Explorer atau Mozilla Firefox
     
     
     
     
   
   
   
   


5. Memulai Instalasi Joomla


6. Menjalankan EasyPhp 1.7


7. Administasi SQL


8. Membuat database joomla


9. Setup Joomla
   
   
   
   • Set User name
   
   
   • Set Password
   
   
   • Set joomla prefix
   
   
   • Set Database MYSQL
   
   
   
   


10. Menjalankan joomla


11. Administrasi Joomla


12. Pengelolaan Administrasi joomla


13. Mengganti Template Joomla


14. Menginstall Template


15. Menginstall Komponen


16. Menginstall Module


17. Manajemen User manager


18. Manajemen Banner


19. Menginstall Mambot


20. Setting SEO (Search Engine Optimization) pada Joomla


21. Training Evaluation for web developement

 

WHO SHOULD ATTEND

• Wirausaha yang ingin memulai bisnis dengan internet


• Karyawan yang ingin bisnis dengan internet


• Owner perusahan yang ingin mengonlinekan usaha yang dimilikinya


• Marketing


• Bussines Development.

 

LEAD FACILITATOR

Erwin Baharudin, S. Kom,

Praktisi dan Konsultan Manajemen Teknologi Informasi, yang berpengalaman luas dibidang Networking, Technical Maintenance dan Pemrograman berbasis web serta Seach Engine Optimizer (SEO) selama lebih dari 10 tahun di PT. PC 24, PT. MUWeb Solution, PT. Multi Daya Computer, PT. Rahajasa Media Internet, PT. Smart Intermedia Solusindo. Saat ini menjabat sebagai Direktur Utama sebuah perusahaan web developer dan toko online.

Pengalamannya sebagai trainer telah dimilikinya selama lebih dari 8 tahun. Berikut ini ada beberapa perusahaan dan instansi pemerintah yang pernah dan masih menggunakan jasanya  yaitu : PT. Graha Cipta Hadiprana, STP Lawfirm, PT. Amanja Mega Persada, Majalah HRD, PT. Spektrum Solusindo, PT. Timah Tbk, Balai Kesehatan Hewan DKI, PT. Anyar Indah, PT. SKN, PT. Encpro.

Date

12-13 April  2011             08.30 – 16.30

Venue

Aryaduta Hotel Semanggi / Santika Hotel Jakarta

Investment

Investment/Person : Rp 2.250.000,-  ( Full Fare )
Early Bird : Rp 2.150.000,- (Paid 5 days Before 12 April 2011)
Group Price : Rp 6.000.000,- (3 participants from the same company)

 

ELECTRICAL INSTALLATION IN HAZARDOUS AREA

ELECTRICAL INSTALLATION IN HAZARDOUS AREA

Bandung | May 3-6, 2011 | IDR 8.250.000,-/ Person
Bandung | July 26-29, 2011 | IDR 8.250.000,-/ Person
Bandung |November  15-18, 2011 | IDR 8.250.000,-/ Person

COURSE CONTENT

Explosive Atmosphere, origin and characteristic values

• Evaporation


• Convection, diffusion density ratio


• Flash point and combustion point


• Classification of flammable liquids into danger classes


• Explosive mixture of dust and air


• Exothermic chemical reaction and its characteristic values


• Ignition sources and their characteristic values


• Ignition flame


• Influence of electrical values


• Ex-groups, maximum experimental safe gap


• Ignition by hot surfaces

Regulation and Specifications

• Regulations concerning electrical installations in explosive atmosphere


• Definitions


• Potentially explosive atmosphere, electrical apparatus in acetylene plants


• IEC works

Type of Protection

• General, opening apparatus, terminals, cable and conduct entries


• Oil immersed equipments


• Pressurized appartus


• Flameproof enclosure

Intrinsic safety

• General specific constructional requirements


• Installation requirements for intrinsically safe circuits


• Tests

Planning, installation and operation of electrical systems in potentially explosive atmospheres

• Assessment of possible explosion risk


• Planning electrical installations for use in potentially explosive atmosphere


• Selection of apparatus


• Measuring and control equipment


• Lighting systems

Operation of electrical equipment in potentially explosive atmosphere

• General


• Operations of electrical equipment


• Instruction of persons


• Repair of explosion-protected electrical apparatus


• Repair work not affecting the explosion protection

Switchgear for use in potentially explosive atmospheres

• Terminals


• Protection against dust and wear,


• Types of protection for electrical switchgear

Lamps and Luminaires

• General, incandescent lamps, discharge lamps, high pressure mercury lamps


• Safety luminaires, portable lights, flameproof luminaires


• Pressurized luminaires

 

WHO SHOULD ATTEND

Managers involved with energy management, Electrical engineers and Technical Staff who have to deal with the aspect of electrical and industrial power system protection, control and operation.

INSTRUCTOR
Ir. Qamaruzzaman, MT graduated from Electrical Engineering, Bandung Institute Technology. He studied at Technische Universitaet Braunschweig, Federal Republic of Germany in 1979 to add has knowledge. He has been lectures and researcher at Department of Electrical Eng ITB since 1973. He has experience in PT. Sucofindo as senior Engineer for Perum Pelabuhan II Project, as senior Engineer, Feasibility study at PT. Spektra, etc. He is actives in IEEE Society Power Electronic, Industrial Engineer, ndustrial Application sine 1986.

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner.


• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.

Dress Code

Casual clothing is recommended. The training atmosphere is informal.

Facilities

• Quality training material (hardcopy and softcopy)


• Quality training kits included calculator, T-shirt or jacket, cap, ect.


• Interactive presentation with discussion


• Convenient training facilities with five star quality


• Lunch per day


• Morning and afternoon coffee / tea breaks for along the training


• Certificate of Completion


• Half day city tour at the end of training session following by dinner with entertainment  (optional)


• Exclusive flash disk.

Tuition Fee & Registration  Deadline

IDR 8.250.000,-/ Person, Registration deadline a weeks before training held.

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

Implementation of Electronic Filing and Document Management System

Implementation of Electronic Filing and Document Management System

Aryaduta Hotel Semanggi / Santika Hotel Jakarta | 22-23 September 2010 |08.30 - 16.30 | Rp 2.950.000,-/person

 

BACKGROUND

Era globalisasi dengan perkembangan teknologi informasi dewasa ini sangat membutuhkan karyawan yang menguasai konsep filing document management system, baik dengan metode manual ataupun dengan electronic process. Di dalam konsep tersebut sudah terdiri dari ; bagaimana mengelola hard document (paper document) dan soft document ( image document dan manual document).

Pengelolaan image document ( dokumen hasil scanning ) dan manual document (dokumen hasil dari suatu aplikasi, seperti dokumen word processor, spread sheet dan presentation) sangat penting diterapkan dalam mendukung kebijakan management document berdasarkan standar ISO 9001:2001/2008. Apabila konsep filing document management system sudah digunakan dengan baik dan benar dalam suatu organisasi, maka akan sangat membantu memaksimalkan proses pelayanan, baik kepada internal customer ataupun kepada exte(rnal customer, sehingga membuat image yang baik dan meningkatkan daya saing bagi organisasi tersebut.

 

PURPOSE
Setelah mengikuti pelatihan ini peserta diharapkan mampu untuk :

1. Memahami konsep manual filing system dan peralatan pendukukungnya.


2. Memahami konsep electronic filing system dan peralatan pendukukungnya.


3. Memahami faktor-faktor kunci strategis yang menunjang kesuksesan dalam penerapan electronic filling management system.


4. Memahami prinsip-prinsip dan gambaran procedure dari penerapan electronic filling management system.


5. Melakukan proses instalasi software Electronic filing di dalam computernya masing-masing.


6. Melakukan proses instalasi scanner yang digunakan melalui software Electronic filing.


7. Melakukan proses untuk aplikasi Records Management System, Electronic Document Management System dan Electronic Imaging System pada software Electronic filing.


8. Melakukan proses kontrol dokumen berdasarkan konsep ISO 9001:2000, proses distribusi dokumen dan proses updating dokumen pada software Electronic filing.


9. Melakukan proses pengiriman soft document e-mail langsung melalui software Electronic filing.


10. Melakukan proses penyelesaian studi kasus berdasarkan departement masing-masing.

 

TRAINING METHOD
Pelatihan ini menggunakan metode interaktif, dimana peserta dikenalkan kepada konsep, diberikan contoh aplikasinya, berlatih menggunakan konsep, mendiskusikan proses dan hasil latihan.

1. 25% Theory


2. 75% Practices (Step by step from using application electronics document management system software)


3. Dynamic and interactive training presentation

 

TRAINING SYLLABUS

1. Understanding of manual filing system concept and supporting tools.


2. Understanding of electronic filing system concept and supporting tools.


3. Understanding strategic key factors for success of electronic filing system implementation


4. Understanding principles and procedure illustration of electronic filing system implementation.


5. How using of Electronic filing operation steps for software Installation process.


6. How using scanner Installation process which electronic filing  application.


7. How using of Electronic filing operation steps for Records Management System implementation.


8. How using of Electronic filing operation steps for Electronics Imaging System implementation.


9. How using of Electronic filing operation steps for Electronics Document Management System implementation.


10. How using of Electronic filing operation steps for link of Records Management System and Electronics Imaging System.


11. How using of Electronic filing operation steps for Security Management Information System implementation.


12. How using of Electronic filing operation steps for Document Control process.


13. How using of Electronic filing operation steps for Document Distribution process.


14. How using of Electronic filing operation steps for Document Update process.


15. How using of Electronic filing operation steps for Document Sending which e-mail automation process.


16. Case Study from trainer and participants training.

 

WHO SHOULD ATTEND
Staff, Leader, Supervisor, hingga Manager yang bertanggung jawab dalam proses filing document

 

LEAD FACILITATOR
ERAWAN SUPRIATNA, S. KOM & TIM
Praktisi & trainer yang mempunyai pengalaman lebih dari 15 tahun menjadi instructor / trainer di beberapa lembaga pelatihan swasta, instansi pemerintah / swasta di Jakarta, mulai tahun 1992 - 2003, antara lain di PT. Asiana IMI Industries, Tbk., PT. COMBIPHAR, di PT. LG Philips Display Devices Indonesia, PT. LG Electronics Indonesia, PT. LG Innotek Indonesia dan PT. Harita Prima Abadi Mineral (Mining Company). Pernah menjabat sebagai Manager EDP dan Manager Training & Development di perusahaan swasta dan perusahaan jasa konsultan. Jabatan terakhir beliau adalah sebagai Direktur di PT. Target Digital Solusindo. Beliau juga pernah memberikan pelatihan sebagai berikut : Mastering Microsoft Excel 2007 : Beyong Basic For Office Automation, Powerfull Data Analysis & Dashboard Reporting with Ms. Excel 2007, COBOL Programming, RPG Programming, FORTRAN Programming, RDBMS With SQL 2000, System Analyst and Design, VB6 Database programming, VF9 Database Programming, IT Security, ITIL, COBIT, dan lain-lain. Selain itu juga beliau adalah praktisi pelatihan dengan metode quantum teaching, quantum learning, mind mapping dan NLP di bagian pengembangan sumber daya manusia (HRD Training & Development) selama lebih dari 7 tahun. Dengan perpaduan metode pelatihan seperti itulah, pelatihan seberat apapun selalu dibawakan secara ringan, jelas dan tuntas. Sehingga proses pelatihan berlangsung dengan menyenangkan dan mencapai tujuan yang diinginkan oleh peserta pelatihan.

Date

22-23 September 2010,              08.30 – 16.30

Venue

Aryaduta Hotel Semanggi / Santika Hotel Jakarta

Investment

• Rp 2.950.000,-/person


• Early Bird : Rp 2.650.000,- (Paid 5 days Before 22 September 2010)


• Group Price : Rp 7.500.000,- (3 participants from the same company)

Piping System & Pipeline Integrity with an Application to ASME B31 Codes & API579 (PASTI JALAN)

Piping System & Pipeline Integrity with an Application to ASME B31 Codes & API579

Novotel Hotel, Bandung | Sep 27 - Oct 1, 2010 | Rp.8.250.000,-per participant

 

OBJECTIVES

• The Participant will gain an in-depth knowledge of pipe and fitting material specifications, fabrication process and influence on mechanical properties of strength and toughness, to help in material selection and failure analysis.


• The participant will understand the technical background to the design equations, and their application to the design of piping systems and pipelines. The course addresses rules of good practice in layout of piping systems for reliable operation.


• The participant will gain a practical understanding of piping and pipeline corrosion mechanisms, how to recognize them, classify them and resolve them.


• The participant will be introduced to the latest techniques and research in piping and pipeline integrity to analyze a degraded condition due to either corrosion or mechanical damage.


• The participants will review case histories of field failures and will evaluate their cause and solutions to avoid recurrence.

WHO SHOULD ATTEND

The course is intended for engineers, maintenance technicians and inspectors responsible for the design, integrity, maintenance and repair of pipelines and piping systems.

COURSE OUTLINE

Day 1: Introduction, Material and Inspections

Welding

1. Introduction

• History of Pipeline Technology


• ASME Codes and Standards


• API Standards


• NACA, MSS-SP, PFI Standards


• Fundamentals of Maintenance and Integrity

2. Materials

• API 5Land ASTM Specifications


• Practical Aspects of Metallurgical Properties


• Chemistry and Material Test Reports


• Fabrication of Line Pipe and Forged Fittings


• Mechanical Properties: Strength and Toughness

3. Welding

• Overview of Pipe and Pipeline Welding Practice


• API 1104 and ASME IX Requirement


• Welding In-service: Challenge and Solutions

Day 2: Integrity for Sustained Loads

1. Operating and Design Pressure

• How to Establish the System Design Pressure


• Introduction to Pressure Relief Valves


• Pipe and Pipeline Sizing Formula with Applications

2. Layout and Support

• Rules of Good Practice in layout


• Pump and Compressor Piping


• How to Support a piping System


• Review of Support Types and their Application


• Lesson learned from Poor Support Practices

3. Temperature Effects

• Flexibility Layout Analysis


• Temperature Transients and Fatigue Damage

4. Vibration In Service

• Mechanical and Hydraulic Induced Vibration in Piping


• How to Measure Analyze Resolve Vibration

Day 3: Integrity for Occasional Loads

1. Pressure Transients

• Recognizing and Solving Liquid Hammer


• Pump Station Transients


• Study of Pipeline Failures Due to Transient


• Two-Phase Liquid -Vapor Transients


• Two-Phase Liquid-Gas Transients


• Gas Discharge Transients

2. Buried Pipe

• Soil Loads


• Surface Loads


• Expansion of Buried Pipe


• Soil settlement


• n-service Movement of Pipeline

3. Pipeline Failures

• Study Case Histories


• Understanding Why Failures Occur and How to Avoid Them

Day 4: Piping System Maintenance

1. Flange and Mechanical Joints

• Overview of Different Types of Flanges and Application


• Gasket of Bolt Selection


• Causes of Flange Leaks and How to Resolve


• Case Study of Flange Failure


• Assembly of Flange Joints and Leak Tightness

2. Pressure and Leak Testing

• The Difference Between Leak Testing and Pressure Testing


• Review of Difference Testing Techniques


• The Purpose of Hydro test


• How to Conduct a Hydro test


• Pipeline and Piping Systems Testing


• Pneumatic Testing

3. Repair Techniques

• The New ASME Repair Standards


• The Fundamentals of Repair package


• Pipe and Component Replacement


• Grinding and welding


• Welded Sleeve: Type A and B


• Flush Patch Repair


• Fillet Welded Patch


• Weld Overlay Repair


• Mechanical Clamp with Sealant Injection


• Mechanical Clamp without Sealant Injection


• Insertion Liners


• Painted and Brushed Liners


• Pipe Coating

Day 5: Corrosion, Assessment and Repairs

1. Corrosion

• Introduction to Practical Corrosion


• Classification of Corrosion Mechanisms


• General wall Thinning


• Local Corrosion: Galvanic Effects


• Crevice corrosion


• Pitting Corrosion


• Environmental Effects


• Hydrogen and H2s Effects


• Microbiological Corrosion


• Corrosion Protection


• Cathodic protection Overview

2. Mechanical damage To Pipelines

• Dents and Gouges


• Ripples and buckles

3. Fitness For Service Overview

• Application of ASME B31G to Determine Remaining Life


• Application of 579 to General and Local Corrosion


• Analysis of Dents and Gouges in Pipelines


• How to Evaluate cracks in piping and Pipelines

 

Instructor

DR. Ir. IGN. Wiratmaja Puja has 16 years continuous mechnanical engineering experience in failure and stress analysis, mining machinery and design as well as mechanical drawing and has been a consulting engineering expert in machinery and equipment maintenance for PT. Tambang Batubara Tanjung Enim, KONDUR Petroleum and PT. Kereta Api Indonesia. He also has served as an in-company training instructor for several major oil and gas companies such as PT. Badak LNG, PT. Freeport Indonesia, VICO and PT. Timah Tbk.

Mr. Wiratmaja has authored numerous publications and presentations related to mechanical engineering and mining machinery. He holds a M.Sc. and Ph.D. degree in Mechanical Engineering from the University of Kentucky, USA.

Schedule
Sep 27 - Oct 1, 2010
5 days

Venue
Novotel Hotel, Bandung

Tuition Fee
Rp.8.250.000,-per participant, excluding accommodation & tax.

ASME Pressure Vessel: Design, Operation and Maintenance (PASTI JALAN)

ASME Pressure Vessel: Design, Operation and Maintenance

Ibis Slipi Hotel, Jakarta |  3 - 7 Mei 2010 | Rp. 8.250.000,-

COURSE OBJECTIVE

• Be able to calculate, analyze both stress and strength in pressure vessel design


• Gain knowledge of proper material selection for pressure vessel application


• Gain knowledge of welding code standard, which includes inspection, and testing


• Gain better skill to operate, maintain, and repair of pressure vessel


• Perform vessel inspection & maintenance per the applicable Codes and Standards


• Familiar with instrumentation and control system commonly associated with vessel operation

COURSE OUTLINE

Stress and Strength Analysis Calculation Code

• Tube


• Tube-Sheet


• Shell head: Spherical; Hemispherical; Dished; Ellipsoidal; Torispherical; Conical; Toriconical


• Shell joint with head


• Shell joint with bracing and staying


• Ligament on drum and shell


• Openings


• Reinforcement on shell and flat plate


• Bolt on head


• Wind load


• Earth quake load


• Support structure


• Proof Test and Bursting Test

Materials

• Material characteristics


• Heat-treatment effect


• Effect of alloy additive


• ASME Material Code


• Type of material and its selection

Welding

• Type of welding


• ASME Welding Code


• Welding Procedure Specification (WPS)


• Post Weld Heat Treatment (PWHT)


• Quality control


• AWS Classification


• Weld joint efficiency


• Welding defect and repair

NDT (Non Destructive Testing)

• Welding Inspection


• NDT Selection


• Visual Radiography: Limitation; Code of weld joint radiography testing


• Magnetic particle


• Dye Penetrant


• Ultrasonic


• Eddy Current


• Acoustic Emission


• Destructive Testing

Operational Aspects

• Process characteristic consideration


• Start-up procedure


• Observation and shut- down

Instrumentation

• Code of instrumentation for: Pressure gauge; Temperature gauge; Flow meter; Level metering; Density


• Control: Manual, regulating and control valve; Sensor; Transmitter; Actuator and control


• ASME Code for control valve: Valve material; Valve selection; Installation; Setting and test


• Safety and Safety Devices: Alarm indicator, Interlocks; Hard restraints; Restraint of chemical reaction; Pressure relief valve; Pressure safety valve; ASME Code for safety valve; pressure and vacuum relief valve

Effect of Stress and Operating Condition on Pressure Vessel

• Fatigue cracking


• Hydrogen embritlement


• Hydrogen embritlement of welds


• Crack due to welding


• Creep


• Corrosion


• Type of corrosion on pressure vessel


• Pitting


• Crevice


• Inter-granular


• Fatigue corrosion


• Stainless Steel corrosion


• Corrosion inhibitor

Inspection, Repair and Maintenance

• Inspection: Inspection of internal and external physical data; Inspection preparation; Safety in performing internal inspection


• Inspection procedure


• Inspection interval


• NDT


• Hydro test


• Pneumatic test


• Leak test


• Stainless steel overlaid inspection and lined vessel


• Rotating roll inspection


• Low-pressure vessel inspection and heat exchanger


• Maintenance: Preventive maintenance high pressure plant; Predictive maintenance; Maintenance organization; Safety on weldment and cutting; Maintenance management; Maintenance supervision


• Repair: Pitting repair; Crack repair; Heat exchanger repair; Welding repair to stainless steel; Repair involving dissimilar metals; Management support of pressure vessel safety system

WHO SHOULD ATTEND

• Engineer, supervisor, superintendent, and manager of power plant, process plant in refinery, petrochemical, marine, pulp & paper, sugar cane, palm oil


• Maintenance and Operation Engineer, Supervisor, Superintendent


• Design Engineer, Mechanical Engineer, Process Engineer


• Everybody who wants to take benefits from this course

Instructor

DR. Ir. Tri Wibowo, M.Sc graduated from Metallurgy Engineering of Mining Department, Institute of Technology Bandung in 1979. After graduated from ITB he worked as Research Engineer. In 1985 he took master degree in Tribology of Metallurgy and Material Engineering Department, Vanderbilt, Nashville, Tennessee University USA and Five years latter he continued his study by taking PhD degree in Mechanic Metallurgy and Material Engineering Department, KU, Leuven, Belgie.

In his study periods he had a lot of experiences in industrial, for example, in 1980 he was a Research Engineer. In the same time he responsible for Material Identification, In-Situ Metallographic, Remaining Life Assessment and Failure analysis in refinery plants of many cases in oil and gas industries. From 1999 on, he is a leader of laboratory for failure Analysis and Remaining Life Assessment (FARLA)

As a matter of fact, he is a lecturer in Post Graduate on Manufacturing in Mechanical Department of ISTN (National Institute for Science and Technology). Other than teaching, he actives as a free-lance instructor for educations, trainings or courses in the field of material of selection, failure analysis and remaining life assessment, tribology and material testing. Mr. Wibowo is also active as member of Expert Committee in INDOCOR (Indonesian Corrosion Association) and Indonesian Engineer Association member (PII). Lot of his experiences in the field of failure analysis so he published many papers in the field of failure analysis, remaining life assessment, fatigue of metal, corrosion and related topics in journals, seminars or symposium in Indonesia.

Schedule
April 5-9, 2010
5 days

Venue
Ibis Slipi Hotel, Jakarta

Tuition Fee
Rp. 8.250.000,- per participant, excluding accommodation & tax.